Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

spring pole lathe

Posts

spring pole lathe

#1

spring pole lathe

john lucas

>Well I'm finally home and unpacked. 3 days of turning with a spring pole lathe. Of course it's modified from the treadle lathe I started that broke. People really seemed to enjoy it. I even met one guy who tried to make a living using a spring pole lathe. He didn't survive very long.

We had a lady making grass baskets, a potter and guy building furniture with handmade joints. The 4 of us had a good time getting to know each other and entertaining the crowds.

Here's a photo of me at the spring pole lathe. I couldn't use a spring pole because we weren't allowed to put any spikes in the ground so I used bungee cords. They work but of course aren't traditional.


img

Re: spring pole lathe

#2

projects I made

john lucas

>Here are some of the things I turned. Some tool handles, chair legs, letter openers and spoon and spatula. I didn't bring any carving tools and it's hard to carve a spoon and spatula with nothing but a drawknife. Same was true with the letter openers. It did show people how it would be done. I also turned several blanks away until they broke just to be turning while people came in.


img

Re: spring pole lathe

#3

Welcome back to the 21st century!

Mike from St. Clair Shores

>

Re: spring pole lathe

#4

Leo Van Der Loo

Re: spring pole lathe

Leo Van Der Loo

>Thanks for the picture John, looks like you where having fun, that helps when doing a task that asks for dexterity and energy on your part. To bad you weren't able to use the treadle lathe as you had planned, I'm sure people got a kick out of this setup though. Still I think that I will stay with alternate energy sources, like electricity, done a lot of biking growing up in Holland, but those muscles have long since left, pedal power only a bit for fun around the neighborhood, I would not last long trying to power a lathe I'm sure.

Have fun and take care

Leo Van Der Loo

Re: spring pole lathe

#5

Re: Welcome back to the 21st century!

john lucas

>I'd love to stay in the past. A lot less pressure. Gotta get my butt moving and back to work this morning. Bummer.

Re: spring pole lathe

#6

Re: spring pole lathe

Jake Niedling

>The traditional period clothes you were wearing look similar to today fashion.

Re: spring pole lathe

#7

Alter Ego *LINK*

Jorge Castaneda

>John,

Good going, check here for a picture of your alter ego in Spain, his name is Restituto, look over his head and see the alternative to the springpole, they called a "ballesta". for me ballesta is a cross bow...


http://http://www.foromaderatorneada.com/viewtopic.php?t=447

Re: spring pole lathe

#8

Alter Ego *LINK*

Jorge Castaneda

>John,

Good going, check here for a picture of your alter ego in Spain, his name is Restituto, look over his head and see the alternative to the springpole, they called a "ballesta". for me ballesta is a cross bow...


Resti

Re: spring pole lathe

#9

JL

Re: Alter Ego - fixed link  *LINK*

JL

>


http://www.foromaderatorneada.com/viewtopic.php?t=447

Re: spring pole lathe

#10

Please delete this

Jorge Castaneda

>

Re: spring pole lathe

#11

Thanks JL!

Jorge Castaneda

>

Re: spring pole lathe

#12

Re: projects I made

Gerry Meekins

>John,

Cool.. Looks like a lot of fun! So do you have a "Popeye" Leg now. Looks like a lot of exercise for one leg..

Gerry

Re: spring pole lathe

#13

Dexterity required for spring pole lathe

Dinyar Chavda

>Looks to me that in order to be able to use this lathe you have to pass the test of being able to move your right hand clockwise over your stomach, and your left hand anti-clockwise over your head. Which means that I could not do this! Too bad---I keep trying to convince my doctor that I get my daily exercise working on the lathe!

Re: spring pole lathe

#14

Re: Alter Ego - fixed link

John Lucas

>Cool Photos. Don Weber was here demonstrating his spring pole lathe last year and he had a bow. I thought about doing that but I was jury rigging the spring pole adaptation at 9pm the night before I had to use the thing so the bungee's won out.

Re: spring pole lathe

#15

I saw a bow used on..

Stuart Johnson

>some t.v. show. I'm not sure which one but if I remember right they used several strings threaded through a hub. The hub was then wound up then the strings were attached the other end. The bow gave the spring and the hub some how or other gave a longer spin.

Sorry I can't give any more details but my mind is sort of like Readers Digest. Just enough bits and pieces of mixed information to confuse the issue.

Re: spring pole lathe

#16

Darrell in Oakville

Re: spring pole lathe

Darrell in Oakville

>John,

When I have to use my pole lathe where I can't use a pole (like indoors or anywhere else I can't drive a stake in the ground) I use a twin-bow recoil. This came from plans on the Bodger's website (see http://www.bodgers.org.uk under plans).

I had the lathe set up at my son's Scout camp a couple weeks back. I was using a 20 foot hop-hornbeam pole. It was a re-enactment of the War of 1812, so my pole lathe was perfect for the period. I turned for about 4 hours to a continual streams of spectators. They were all amazed that such a simple thing worked so well.

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User


img

Re: spring pole lathe

#17

Nice looking lathe.

John Lucas

>

Re: spring pole lathe

#18

Questions

Jorge Castaneda

>Hi Darrel,

Nice work, Do you have another picture showing the overhead works?

I don't quite grasp how the system works, do you get continuos rotation or still is alternating?

Thanks

Jorge

Re: spring pole lathe

#19

Darrell in Oakville

Re: partial answers

Darrell in Oakville

>Jorge,

I don't have any more pix of my lathe, but the Bodger's website has a gallery with some images... Mind you, the one shown there is a Mark II version, much more complex than the one I built.

http://www.bodgers.org.uk/gallery/main.php?g2_itemId=1814

And yes, it is a reciprocating lathe. The drive rope unwinds from the spool, spinning the work. As this happens, the spool twists the ropes that secure it to the ends of the bows. This draws the bows together, which provides the 'spring' to rewind the drive rope. A pole lathe takes a bit of practice to work with, as there are more things going on at once than with a power or treadle lathe.

I've had to satisfy myself with "rustic" turnings so far, because that seems to be all I can get out of it!

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User

Re: spring pole lathe

#20

Neat, Thanks Darrel!

Jorge Castaneda

>

Re: spring pole lathe

#21

Re: spring pole lathe

Jim

>I was just wondering how the treadle lathe came out, and found this thread about the Pole/Bungee lathe. I still wonder what happened on the treadle lathe...

If you get it going, I'd like to see what you come up with...

Re: spring pole lathe

#22

Re: spring pole lathe

john lucas

>Jim The treadle lathe is on hold. I turned it into a spring pole lathe to get me throught the weekend demo. Now I've got to get ready for the next round of demo's (on powered lathes). I'll probably work on it this winter. I usually do a foot powered lathe at the spring Craft Center celebration.