Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Norfolk Island Pine bowl PICS

Posts

Norfolk Island Pine bowl PICS

#1

Norfolk Island Pine bowl PICS

Mike Rubes, Apex, NC

>Hi all,

I got this chunk of NIP from David Chung back a few months ago, but was involved in a cabinet project so let it sit for a while. I sort of wish now I had turned it sooner as it really spalted in the time since I got it. I think it turned out ok, but would have been better with more of the cream color.

Bowl is about 8 inches across and 6 high. I turned it pretty thin. It is about 1/16 to 1/8 in most places with the foot itself being about 1/4. Finish was a 2 day soak in danish oil and then back onto the lathe for sanding. Final finish is a buffing on the Beall system. Even with the extra spalting, I really like this one. My better half must like it as well as she claimed it as soon as it came off the lathe! That's only happened with about 3 or 4 others, so this one must be ok :)

Even with so much spalting, it is amazingly translucent, so much to the point that even just sitting on the shelf with lights above it, it almost "glows" in the cream colored areas.







Comments and critiques are always welcome.

Thanks for taking a look,

Mike

Spinning and spinning in Apex, NC

Re: Norfolk Island Pine bowl PICS

#2

Re: Norfolk Island Pine bowl PICS

bob davis

>beautiful

Re: Norfolk Island Pine bowl PICS

#3

Outstanding!!

GaryG in MD

>Mike,

This is simply one of the most beautiful bowls I have seen on this site for some time -- and that's saying something.

You really nailed it -- and I LOVE the spalting. It gives it a very special character.

Bravo, Gary

Re: Norfolk Island Pine bowl PICS

#4

Great job, Mike

david

>When there is a lot of spalting, the knots will really stand out as the most translucent areas.

Re: Norfolk Island Pine bowl PICS

#5

Leo Van Der Loo

Like this better'n no spalting, very nice job Mike

Leo Van Der Loo

>

Re: Norfolk Island Pine bowl PICS

#6

Re: Norfolk Island Pine bowl PICS

Jorge Castaneda

>Hi Mike,

Nice work, I admire your courage and finesse to go that thing, maybe some day i will follow you.

Thanks for sharing

Jorge

Re: Norfolk Island Pine bowl PICS

#7

Thanks, all!

Mike Rubes, Apex, NC

>Hi all,

Thank you for the very kind words, it is appreciated. I had a lot of fun with this bowl. Jorge, don't be timid, go thin! The NIP seems to take thin very well, maybe it's the end grain orientation?

Thanks again,

Mike

Two more off the lathe today, maybe pictures tomorrow in Apex, NC

Re: Norfolk Island Pine bowl PICS

#8

Re: Thanks, all!

Jorge Castaneda

>Mike,

I've tried, so far have not succed. I'll keep trying.

Thanks for the encouragment.

Jorge