Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

My recent activity

Posts

My recent activity

#1

My recent activity

bowlman

>First, happy holidays to Ellis and all the wonderful WC'ers out there.

Well, here I am again. Things have been rather strange. My parents came down for Thanksgiving. Everything was fine. My 80 year old father had lung cancer surgery over a year ago, so I decided (finally) it was time for me to quit smoking as well. Since then I have had all the classic withdrawal symptoms ... cravings, tiredness, crankiness (some would say that's my normal state) ... lots of coughing and hacking and sinus problems. But, so far so good. I haven't had a serious relapse yet. Maybe this time will be the last time.

Then, my mother called this week to let me know that Dad had a falling down episode. Fell 2x on Saturday past and 6 on Sunday. Off to the doctor's on Monday. MRI shows he has had 2 strokes. So, we're keeping our fingers and toes crossed.

In addition, I have hired an electrician to add 20 amp circuits and a new sub-panel to my garage to handle the load of my tools. Each major tool will now have its own circuit and breaker ... and this time it all gets labelled!!!!!!!!!!!!!!!

This effectively isolates my shop from the rest of the house so if I trip a breaker, the TV stays on, the computer still works, and the ceiling fan doesn'y have a fit.

I have recently begun the process of upgrading my dust collection and air filtration from a simple shop-vac to a system that will include a Dust Deputy cyclone as a pre-seperator for the shop-vac, a real Jet 1.5 HP Dust Dog cannister with filtratration down to at least 2 microns, a JDS ceiling mounted air cleaner and filter, and several HEPA filters. All in all, I expect (hope) to have a clean shop without all the layers of fine dust covering everything.

Happy Holidays to all !!!!!!!!!!!!!

PS Your secret santa gift is on the way to ... did you all know that I really am Santa Claus, just disguised as a woodturner? Just ask Ellis or Jennifer, or Bill Grumbine or some of the otherw who know me.

Re: My recent activity

#2

Brad Vietje

Re: My recent activity

Brad Vietje

>Good luck with your adventures, Bowlman.

Even when there's nothing "concrete" we feel we can do with our aging parents, we can spend as much time with them as we can while they're here, and that can be the most helpful thing of all. My dad died of lung cancer 2-1/2 years ago, and watching him slowly disintegrate 15 years before his time was hard. He had also introduced me to woodturning, and was my turning buddy, and we shared every little woodturning success and failure from new chucks & gouges and burl discoveries to bowls that turned into funnels. So, I know what you're going through with your dad, as do many of us here.

I hope you can resist those cravings and stay smoke-free -- you're doing the right thing !

Best wishes for you and your shop upgrades, as well as your dad's health.

Brad Vietje

Newbury, VT

Re: My recent activity

#3

Roger in MO

Re: My recent activity

Roger in MO

>Hang in there. I quit about 20 years ago after smoking for over 30 years. Its tough but well worth the effort.

I can relate to aging parents. We recently moved my 93 year old mother from her own apartment to a residential care center. She is not a happy camper but thankfully recognizes she needs to be there (most of the time!) Frequent visits are benificial for her and for us.

Re: My recent activity

#4

As I am approaching or at that age

Don Henthorn

>and having dealt with the aging thing with both my parents, I can commiserate with anyone facing the parent problem. I know how it is. A weekly visit seems reasonable to the ones making the visit. It is a long, long time for those who have nothing to look forward to but those visits. I hate to go back to where my kids are because when I go into a home I would rather receive no visits than the once a week obligatory visits that most get. I know my kids want the best for me but it is depressing and no fun to visit someone often and watch them slowly go down hill.

The end is part of life and each of us has to deal with the realities of the situation and many of us are not capable of doing that. Doesn't make us better or worse, it's just reality. MHO.

Re: My recent activity

#5

Re: As I am approaching or at that age

Bill Crommett

>I never had the oportunity of seeing my parents get old, because they both died when I was yet young. I hope my kids are up to the task of handling my gradual decline, which so far they have laughed off. But I can feel it coming, and I hope I can get my lathe fixed and running before I have to give it all up. One of my biggest problems is ; When do I start liquidating my workshop to ease the problems left for the widow.

