Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Bill's Lathe Part 2 - longish & needing your help

Posts

Bill's Lathe Part 2 - longish & needing your help

#1

Bill's Lathe Part 2 - longish & needing your help

Carol from AZ

>Earlier this afternoon I got over to Bill's to look over his lathe and to see what was needed to get it going. It appears to be a very old (not necessarily bad!) 9" Delta Homecraft. It will take some cleaning. I got started on it. Bill only has the use of one arm and hand, so it is easier for me to do it. Besides I love getting my hands dirty!

The banjo and tool rest need some machining to flatten surfaces. Bill has machinist friends, so he will prevail on them. I got the tailstock apart. It was stuck. I started with WD-40 and 600 grit sandpaper. Things are cleaning up nicely. The bed is in good shape. It is also cleaning up nicely.

The headstock needs some work. The thread size is 3/4" & TPI unknown at this point. There is a jam nut that looks like someone used a pipe wrench on it at one (or more) times. I cannot completely remove the jam nut or mount a faceplate. I worked on the threads with a triangular file for a bit with no joy. The thing is the threads appear to be in good shape. Any thoughts? Should the jam nut come off? Anybody know what TPI this spindle might be? The inboard side appears to be righthand thread. The outboard side looks to be a lefthand thread. Sunday I will pick up a regular 3/4 nut and see if it will turn on. I also have a thread gage here, so I will take that along. Undoubtedly his machinist friends should have a die to chase the threads.

I did go to the Old Machinery site and download the manual for the Delta 955 lathe, which, given the pictures, appears to be what we have. Goes back to the '40's. An oldie, but a goodie, I think.

He has a motley collection of gouges, 1 half inch scraper, and no parting tool. Some of have never been used. One or two badly rusted. He has a 3450 RPM grinder with very coarse wheels. (See my question on Carole's grinding wheel post). We will have his son weld up a captured rig so he can turn with his one hand and arm. Thanks to Phil Joines for his input and pictures here. I will practice sharpening with his tools. Mine are in storage in Arizona. I did meet another fellow here that has a Wolverine jig, so I will be tracking him down! We'll try a sweptback grind rather than the blunt (my descriptive word) grind on them now. I'll have to study the grinds library! Hopefully that is an easier study than Biblical Hebrew!

He has a collection of face plates, only one of which looks like it may be a thread match and it is 8" in diameter! One dead center. One small drill chuck on a #2 (I think) taper.

I need to find a screw chuck to fit. Wally taught me waste blocks on a screw chuck. And this method Bill feels he can handle. There is an indexing pin that locks into the multi-pully. As soon as we figure out how to use the darn thing, he can lock the spindle and screw his waste block with his one hand. The indexing pin appears to be 'stuck' and it is not readily apparent how to use/loosen it.

I'd put a handwheel on it for my use. Easier on the hands than the open pully, which really ought to be covered for safety. Thought I'd get a lefthand nut & jamnut, turn a nice handwheel and epoxy one nut into it. Any other suggestions?

So, we ask the collective braintrust here for your input. Anything you know that we need to know?

Thanks, everyone. He is blown away by all of you and your interest in helping him get going.

I did take some pictures, but haven't downloaded them to see what I have yet.

Re: Bill's Lathe Part 2 - longish & needing your help

#2

Re: Bill's Lathe Part 2 - longish & needing your h

ad de Crom

>You are very brave Carol.

Nothing wrong with the thread, if it's rusty, spry WD40 on the thread, and use a steelbrush to clean it, also useble on other rusty surfaces. Very good that Bill have the support of a machinist.

Using in the first place a faceplate is not so bad, in earlyer times everyone works with a faceplate.And using a faceplate is still very safe.

How do you come along with the hollowing rig? I'm curious about that.

Regards. Ad

Re: Bill's Lathe Part 2 - longish & needing your help

#3

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>Hi Ad,

First we need to get the lathe functional. Then we will proceed with the hollowing rig. Actually, we are using the conventional hollowing rig designs and making one that Bill can use with his one good arm, to turn inside and outside. We will need to make inside and outside tool holders for him. Phil Joines sent some pictures.

Once the lathe is functional, we'll turn over the tool holder project to the machinist friends.

The threads are clean after filing. Jam nut still doesn't come off. :(

Thanks for your interest.

Re: Bill's Lathe Part 2 - longish & needing your help

#4

Re: Bill's Lathe Part 2 - longish & needing your h

Tom Libby

>I wonder if one of those nut splitter thingies would work. The other thng is the nut got on there, so the threads cant be so different that it cant come off. Have you tried super penetrating oil? It's great what you're doing, like to see his first project.

