We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>This piece is from a round blank that was covered in flat brown latex paint. Someone traded it to me for a piece of Mesquite? when we were at the Gathering at TD's in GA. I can't remember what kind of wood it is, and didn't write it down... (my bad)
The collar is Indian Rosewood. Finish is lacquer wash and Carnauba buff.
Sure wish I knew what kind of wood it is. Anyone got an idea?
>Thanks, Gil. I don't think it's Sycamore... it's too hard. This thing gave me more trouble hollowing, than any I've ever done. Almost as hard as Pecancrete. :o)
>Bart had me going for a minute... but I've turned a lot of black locust, and it didn't have the greenish/blackish tint to it. But it was about as hard as dry Black Locust, and it has the classic grain pattern of the Locust, but it wasn't the right color as any I had seen before.
Leo, when I read your post title, "... Honey Locust..." I said, "That's it!".
Now, I can lable the bottom. But, I still don't know who I got it from. I'd sure like to turn some more of it... GREEN.. :o)
Thanks for the compliments, Leo, and for posting the pics.
The opening began at 1/2", but I broke it out twice, so it ended up at 1-7/8". That called for a collar. I did put it on the tumbler for about 3 hours each direction... but decided on the collar anyway, because the curve just "fell off into the hole", and that reminded me of a critique I got the other day. The collar did make it look better.
>Actually, from posts somewhere and an identical wood I had, it is a moraine locust which I believe is a naturally occuring hybrid of the honey locust. I grew up in Missery, and there was a lot of the wild honey locust which had thorns up to 12 inches long, and never got really big. The Moraine locust can get up to 3 ft diameter that I have seen. Very hard, and very beautiful.
>It looks like red elm to me. Look at the W shaped figuring. Some call it feather. You only get that in elm and hackberry because of the configuration of the pores in the earlywood. If you look at Leo's honey locust, you don't see that at all.
If you need more evidence, I'll try to find a picture of a red elm vessel that somebody sent me after I sold them a piece. It may take a couple of days, though.
>This is a different variety of elm, but it should show the distinctive grain pattern that you only get with elm. Slippery elm is the same color as the piece you showed.