Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Survey: Biggest challenges to getting "better"?

Posts

Re: Survey: Biggest challenges to getting "better"?

#26

Re: Rick, Where Do You Live?

Rick Davenport

>Barbara,

I live in the Pacific NW.

I have befriended a tree topper and now have lots of wood.

The catch is it's all in various stages of green.

In a year or two, I will have an array of species in a variety of drying stages that will give me the flexibility to turn what I want, when I want.

Then I can be the envy of all new turners who are stuck between purchasing stock at high prices or turining strictly green wood.

R

Re: Survey: Biggest challenges to getting "better"?

#27

Re: Heat

Peter Hyde

>Jim, you and I live in the same area and I had the same problem. I use the same orange construction heater and finally gave in and put insulation in the roof. It has made a lot of difference already and will be interesting to see what it's like when the temperature hovers around -20C. Shop/garage is 14ft x 22ft with no ceilings.

Re: Survey: Biggest challenges to getting "better"?

#28

Re: Heat

Bob Fawcett

>If you guys ever buld again, check out ICFs insulating concrete forms. They are extremely efficient insulation.

Re: Survey: Biggest challenges to getting "better"?

#29

Re: Survey: Biggest challenges to getting "better"

Allen Neighbors

>Learning tool control... not by seeing it done, but by just 'hearing' how to do it... no other turners withing 100 miles.

I have yet to learn how to use a bowl gouge on the interior of a bowl. Just can't keep it from catching, so I mostly use my Oland Tools. I guess I need a different grind.

Next is learning form and design. I'm seeing better, but not as well as I want to. :o)

Re: Survey: Biggest challenges to getting "better"?

#30

Re: Survey: Biggest challenges to getting "better"

Carole Valentine

>Al, do you have Bill Grumbine's video? If not, get it. You won't have a problem with that bowl gouge again. If you have already watched it and still can't use the gouge on the inside of the bowl, I don't know what to tell you! LOL You are going to O.B.s so make it a point to take YOUR gouge and get with someone there who can help you. You do beautiful work. I can't imagine you having a problem using a gouge on the interior of a bowl.

Re: Survey: Biggest challenges to getting "better"?

#31

Re: Rick, Where Do You Live?

Barbara Gill, Remlik VA

>Too fae away for me to share. :-)

Re: Survey: Biggest challenges to getting "better"?

#32

Re: Rick, Where Do You Live?

Mike Brazeau

>Rick - start processing some of that wood into spindle material or larger blanks for Hollow forms. You will be surprised how quickly it accumulates. I have been turning some into cylinders and waxing the ends with melted wax in an old electric frypan. Small stuff you can just split off and round on the lathe, larger stuff bandsaw. Sticker it on shelves and away you go. Dries up very quickly. I am running out of room to store it!

Mike

Re: Survey: Biggest challenges to getting "better"?

#33

Re: Heat (Bob Fawcett)

Peter Hyde

>Build Again!! Do you have any idea what I've gone through making a sub standard carport/garage/garbage container into a warm cozy shop? My turning time would be reduced to 0.

Seriously Bob I would love to build again but just can't do it. Also I would probably use SIPs (structural insulated panels) as per TOH did in one of their series.

Re: Survey: Biggest challenges to getting "better"?

#34

Blanks drying

Mike Brazeau

>Here is a shot of one the shelves I have in my furnace room. I find wood that has been in my yard for a 6-12 months or so, will dry down in a couple of months. I just did some fresh box elder and have put in my garden shed until the smell of horse p... goes away. Here the largest squares about 5x5x12 are some honey locust cut in 2003 and blanked a year ago, spalted maple, spalted beech, russian olive that was absolutely soaking wet and dried in 6 weeks. Almost no splitting except for beech. I mark the weight and date on it and weigh whenever I get the urge to do so and record it on the wood. I have a cheap moisture meter that bottoms out at 8% and they quickly get to that state on the outside. My wife looked at my pile in the yard a few months back and said "How long do you think you are going to live?"

Mike


img

Re: Survey: Biggest challenges to getting "better"?

#35

Good Points All

Rick Davenport

>I am continually working my stock, cutting, splitting, sealing, etc.

It still takes time, and is an obstacle for fairly new turners.

As the months and years go by, my stash will be formidable.

Don't take my post as whining for wood, I'm just saying that established turners have the luxury of a rotating stock.

Someday soon, I too, will be sitting in the lap of luxury!

