Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Frank E. Cummings III

Posts

Frank E. Cummings III

#1

Frank E. Cummings III

Steve S.

>Why has this Artist not had any recent shows or why don't we hear about him or his

work lately. I know he has a website. It does not seem that he has any new work.

Is he considered a "Master Woodturner" anybody have any thoughts?

Thanks!

Steve S.

Re: Frank E. Cummings III

#2

Re: Frank E. Cummings III

Allen Neighbors

>I've only been turning two and a half years, and I've never heard of him. I'll do a search, and see if I can find him.

Allen

Re: Frank E. Cummings III

#3

Re: Found him. *LINK*

Allen Neighbors

>This site should be the one to give you the answers to most of your questions.

Allen


Frank E. Cummings III

Re: Frank E. Cummings III

#4

Re: Found him.

tm

>cool looking pieces Al

tm

Re: Frank E. Cummings III

#5

Re: Frank E. Cummings III

Mike from St. Clair Shores

>Craft Supplies sells a video set called "Beyond Wood", there are 6 artist and Frank is one of them. I think you can buy the whole set or each artist on a separate DVD. I've watched them all and they were very informative.

MIke

Re: Frank E. Cummings III

#6

Richard Allen

Re: Frank E. Cummings III

Richard Allen

>Frank E. Cummings III has done many things in his life. He has some interesting thoughts about marketing. Basically his idea was to make a few exquisite items and charge extremely high prices for those pieces. Part of his plan was to limit the number of pieces he made.

There is an interesting story about Frank E. Cummings III. He decided he would like to make a clock. He designed and built his clock and entered the clock into the national competition for clock builders. As is usual of Frank E. Cummings III the clock was wonderfully made and of a design that was unique to this clock. When the competition is narrowed down to the top few the makers are interviewed by the judges.

When Frank E. Cummings III was interviewed there were a lot of questions about his design. Then one of the judges declared that his clock was inaccurate and that his clock would have ranked higher if it had been more accurate. The clock was 7 second fast over a week. Frank E. Cummings III quickly defended that the clock was accurate. When asked to explain the 7 second a week discrepancy he explained that of course the clock was 7 second fast because that is how long it took him to wind the clock! Frank E. Cummings III won that clock competition and has not made another clock since.

Please note that this is a second hand or third hand story so if the facts are disputed then I would defer to those with better knowledge.

Re: Frank E. Cummings III

#7

Re: Frank E. Cummings III

Ken Grunke from SW WI

><Is he considered a "Master Woodturner" anybody have any thoughts?

Does he ever vary his form? All the pieces shown on the link from Allen look the same to me. Does he turn the vessels himself, or have them cranked out by an apprentice?

I, for one, am not impressed with his work--his "turnings" don't do anything for me.

Re: Frank E. Cummings III

#8

Though the music is an acquired taste.

Craig Daymon

>I have the set, basically because I'm a big fan of Hans Weissflog and he's one of the featured turners, but I can't say I care much for the music. Especially since it is played way too loud relative to the the volumne of the conversations on several of the interviews. Also, a little too much time spend how nice the country is where the turner lives. I didn't buy the disks as a travel guide.

Anyway, still some interesting stuff on there.

-Craig

Re: Frank E. Cummings III

#9

Ken *LINK*

Dave Peebles Lyons, Ohio!

>Check out this link to his web site. I think it is ok to not like his work. Everyone has different tastes, but to say he doesn't do his own work is a bold and unproven statement. If you are going to accuse him of that, I would like to see the evidence. He is considered by many to be a pioneer in the woodturning field. Myself included.

Best wishes,

Dave


http://www.frankecummingsdesign.com/

Re: Frank E. Cummings III

#10

Re: Ken

Ken Grunke from SW WI

>Dave,

Please read my post again. I did not state a fact, or make an accusation. I asked the question whether or not he turns the base forms for the work he does, and did NOT accuse Mr. Cummings of having someone else do his work.

I did a little google-ing and found this webpage with a picture of Frank at the lathe, and also stating that he works alone without apprentices. That's enough to satisfy me.

I took a good look at his site from your link, and the opening slide show had a carved chair which really caught my eye. I'd love to see more of that kind of work but the turned, carved, & decorative vessels all seem a bit repetitive to me. My insinuation that Cummings subcontracts out certain processes of his work, as many well-established artists do, could have been left unspoken and I will bite my tongue next time I feel like saying something negative here or anywhere for that matter.

Peace,

Ken Grunke

Re: Frank E. Cummings III

#11

Re: Ken

Dave Peebles Lyons, Ohio!

>Hi Ken,

I just re-read my message to you, and it did come off a little harsh. I didn't really mean it that way. I hope there are no hard feelings. I am a big fan of yours, you have posted a ton of good info here and elsewhere.

Peace to you too,

Dave

Re: Frank E. Cummings III

#12

No reason for hard feelings, but...

Ken Grunke from SW WI

>Gee Dave, that really blows me away--I've never had a fan before. I'm just a laid-back country boy--consider me a fan of yours, as well. I've admired your turnings for a long time and also very much appreciate the work you put into the symposium pictures on your website. Thanks :))