Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Back in the saddle again...

Posts

Back in the saddle again...

#1

Back in the saddle again...

David

>After nearly 4 months of closing one shop and setting up in my home garage, I turned in my new location for the first time on Saturday. This was a dry piece of cherry burl that my friend in CT sent me some time ago. No the easiest piece to start out again on, but it was like riding a bike. I set up to handle the chips, but the dust is a whole different story. Sorry for the photo--taken outside in the shade, on an old shower curtain used for a drop cloth. Immersed in recycled Watco oil, then Beal buffed. A little conservative on this one: wall thickness 1/4" - 3/8", 10-1/2" dia. and 7-1/4" high.


img

Re: Back in the saddle again...

#2

Re: Back in the saddle again...

Mike Rubes, Apex, NC

>Hi David,

Nice piece. I'm not sure I would have been that brave after being away from things for a few months! Well done. That one looks really fragile to me, like it wouldn't have taken much for it to come flying off the lathe in multiple pieces :)

I hope things are well in Hawaii.

Mike

Done with holiday turning in Apex, NC!!

Re: Back in the saddle again...

#3

Re: Back in the saddle again...

Allen Neighbors

>Beautiful, fragile appearing, natural edged... conservative? I think it's grand! Welcome back, David, I've wondered where you were.

Glad you're back in the saddle again. :o)

Re: Back in the saddle again...

#4

Re: Back in the saddle again...

George Van

>Good to see you posting again David, you have obviously not lost your touch!