;-)

R

Re: Survey: Biggest challenges to getting "better"?

#36

Forgetting the "Golden Rules of Turning"

Brian Hahn in SW Wisconsin

>The "Golden Rules of Turning" start with:

"1. Turning should always be fun."

When I start taking it too seriously, it stops being fun. Why do it when it's no longer fun?

Turning is a hobby for me. I have enough other hobbies that I don't need to (and won't) waste my time on a hobby that is no longer fun.

It is difficult to make progress on something that I'm not doing.

Re: Survey: Biggest challenges to getting "better"?

#37

Re: Heat (Bob Fawcett)

Bob Fawcett

>When I built my house in 2001-2, I used ICFs. I have seen them on some of the HGTV shows, and I think TOH did one also. They are hollow foam blocks 16" tall x 48" long. Width is the same as a 2x10. They stack together with a tongue and groove type fit. Stack them up to make the exterior walls, add some rebar and pore concrete in the middle. You have a reinforced concrete wall with at least 2" of foam insultation on each side (interior and exterior). R value is at least 50. My heating/cooling bill is 1/2 to 1/3 of what others in my area pay.

Re: Survey: Biggest challenges to getting "better"?

#38

Interesting question

keith zimmerman, Normal IL

>For me, it is a matter of time and motivation. I don't have any problem getting into my "shop," I walk past it everytime I walk from my bedroom to my kitchen and vice-versa. It's usually about stopping with an intent in my mind. By the time I get home from work, my mind is quite often mush and I need to unwind. Of course, outside events have a tendency of limiting the time too. There are times that I don't have a free day or evening for weeks.

Lately, I have begun turning pens. I love the idea that I can complete a project in a session. Being able to do this helps increase the motivation factor and I find that I want to delve more into other, more complex projects.

One thing I never do is try to force myself to turn something when I am tired. It is too easy to make an error and have a major accident.

keithz (unable to turn anything until at least the 14th)

Re: Survey: Biggest challenges to getting "better"?

#39

Rick, use Dave Smith's alcahol method

Don Henthorn

>of drying wood and you can be turning constantly in a couple of weeks. See the archives.

Re: Survey: Biggest challenges to getting "better"?

#40

Re: Survey: Biggest challenges to getting "better"

Allen Neighbors

>Carole, I've been intending to get Bill's video, and I think that's next on my agenda. We had a craft show today. :o) Got another one next weekend. :o)

I sure do need some help on the bowl gouge. Don't know which one to get first, but think it will be #1. Is there anything in there about grinds?

Re: Survey: Biggest challenges to getting "better"?

#41

Re: Survey: Biggest challenges to getting "better"

Carole Valentine

>Don't remember if he talks much about grinds or not. I know he used a very swept back grind. Don't think it was quite as swept back as mine, but close. There is a grinds library on WC under Odds 'n' Ends.

Re: Survey: Biggest challenges to getting "better"?

#42

Dick Hines

Re: Survey: Biggest challenges to getting "better"

Dick Hines

>My 40 hour a week job.

Re: Survey: Biggest challenges to getting "better"?

#43

Re: Thanks for the boot, Carole. :o)

Allen Neighbors

>Ordered Bill's first DVD. Didn't get it in the mail until this morning... I was out of stamps. So now I'm just waitin' on the USPS. :o)

Re: Survey: Biggest challenges to getting "better"?

#44

Re: Survey: Biggest challenges to getting "better"

David Breth

>Not sure how active this thread is anymore, but here goes...

1) Time. Not exactly a stunning revelation.

2) Wood. I've got tons of wood, much of it green. Others posted on that topic.

3) Hands on with someone who knows. I've been doing this just long enough to have developed some bad habits, but could use someone with smarts hovering hover me for a session. In fact, maybe I can talk somebody from my turning club into coming to my house for an evening.....

4) Sharpening. I'm terrible at it, and haven't the funds to commit to a sharpening "system". Again, I could use somebody hovering over me in the shop for a session.

David B.

Re: Survey: Biggest challenges to getting "better"?

#45

Re: Survey: Biggest challenges to getting "better"

Ed Karch

>In order to get more turning time I had to get a day job to support my addiction. Hot to turn more and work at the same time? Make your day job a night job then turn all day. I don't need no stinkin sleep.

Just got back from an Ellsworth's weekender and am still hyped.

Re: Survey: Biggest challenges to getting "better"?

#46

Re: Good drive by gloat, Ed. :o)

Allen Neighbors

>