Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Whats your "dream setup"?

Posts

Whats your "dream setup"?

#1

Whats your "dream setup"?

Devon Palmer

>Since the season of "giving" is coming up, I thought self indulgence would be a good topic of discussion :)

If you had $25,000 (or a little more) to spend in your shop, how would you spend it?

My toylist would include:

2436 Oneway w/ 3hp, SS ways

+ Bed Extension (maybe, have always been interested in Columns)

+ Large Outboard turning bed, tailstock riser and large banjo

Central Cyclone Dust Collection

Sawstop Circular saw (5hp, arr arrr arr arrr)

24" Powermatic Bandsaw

37" Supermax drum Sander

Turbinair HVLP sprayer

Extra chucks

4 Jet mini lathes for developing a turning program for "at risk" kids (kinda a dream of mine, hopefully before retirement in 30 years)

Prolly more than 25k by the time you get the right accessories, like the right blades, etc. But hey, gotta do it right. If there was money left over, would travel and take classes from Alan Batty, Hans Weissflog, Mike Darlow, and Dale Nish for starters.

- Devon Palmer, Columbus Ohio

Re: Whats your "dream setup"?

#2

Re: Whats your "dream setup"?

Hooligan

>Robust Lathe.

PM 66 5HP

Laguna LT37

Performax 22-44.

And I am about three grand over. :(

Re: Whats your "dream setup"?

#3

Re: Whats your "dream setup"?

john lucas

>I agree with Hooligan. 25,000 ain't gonna do it. I want the big Stubby, an under the floor dust collection system, PM66 table saw, 8" jointer, 20" planer, 20" drum sander, 20" disc sander, 24" bandsaw, The biggest compressor I could get my hands on, I've been looking at Drill presses and the new PM looks awfully nice. Of course I would like metal lathe, milling machine, welder, Forge, and a building to put all this stuff so I could make and modify all the machines and gadgets to go with them.

Re: Whats your "dream setup"?

#4

Keith Tompkins

Re: Whats your "dream setup"?

Keith Tompkins

>Hey Devon, great topic! Since we're dreaming....first a Woodmizer portable sawmill. That I would use to saw logs to construct a new studio, complete with classroom space and a solar kiln, and a gallery in the loft. Three-phase wiring in the shop, naturally.

Then, I would locate my dream equipment....An Oliver table saw with sliding crosscut table....three phase, of course. These old beasts were massive, and so smooth in operation that you had to check twice to be sure it was running...absolutely indestructable. Nothing else I've used even came close.

I did purchase a Walker-Turner drill press...which I totally rebuilt (not that it needed it) Serial #: 0001! A gem. A W-T or Oliver bandsaw would be a nice accessory.

Dream lathe? A new General, built to my specs...

Re: Whats your "dream setup"?

#5

Re: Whats your "dream setup"?

robo hippy

>Oh! This is just for toys to go in the shop. I need a bigger shop. A truck with a lift for logs, a Woodmizer, vacuum kiln, a shop just for wood storage, my own private forrest that was planted for me by my parents about 100 years ago, a bigger chainsaw, a bigger bandsaw, just to name a few.

robo hippy

Re: Whats your "dream setup"?

#6

My Dream...

Jim Shaver Oakville, Ont.

>A Dream Shop,

Wow, where do you start? I used to think that a shop was about machines and tools when I first started, all the toys I could buy to make me who I hoped I would become. Time has taught me some other details matter more than the fillings.

I guess several things come to mind, but I would like to have a few things to help my setting feel comfortable.

I would like a space with ample natural light, I find working in a closed garage has driven me to wanting to be able to enjoy the outside and the inside of the shop. Being able to see beyond the walls sometimes allows you to feel less confined. Heat�, yes heat�perhaps a stove or radiant heat, but anything that would make he feel relaxed and also allow my tools to not chill as the season changes.

A natural work space that is located in an independent building as well, that feels as good to look at from the outside as it does to be inside it!

A space that allows work to be done in a layout with a turning studio, an assembly space, a machine room and a bench room too. A room with a proper space for wood storage and even a finishing space. A space where two people could share if you wanted to have some one over, and not trip on top of each others work.

Dust control and lighting that makes it a safe and clean space to work in and also a small washroom/shower to avoid bring wood shavings into the house. I can see a shop with a split level, perhaps about 1000 sq feet or so.