Re: Bill's Lathe Part 2 - longish & needing your help

#5

Thread size is: 3/4-16

T Daniel

>

Re: Bill's Lathe Part 2 - longish & needing your help

#6

Re: Bill's Lathe Part 2 - longish & needing your h

john lucas

>Carol if the thread size is 3/4x 16 I have a faceplate that is small that I'll give you. Can't remember the size, probably 2' to 3".

Is the spindle hollow all the way through? If it is, the nut may not be a jam nut. Sometimes nuts were put on the shaft to remove drive spurs because you can't knock them out from the back. If it's hollow a short way it may be a #1 morse taper.

I would recommend the nut splitter if it needs to be removed. I would also recommend a penetrant oil. WD 40 wasn't designed as a penetrant so it won't reach in to losen the nut. Pour some on the nut on both sides and tap it to create some vibration. Do this for a day or so and you'll find it will probably loosen up.

Re: Bill's Lathe Part 2 - longish & needing your help

#7

Re: Bill's Lathe Part 2 - longish & needing your h

don lewonczyk

>Carol, referring back to your orginal post on one arm turning, the article John Lucus remembered seeing was in the Woodturning mag May 2005 # 149. There are 2 web sites to visit, WWW.ableworkshop.com and the man's site the article was written about. WWW.chippypah-workshop.co.uk , the man Peter Howells is very enabled with out a lot of special equiptment. I think you'll find it informative. Don L

Re: Bill's Lathe Part 2 - longish & needing your help

#8

Re: Bill's Lathe Part 2 - longish & needing your h

Darryl Hansen

>Carol if the nut needs to come off get some "Liquid Wrench" it is a penetrating oil with graphite in it. You might also check with a local Occupational Therapist. What you are doing is what they do as a living...Darryl

Re: Bill's Lathe Part 2 - longish & needing your help

#9

Re: Thread size is: 3/4-16

Carol from AZ

>Thanks, Terry. That's helpful.

Re: Bill's Lathe Part 2 - longish & needing your help

#10

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>The nut is loose. I can turn it all the way to the headstock. I can turn it in the other direction until the face of the nut is flush with the end of the spindle. The 'nut' does not have flats. It does have pipe wrench marks. :)

The real problem (at this point) is that the one face plate that looks like it may fit won't turn on the spindle.

I tried dressing the threads with a trianglualr file. They look good, but apparently not good enough. As soon as we know the TPI for a fact, I'll chase the threads with a die.

Re: Bill's Lathe Part 2 - longish & needing your help

#11

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>Thanks, John. I'll let you know as soon as we know the TPI for a fact. I looked for screw chucks on the web last night. With shipping one will be more than $20! Sheesh!

Thankfully a small diameter faceplate will work almost as well. Bill will just have to get his son to mount his blocks for him. With a screw chuck, he could predill a hole on the waste block himself, put the screw chuck on the lathe, and thread the block on by himself.

Re: Bill's Lathe Part 2 - longish & needing your help

#12

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>Thanks, Don. I have looked at those sites. Amazing what a determined person can do. When I taught woodworking, I had a number of impaired people go through my classes. They never ceased to amaze me.

I am fairly clever with making the usual function unusually. Wrote a book once about using a router with innovative jigs. :)

And I don't mind coming home with rust and WD-40 under broken fingernails! :)

Re: Bill's Lathe Part 2 - longish & needing your help

#13

Re: Bill's Lathe Part 2 - longish & needing your h

Larry In Lima

>Most car repair places have nut splitters, maybe you can borrow one? Larry

Re: Bill's Lathe Part 2 - longish & needing your help

#14

Re: Bill's Lathe Part 2 - longish & needing your h

D Putland

>Carol

The fact that the nut turns until flush with the end of the spindle indicates that the end of the spindle is flared or the last one or two threads are damaged.

Another indication to that fact is that the face plate will not turn on.

Denis

Re: Bill's Lathe Part 2 - longish & needing your help

#15

Re: Bill's Lathe Part 2 - longish & needing your h

John Lucas

>I agree. look at the end carefully and see if somehas has tapped on it with a hammer. The threads may be mushroomed. If they are a faceplate won't fit on.

Re: Bill's Lathe Part 2 - longish & needing your help

#16

Re: Bill's Lathe Part 2 - longish & needing your h

Jim Swank

>Carol -

I completely agree with Dennis. If the nut will turn to the end but not off it, the end of the shaft is flared or mushroomed. This could have happend from striking the end with a hammer or driving stock onto a live center while it was in the lathe. If the nut will turn to the end before sticking, it is not too bad. See if one of the machinist friend has a 3/4-16 die, which should be able to bring it back to size.

