Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Steady rest for hollow forms

Posts

Steady rest for hollow forms

#1

Steady rest for hollow forms

Chip in Plano

>I'm looking for vendor, design plan or picture links anyone can share on steady rest products/designs for hollow form turning. I have a 14" swing. I'm have sufficient supply of plywood and MDF.

Re: Steady rest for hollow forms

#2

Re: Here's my homemade one.

Allen Neighbors

>Made with rollerblade wheels, all thread. Let me know if you need anything else. :o)


img

Re: Steady rest for hollow forms

#3

Re: 'Nother view 

Allen Neighbors

>


img

Re: Steady rest for hollow forms

#4

Re: Steady rest for hollow forms

Mike from St. Clair Shores

>Chip,

Here's a steady rest that many of the turners in this area have, We found a local steel fabricating place that cut this 1/2 inch thick steel with lasers. They did cad drawings and had about 4 different ones for different lathe sizes. Mine is for a 20" swing. They cut out all the pieces for the steady, and also for the captured support at the tail stock end. Cost for the steel and all the cutting was $125.00. I then took all the pieces to a little welding shop by me and the welding cost $40.00. I hope that the picture is clear enough for you.

Mike


img

Re: Steady rest for hollow forms

#5

Re: Steady rest for hollow forms *LINK*

Rick Allen

>The Clark Steady Rest is the mac-daddy of hollow form steady rests. He even sells one that will accomadate multiple lathe swings. There is a VERY good chance that you will be turning on a lathe with a larger swing in the next few years.

Watch out for the price!


The Clark Steady Rest

Re: Steady rest for hollow forms

#6

Ric Taylor

Re: Steady rest for hollow forms *LINK*

Ric Taylor

>Chip,

I bought mine from Keith Clark, the OK Spin Doctor. He makes custom steady rests for any size lathe. I'm really happy with mine. Check out his website.

Ric


OKSpinDoctor

Re: Steady rest for hollow forms

#7

Andy DiPietro

Re: Steady rest for hollow forms *LINK*

Andy DiPietro

>Here is a Woodcentral link to the one Dominic Greco Built out of plywood.


http://www.woodcentral.com/cgi-bin/readarticle.pl?

Re: Steady rest for hollow forms

#8

Re: Steady rest for hollow forms

eliot d

>I never got around to buying the Spin Doctor"s (Dr. Keith Clark) massively-built steady rest. It's not cheap. I have his hollowing rig -- also built like a tank.

What I can tell you, though, if you have never dealt with Dr. Clark, is that the service and attention to detail is like nothing I have ever experienced. The man is more or less obsessed with delivering the best possible product , and hie will stick with you and follow up with you DOZENS of times,as necessary, to tweak things to your liking. At least, that was my experience.

Re: Steady rest for hollow forms

#9

None of the Spin Doctor's links works

Eddie Pacheco, San Jose, Ca.

>Looks like the site is down or has been shut down.

Re: Steady rest for hollow forms

#10

Ric Taylor

Re: None of the Spin Doctor's links works

Ric Taylor

>The website was working this morning. It appears that the server he uses might be down temporarily. Keep trying, it's a great website.

www.theokspindoctor.com

Ric

Re: Steady rest for hollow forms

#11

Re: Steady rest for hollow forms

albertabob

>Only in America!

bob

Re: Steady rest for hollow forms

#12

Re: Steady rest? Here's mine.

Al Crandall (N.E. of Indy)

>http://www.cicaaw.org/node/view/981

Re: Steady rest for hollow forms

#13

Two bowl steadys for hollow forms

David Staeheli

>Try two Oneway bowl steadys. Most steady rests significantly reduce available diameter you can turn. The Oneway bowl steady doesn't restrict you much. I started with one bowl steady, then said heck, lets try two! So far it has been working great! I've been turning up to 15" diameter and 16" long. Each steady runs about $100 plus shipping (shipping deals out there right now from Woodcraft and Craft Supplies). Plus you do get to use one bowl steady for what it was designed for.

Re: Steady rest for hollow forms

#14

Re: Two bowl steadys for hollow forms

jared

>remove xx for email

Hello I am familiar with the free shipping from woodcraft but have not seen the one from craft supplies. I have a couple of small things i wanted to order from craft supplies but have been holding off because of the shipping costs. How do I find the craft supplies offer? Thanks in advance Jared

Re: Steady rest for hollow forms

#15

Re: Two bowl steadys for hollow forms

George Van

>David, could you direct me towards Woodcraft and Craft Supplies shipping deals. I tried a search on Google and at the individual websites and could not find any.

Thanks, George

Re: Steady rest for hollow forms

#16

Re: Two bowl steadys for hollow forms *LINK*

Mkauder, Phenix City, AL

>I did the same thing and am very happy with that solution. When I am turning on the outside of a bowl, I can move the front steady out of the way, and still have the back one for support. But then when I hollow, I can have both in place for great support.

Mark


http://www.highlandwoodworking.com/index.asp?PageAction=VIEWPROD&ProdID=6380

Re: Steady rest for hollow forms

#17

Re: Steady rest for hollow forms

Sparky Paessler

>Here is what I came up with for my Jet 1236. It allows for a full 11.5" swing and supports fight where my hollowing rig is cutting while leaving room for the arm supporting the laser.


img

Re: Steady rest for hollow forms

#18

Re: Steady rest for hollow forms

DKWalser

>Sparky,

I like your design. Makes me wish I'd taken metal shop back in jr. high school!