Re: My recent activity

#6

Keith Tompkins

Re: As I am approaching or at that age

Keith Tompkins

>Bill, don't liquidate your shop...managing to work in the shop as often as you can, even for brief moments, is good therapy for the mind, body, and soul. Once the shop is liquidated, what will replace it? I sometimes get comfort by just being in my shop, doing nothing. There are some good memories there. Nobody enjoys anticipating the end, yet it is inevitable....all any of us can do is enjoy one day at a time. Peace.

Re: My recent activity

#7

Liquidating the shop

Carol from AZ

>Hi Bill,

I spent last summer working at a retirement community, a very nice one, and a very expensive one. The issues are the same, but the best advice I can offer you with regard to liquidating your tools to make it easier on your spouse comes direct from a few 'horses mouth's'. I heard many complaints or words of regret with regard to gettng rid of things prematurely (before you actually have to). Bottom line, don't do it! If you want to keep your wife from the hassle of dealing with something about which she has lttle or no knowledge, simply pre-prepared for their disposal after the funeral.

If you want someone to have them, then put it writing. Have it notarized. You might consider a school program, a club program, siblings, children/grandchildren, a charity,or even me. :) Whatever.

If you desire to have your spouse sell them, you will need to itemized them now. Note purchase source,date and cost. Find a knowledgable executor for just that part of your "inheritance." A woodworking buddy or club, as an example. Instruct them to use your itemization with notation as suggested above. Call it a 'tool will." Keep you itemization up to date. A digital camera is good. Burn it all to a disk. In fact a digital camera is very good. Pictures will keep honest people honest. Also knowledgeable to the uninitiated! Also good for insurance purposes. Update your list everytime you balance your checkbook.

These suggestion are compliments of the fine people I spent the summer with.

Re: My recent activity

#8

Re: My recent activity

Rick Bane

>I would like to start out by saying that I lost my father and best friend five years ago. He passed suddenly one day from a heart attack. Since that point in my life everything has changed. I (as everybody who has lost a loved one)would give anything for one more day. I can say that I have no regrets about our relationship-he was my best friend. Reading all the postings makes me feel sad that some of you guys are facing this. I dont wish any of that on anyone-it is very hard. Especially facing the fact that we are all mortal and will someday pass along to a better place. I just hope he(my Dad)is the first one I see when I get there!! Sorry so long!

Rick Bane

Re: My recent activity

#9

Re: Liquidating the shop, Carol's RIGHT...

Ruth Niles

>I'm in good health with nothing that "runs in the family" to worry about but I have a list in my shop of what everything major is worth or who should get it when I fly away. I also wrote the url for Woodcentral along with the names, email addresses and phone #s of a few turning people they could ask for assistance.

Re: My recent activity

#10

Brad Vietje

BILL: I'm with Ruth and Carol...

Brad Vietje

>Bill,

What does your lathe need to make it useable ? Maybe we have some talent right on this list that can get you turning again while you're still well enough to enjoy it. Seriously -- there are some wonderful people that read this list every day, and some may even live near you -- If you ask, we may be able to help.

My dad left behind a large collection of woodworking tools, but he knew that there were relatives who might very well want to use the shop. Now that my dad's gone, just going there to look for a piece of wood, or to borrow a tool brings back all sorts of wonderful memories. I'd say keep your shop up and running as long as you are. Maybe you can appoint a trusted friend to carry out your wishes when the time comes, but I encourage you to enjoy all the "putter time" you have !

Safe spinning,

Brad Vietje

Newbury, VT

Re: My recent activity

#11

You're in good company! :-)

Clem Wixted, Jonesboro, AR

>

Re: My recent activity

#12

Amen to that. The worst mistake I made

Don Henthorn

>was to sell off my equipment. There have been dozens of times since when I needed to do a little job only ro remember that I didn't have th tools to do it. You won't get enough for the used tools to help you widow or anyone , but you will always be glad you can putter to help pass the time and also do some useful things. My wife was worried about my safety but when you are a short timer anyway it doesn't matter that much about safety.