Machines, tools and all the additional extra�s are not as important to me as the environment and the feeling the space can give you�

Cake care

Jim

It's in my plans, It will happen..

:-)

Re: Whats your "dream setup"?

#7

Steven Antonucci

A shop building would eat that and more...

steve antonucci

>I would have my one car move into a 20x30 out building with power in the walls (not staple on the outside like it is now.) The building would be able to open at both ends to allow for air circulation, and would have dust collection. It would be timber framed, with lots of big windows for natural light.

With the last $1, I would buy the winning lottery ticket, so I actually had the time to use it.

Steve

Re: Whats your "dream setup"?

#8

Re:Don't want to derail this but...

Hooligan

>Keith,my cousin and I went in together on a LT40H, and it was the greatest investment as far as lumber goes. He lives in an area full of Oak, walnut, and birch. As well, a ton of spruce, smaller fir, and lots and lots and lots of Eastern Aromatic cedar. Prior to the LT40H, he had an LT28, and it would do more than enough. He bought his first WM mill, a LT10, and found out very soon that it was not enough....

Anyhow. The WM mills are good ones for sure, and I second that, only I'd go all out, if I could, and get the LTSuper70......

Re: Whats your "dream setup"?

#9

Re: My Dream...

Peter Hyde

>Jim,

I'm with you 100%. I keep hacking away at my old garage and improving it a bit at a time, but it would sure be nice to be able to start from scratch knowing what I know now!

Re: Whats your "dream setup"?

#10

Dick Hines

Re: Whats your "dream setup"?

Dick Hines

>I perty much have all the tools I need so I would spend it on a new truck to haul wood. OR, spend it on Australian burls. OR why not buy a new motorcycle?

Re: Whats your "dream setup"?

#11

Re: Whats your "dream setup"?

Thad

>That $25,000 would be spent on new curtains, blinds, picture frames, and any other wall hanging object that would keep SWMBO busy in the house plenty long enough to allow me to finish at least one turning project. The under-the-floor dust collection system is a great idea though, I may have to do this as my father and I are about to built a shop I'll inherit.

Re: Whats your "dream setup"?

#12

I'm living my dream right now

Mike from St. Clair Shores

>Devon,

I have a wonderful workshop about 17 miles from my home (far enough to that I can't hear anyone calling for me to do this or that) I bought the bldg. 25 years ago. It came with an 80 gallon compressor and a 3 phase buss duct system. Most of my major tools are 3-phase and are made by Delta when they still made good tools. I added a Murphy-Rodgers dust collection system with a 7" main and 5" drops for all the tools. Some of the larger tools are a uni-saw with a joint-tec fence with 7' table, 8' jointer, 14" planer, 14" radial arm saw, 5hp shaper, 14" band saw with riser, 20" drill press,25" X 2 supermax drum sander, 12" x 48" sander, PM3520A and a delta midi. It also has a 10' x 8' paint spray booth.

So, if I were to have $25,000 to spend I think I would add a 2436 oneway with outboard turning capabilities, and a stubby. Any left over money would be spent on wood to turn with.

I feel very lucky to have this Man-Cave as one of my fellow turners calls it and thank my wife for helping me to live this dream.

Mike

Re: Whats your "dream setup"?

#13

Brad Vietje

That'd do just fine. Could skip sander though.

Brad Vietje

>

Re: Whats your "dream setup"?

#14

Brad Vietje

OR...

Brad Vietje

>...maybe I'd settle for about 10 acres of land with an incredible assortment of hardwood burls to "manage" with chainsaw and lathe, and just use the tools I have, (with an upgrade in the bandsaw and chainsaw department). Since we're dreaming here, I mean burls on nearly every tree...

I 'spect that'd be an OK deal...

Ummm... Cherry burls, Maple burls, Ash burls, Yellow Birch burls, Boxelder burls, Ironwood burls, Oak burls... heck, I'm getting pretty excited here -- I gotta get some air !

Brad Vietje

Newbury, VT

Re: Whats your "dream setup"?

#15

JL

Re: Whats your "dream setup"?

JL

>Sawstop

8" jointer with parallelogram bed (Powermatic or DJ-20 preferably).

3 hp Cyclone

Drum Sander

15" Planer

The big General with the bed extension (26020VDR with a 60" bed extension) - then I can turn bedposts without putting in connectors.

Do I have to give the rest of the money back?