We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
#6 would be my choice if the top teardrop and lower gizmo were smaller, and if it was a little shorter. The center piece echoing the shape of the HF is neat. :o)
Here's my humble opinions. #1-is the best but is too tall. #2-Too many beads and coves, and they should get progressively smaller. #3-no rhyme or reason #4 Way too clunky #5-This would be nice if you thinned it down by 50% and make it get smaller towards the top. #6 way too top heavy. They are all good practice and I think you will soon be knocking them out
#1 does have a slight taper, 3/32" to a little less than 1/16". I guess you really have to look close to notice it though, even if you are holding it in your hand.
4) I agree that this is a bit "clunky" but of all the _shapes_ I like it best. It's simple. If it were just a tad taller, the base a little wider and the top a little smaller, I think it would be a winner. In other words it needs that taper that the above poster mentioned.
5) I like this one because it has a nice transition between all the elements. If it had just a little more taper I think it'd be perfect.
6) Ok.. I think this one is a bit "Dr. Suess-y" Or maybe something out of Alice and Wonderland? Or a formal garden topiary? It's a bit on the whimsical side.
Just my opinions of course...
I think that when we make finials we should pay attention to the "direction" it generates. If we think about this, then our finials would flow better. Not that I've made any finials mind you.. but I'll be trying to make one on Monday, and I'll probably post a similar thread....
If you're presenting this or showing it to woodturners or at a woodturning show, do #1. It's thin and long, a woodturners challenge.
If you're planning on selling it or giving it as a gift, do #5. It looks like it won't break super easy (I'd make it a bit thinner, maybe 25% off), it conforms with the size of the form on the bottom.
1. This one is best, main problem is the stem is too straight, would benefit from a taper from the beads to the tip.
2. and 3. Too busy, so many different details and shapes are confusing. No sense of unity.
4.Nice, simpler shape, but overpowers the form...too massive.
5. Good, tapers up toward the tip, but details need to be better proportioned (smaller) toward the tip, focus should be on the tip.
6.Top heavy, too many details at the top of the finial.
You've got some good bead shapes, and some good overall ideas here. It's just a matter of refinement. Coves separating the shapes will greatly add to your "repetoire". Definitely on the right track!