Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Harbor Freight moisture meter/DNA

Posts

Harbor Freight moisture meter/DNA

#1

Harbor Freight moisture meter/DNA

Ed Moore

>I just noticed that Harbor Freight has a $20 two pin moisture meter on sale.

1. Has anyone used one of these and is it a good meter?

2. If a large roughed out red oak bowl 1 - 1 /4" thick soaks overnight in denatured alcohol and is then drained for a few days, how long before this bowl might be ready to be returned?

Thanks,

Ed

Re: Harbor Freight moisture meter/DNA

#2

Re: Harbor Freight moisture meter/DNA

Ralph

>I have one and it does work, does it work better then a $200 meter, probably not. But it does allow you to get a relative level.

As to DNA, about the same as if you hadn't soaked it in DNA. Note, several proponents of DNA (Fred Holder, etc) did side-by-side tests tests of rough bowls (from the same log), where some were soaked and others not. What they found was that, while the DNA soaked blanks lost initial weight faster, they didn't reach dry weight much (if any) faster then the un-soaked blanks. Didn't sound like it was worth the effort to me, so I keep air-drying or microwaving.

Re: Harbor Freight moisture meter/DNA

#3

Re: DNA no faster than unsoaked bowls

Dinyar Chavda

>Ralph:

I am curious about two things. First, has Fred reported his findings anywhere? Secondly, did he (and others who did side-by-side comparisons) find any differences in terms of the tendency of the wood to split between the two drying approaches.

Thanks

D

Re: Harbor Freight moisture meter/DNA

#4

Re: Harbor Freight moisture meter/DNA

Ed Moore

>Thanks, Ralph.

I started to order the HF moisture meter and the shipping of $8 made me decide to wait until I was near the store to try and pick one up.

I guess my "get dry quick" hopes are greatly diminished. Being a somewhat impatient person, I'm foiled again. ;^D

Thanks,

Ed

Re: Harbor Freight moisture meter/DNA

#5

Re: Harbor Freight moisture meter/DNA

Mike from St. Clair Shores

>I have just recently started to DNA soak my bowls, and find that they are ready to finish turn in about two weeks. One thing that was stated in the original post was the wall thickness at 1 1/2 inches. Thats to thick for DNA soaking. Read Dave Smith's articles because he is the main man when it comes to this. You must also wrap the bowl with paper and cut out the opening for it to work properly. I've done chestnut, cherry, ash, box elder and maple. No splitting has occurred. This really works when done according to steps that Dave lays out.

Mike

Re: Harbor Freight moisture meter/DNA

#6

Re: DNA no faster than unsoaked bowls

Ralph

>Fred posted over in rec.crafts.woodturning, which lead to some other posting done in AAW. I was not surprised, as I was having trouble figuring out how DNA would effect anything, except intercellur (sp, between cells) moisture. They did find that the early weight loss was faster, but that it slowed and the blanks hit stability at about the same time.

I don't recall any findings on stability, splintering, etc

Re: Harbor Freight moisture meter/DNA

#7

Thanks

Dinyar Chavda

>