Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Brazillian Pepper Tree HF

Posts

Brazillian Pepper Tree HF

#1

Brazillian Pepper Tree HF

Allen Neighbors

>This is from the backyard of a friend, sent to me from Chula Vista, CA. It's 4" dia X 2 3/4 tall, with 3/4" opening... about 3/16" thick, except at opening. I have trouble making it as thin throughout, as it is at the opening.

Lacquer washed, Woll-Wax rubdown, Carnauba buff.

Please critique. Help me get a better eye.

Thanks.


img

Re: Brazillian Pepper Tree HF

#2

Re: Brazillian Pepper Tree HF 

Allen Neighbors

>


img

Re: Brazillian Pepper Tree HF

#3

Re: Brazillian Pepper Tree HF 

Allen Neighbors

>


img

Re: Brazillian Pepper Tree HF

#4

Re: Brazillian Pepper Tree HF

David

>Allen: This is a pleasing shape. IMO, the form could be improved if the curve on the lower part continued to a base of the same diameter you have here, which would have resulted in a piece that was a little more squat and shorter. Sometimes it helps to have a photo printed and posted behind your lathe to help your mind's eye with the form you wish to end up with or emulate. I have a photo of one of Bill Luce's bowls near my lathe, which fits in with some of the traditional Hawaiian clalabash shapes. Any one of Carole's minaiture hollow forms would work, and any of Wally's pieces, of course.

Re: Brazillian Pepper Tree HF

#5

Re: Brazillian Pepper Tree HF

Mike Nelson

>Allen, the form is great till you get to the bottom third or so. If you had continued the curve you would have run out of wood or had a very small base. I have had that problem too, now I make sure to have plenty of base to work with when I begin the final shape. Other than that, nice wood, nice bowl, nice finish. Mike

Re: Brazillian Pepper Tree HF

#6

Re: Brazillian Pepper Tree HF

Allen Neighbors

>David, thanks for the response. This is what I'm looking for... something to help me improve 'seeing'. I appreciate it. :o)

Re: Brazillian Pepper Tree HF

#7

Re: Brazillian Pepper Tree HF

Allen Neighbors

>Thanks, Mike. :o) That follows along with what David told me. If I had continued the curvature and made a bottom on it the size it is now, the form would have been better, and it would have been just a little bit shorter.

Now, if I can just put that knowledge into action...

Re: Brazillian Pepper Tree HF

#8

Leo Van Der Loo

Re: Brazillian Pepper Tree HF

Leo Van Der Loo

>Hi Allen, good job on the hollow form, nice finish also.

Of course that's never enough for us , right.

So my 2 cents, looking at, it it seems a little plain, and just a little tall maybe, like if you could take an inch off the bottom end it would not be missed and just a little lip around the opening would give the top a focal point, a point of interest. still I think you did a fine job and thanks for posting.

Have fun and take care

Leo Van Der Loo

Re: Brazillian Pepper Tree HF

#9

Re: Brazillian Pepper Tree HF

Allen Neighbors

>Very good... makes sense to me.. Shorter, with more lip... sounds like a Sergeant I used to have. :o)

I got it, Leo, thanks for the critique, that's what I wanted.

Allen

Re: Brazillian Pepper Tree HF

#10

Andy DiPietro

Re: Brazillian Pepper Tree HF

Andy DiPietro

>I like it just the way is. Nice Job. Is that wood an exotic wood, high density or is it a domestic wood in Brazil?