Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Woodturning diary? *LINK*

Posts

Woodturning diary? *LINK*

#1

Woodturning diary? *LINK*

Robert D. Macgregor

>As a beginner (and only occasional) turner I've always been a bit embarassed about the inadequacies of my mono-tube lathe (and, of course, covetted something bigger and better!). Today I stumbled on this site and couldn't believe the effort this guy, presumably on a low budget, put into his monotube; I was really impressed with his inventiveness. See if you agree.

BOB


Wood turning (Lathe & Tool)

Re: Woodturning diary? *LINK*

#2

Re: Woodturning diary?

ben d.

>Can you believe.///::

He should have made the lathe from scratch judging from the tools he had use of to make all the attachments.

Some thinker

Re: Woodturning diary? *LINK*

#3

Re: Woodturning diary?

Carol from AZ

>That guy is incredible! It takes a while to go through the woodturning topic but it is fascinating! I bookmarked his home page. When I have more time I will explore more. His mind is to be admired!

Re: Woodturning diary? *LINK*

#4

Re: Woodturning diary?

Russ Fairfield

>Not necessarily a low budget with all of the metal machining he has done. That takes either a home shop with machining capability, or access to one. Unfortunately, after all of these modifications and additions, he still has a mono-tube lathe with all of its limitations.

Re: Woodturning diary? *LINK*

#5

Re: Woodturning diary?

Robert D. Macgregor

>As I went through his progressively more complicated modifications and additions, I expected to see him replace the tube with rails next!!

BOB

Re: Woodturning diary? *LINK*

#6

Roger in MO

My thought exactly NM

Roger in MO

>

Re: Woodturning diary? *LINK*

#7

Great link! -- Thanks --

Chuck Engstrom

>

Re: Woodturning diary? *LINK*

#8

Re: Woodturning diary?

dwr

>Sweet!

Given his space constraints, he has made great use of the mono-tube. I picked up a couple of tips he used/made that I can incorporate into two of my lathe set-ups.

Nice to see that even the Japanese scrounge parts and enlist help from friends. However, given the CAD drawings he made, I think he has a lot of skills that go unmentioned;)

He seems to have progressed in his turning skills quite rapidly. Should be an encouragement to every turner!

Thanks!!