Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Need help with portable tool caddy

Posts

Need help with portable tool caddy

#1

Need help with portable tool caddy

Chris K in MD

>Hello everyone,

I was looking for ideas for storage of gouges and other lathe tools in a "caddy" to be used when doing demos or going to classes at another place.

The most prevelant I have seen for "local" travel is the 5 gallon bucket method. I have seen several pictures of these in the past with pvc pipe segregating the tools. I have seen them inside the bucket and outside the bucket. I think it should be very user friendly so that it could be used when you arrive at the site (IE not resting on the floor).

The bucket method would not work as well for travel by plane but I could see the possibility of adding a cap to the bucket. Tool rolls work but you dont always have the area to spread them out at the site you go to.

So what do you all use, what do you like or dislike about the way you went. Do you have a picture to share?

I appreaciate all your comments

Regards,

Chris

Re: Need help with portable tool caddy

#2

Re: Need help with portable tool caddy

Hooligan

>I don't have a picture, but the way I go round with my tools is quite simple. I got an 18Volt cordless set that came in a bag, a big duffle bag, with a zipper, and some compartments. I had a friend that is a seamstress make me tool rolls of heavy canvas, and in they go. Its large enough that my big scrapers fit well, as do any of the longer tools.

The only thing I wish it had, was a little harder bottom. would make it easier to get everything situated.

Re: Need help with portable tool caddy

#3

Re: Need help with portable tool caddy

Jennifer@Indy.USA

>Dave Peebles uses a foam filled shotgun case. It locks so that would be good for air travel. When I saw his I thought it was a great idea. You can also pack stuff like spur drives and things like that in it too.

Jen :)

Re: Need help with portable tool caddy

#4

Re: Need help with portable tool caddy

Chris K in MD

>Thanks Jen and Hooligan,

Those are both good ideas (My dad has my hard sided gun case) that is a great Idea for flying.

I am really looking for somehting that caries the tools but also is a compact way to keep the tools during the demo/class.

Thanks, please keep the input coming!

Re: Need help with portable tool caddy

#5

Re: Need help with portable tool caddy

Mike Nelson

>How about a wood suitcase with metal corners or angle metal around edges? Make it a couple ft. long 16" wide and 5" deep (depending on tool size). Line it with foam and use velcro or snap-in slats to hold the tools to the top and bottom. Should hold a dozen tools and extras if you alternate the handles to either end. :)

Re: Need help with portable tool caddy

#7

Re: Need help with portable tool caddy

Mike from St. Clair Shores

>Leo,

Great link. I think this is the best one I have seen. I know now why you're so productive, you don't sleep. This post you sent was really in the wee hours.

Take care,

Mike

Re: Need help with portable tool caddy

#8

Re: Need help with portable tool caddy

Phil Powell

>There's an excellent one in the Packard Woodworking catalog. It's a tool roll. I used one of them for three years.

Re: Need help with portable tool caddy

#9

Re: Need help with portable tool caddy

Chris K in MD

>That is very close to what I had in mind! thank you very much.

Does anyone else have some good ideas?

Re: Need help with portable tool caddy

#10

Re: Need help with portable tool caddy

Walter Ahlgrim

>Not much fun to pack on a plane but could be done sure are nice to work with.

Walt A


img

Re: Need help with portable tool caddy

#11

Re: Need help with portable tool caddy

Bob Fawcett

>You would probably want something that stores the tools with edges concealed or protected, especially when set up for a demo.

Re: Need help with portable tool caddy

#12

Re: Need help with portable tool caddy *LINK*

Rick Allen

>Some of the folks in the woodturning club I belong to use these.


img

22 in. Standard Truck Box

Re: Need help with portable tool caddy

#13

Soon to be in Indy :)

Dave Peebles Lyons, Ohio!

>Just a couple of weeks away Jen, "Have tools.. will travel"

See ya soon!!

Dave