Re: Bill's Lathe Part 2 - longish & needing your help

#17

Re: Bill's Lathe Part 2 - longish & needing your h

Jim Rutten

>I know this may sound stupid but can't you just put a ruler next to the spindle and count the number of threads in an inch. That should verify whether it's 3/4 X 16.

Re: Bill's Lathe Part 2 - longish & needing your help

#18

Re: Bill's Lathe Part 2 - longish & needing your h

Stuart Johnson

>Carol, you can make up a screw chuck using a lag screw and a scrap block attached to a faceplate. Right or wrong the way I would do it is attach the block with just two screws. Use a jacobs chuck in the tailstock to drill the proper sized hole. Remove the the block and epoxy in the lag screw. You depending on the faceplate you might need to counter sink it flush Reattach the faceplate being certain to use the original holes plus the rest of them. Cut the screw off the the proper length.

Re: Bill's Lathe Part 2 - longish & needing your help

#19

Better Yet

Al Kapocius

>Lay a piece of paper over the threads and rub with a pencil. Measure and calculate threads per inch while comfortable in your armchair.

Al Kapocius

Re: Bill's Lathe Part 2 - longish & needing your help

#20

Re: Bill's Lathe Part 2 - longish & needing your h

gil jones

>Carol,

Are you sure that the "flat-less" nut is in fact a nut, and not a retainer for the bearing, or a maybe a flat surface for screw-on attachments to butt-up against so they do not contact the bearing?? Also, if the threaded part of the spindle is too long, that "nut" may provide a flat stopping point so the spindle does not bottom-out inside the chuck or faceplate. Just a thought. Still, it would be good to be able to remove it.

Gil

Re: Bill's Lathe Part 2 - longish & needing your help

#21

Re: Bill's Lathe Part 2 - longish & needing your h

Wally Dickerman in Arizona

>Carol, I really admire what you are doing for Bill...and also yourself, because I can tell that you're enjoying this.

I looked at the website with the drawings and parts list for the 955 lathe. Looks like 30's or 40's. Hey, according to the parts list you could buy a complete headstock for $9.50. The drawing doesn't show a retaining nut on the spindle. It doesn't say, but I'm quite sure the spindle threads are 3/4 x 16.

It seems to me that Bill should call on one of his machinist friends to check on the spindle threads, and do whatever is necessary to put them in working order. As just about all lathes were in the old days, this lathe was designed for spindle turning. It recommends a 1/3 HP motor, which would be okay for spindle turning but is too small if Bill wants to turn 8-inch bowls.

I agree that it needs a handwheel. All lathes do. A little searching should produce a left-hand threaded nut to fit the outboard spindle. Perhaps the machinist can help on this.

Carol, let me know if I can help in any way on this project.

Wally

Re: Bill's Lathe Part 2 - longish & needing your help

#22

Re: Bill's Lathe Part 2 - longish & needing your h

Wally Dickerman in Arizona

>According to the manual, when using a 1750 RPM motor, the speed range is 900 to 3400. When turning a 7 or 8-inch bowl the low speed of 900 is okay to start if the blank is bandsawed round and is close to being in balance. The next speed is 1400. That's also okay to turn small bowls.

Wally

Re: Bill's Lathe Part 2 - longish & needing your help

#23

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>Thanks, Wally. I really appreciate it. You are right. I am having fun with this. He offered the use of his lathe to me because I am stuck here (my choice) without tools. He indicated he didn't think he could make use of it, but was willing to get it going so I could use it! What generosity! We got to talking about captured rigs and decided to give that a go between the two of us.

I will be PM'ing you with a chronological list to mount and turn pieces so that Bill (and I) will have a definitive how-to list. It's been a while since I was in your shop. I am not willing to solely trust my memory at this point, and I have little time for experimentation.

Re: Bill's Lathe Part 2 - longish & needing your help

#24

Re: Bill's Lathe Part 2 - longish & needing your h

Carol from AZ

>Haven't checked the motor yet, except to know that it runs. Seems to me I saw the spindle speeds as lower on that old manual. I will have to check again. I do know how to change pulleys and calculate RPM's. That will be a topic for another thread, I guess. :)

Re: Bill's Lathe Part 2 - longish & needing your help

#25

Homemade wooden faceplates

OB O'Brien

>Carol; Instead of buying and or making faceplates for Bill's lathe.

Get a drill and a 3/4 by 16 TPI tap. Take a 4 or 4 inch diameter disc of 2 inch thick wood. drill and tap a hole in the center. Screw it on the lathe all the way down tight, face it off, flip it over and do the same on the other side. Now just glue whatever you want to turn, onto the wooden faceplate and turn away. You have a reusable, cheap faceplate thats also a waste block. Make several. If you don't have the tap, let me know and I'll make some wooden faceplates and send them to you. OB