Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Sanding Discs Abrassives/INdyfest

Posts

Sanding Discs Abrassives/INdyfest

#1

Sanding Discs Abrassives/INdyfest

Jennifer@Indy.USA

>Hey everybody,

Just wanted to let you all know about some new sanding discs that I've been using lately and have come to just love how well they work. In my class this summer one of the other students was using some blue sanding discs on a pneumatic random orbital sander and he was letting everyone else borrow his stuff. As a rule I usually just hand sand. I'm not big on power sanding at all. I�ve tried it�..spent all the money on the pads that heat up and fall apart and all that good stuff�.but over the course of the week I kept noticing that everybody's finishes were incredibly nice and smooth as a baby's butt and so I asked Charles if I too could borrow his random orbital sander and try his discs. Wow....I was sold. This stuff is called is blue flex micron film. The finish is amazing and I honestly am not sure how much the random orbital sander had to do with it�but when I use a piece of the discs for cleaning up a spot�.it still works fabulously. Jump a month ahead to the AAW symposium, and there are these Blue discs. Everybody is buying them like hotcakes! I decide to take the dive into power sanding again and I bought a bunch of these things in three different sizes�.I also geared up with a new random orbital sander like Charles had at the class and some nice hook and loop pads to hold the discs. I haven�t looked back. These discs cut fast, and don�t clog very fast and they seem to last much longer than any other discs I�ve used. The clincher is�.they are cheaper than most other discs. I purchased these from Vince�s WoodNWonders booth at the symposium. While there I found out that he was located in Jeffersonville, IN. So I�ve asked Vince if he�d like to come to the INdyfest in October and peddle his wares and as of today he is planning on being there! So that will be a neat deal for anybody wanting to try these out. Another reminder too that there will be other vendors there as well. Woodcraft is going to be there along with a Sorby rep, I�m trying to get Woodturningz there with all of their pen making stuff�especially their pen blanks. Doug Thompson has been making some bowl gouges that he is going to have for sale. Anybody who has something that they make that is related to turning and would like to have a place to sell it contact me or Terry Quirram and we�ll get you a table that weekend!

I�m not affiliated with Vince at all�..I�m just wanting to pass along this really great product.

Jennifer


img

Re: Sanding Discs Abrassives/INdyfest

#2

Re: Sanding Discs Abrassives/INdyfest

Jim Shaver Oakville, Ont.

>Hi Jen,

I remember when you bought this in Louisville, you had a feeling it would be a good decision. I am really pleased it was!! That is a healthy stash of discs!

Great news on the vendors section at Ray's too, fine work!!

Take care,

Jim

Re: Sanding Discs Abrassives/INdyfest

#3

Re: Sanding Discs Abrassives/INdyfest

Mike from St. Clair Shores

>Jennifer,

I bought the same random orbit sander and the blue discs( only not as many as you) in Louisville also and I love it. I've said it more than once that it was my best purchase there.

Mike

Re: Sanding Discs Abrassives/INdyfest

#4

Re: Sanding Discs Abrassives/INdyfest

robo hippy

>How do I get in touch with Vince?

robo hippy

Re: Sanding Discs Abrassives/INdyfest

#5

Re: Sanding Discs Abrassives/INdyfest

Bill Neddow

>Jennifer, I agree with you. Vince's sandpaper, and the Astra Dot sold by Woodchuckers, are the two best papers I have found. And I have been doing a lot of sandpaper testing over the past year because I have been developing some new sanding techniques. These will even stand up to high speed sanding (6,000 to 8,000 rpm) -- which really says something for how they are made. They are even superb for hand sanding. Also, Vince's sanding pads are the best on the market -- bar none. Not affiliated with Vince -- he has no idea who I am. I have just spent a bundle of money testing sandpaper and these are the results.

Re: Sanding Discs Abrassives/INdyfest

#6

Re: Sanding Discs Abrassives/INdyfest

Nick Tuzzolino

>www.vinceswoodnwonders.com

Re: Sanding Discs Abrassives/INdyfest

#7

Re: Sanding Discs Abrassives/INdyfest

keith zimmerman, Normal IL

>I have been thinking about changing disks. I've had nothing but problems with the 2" disks I have been using, usually the paper coming off the backing. I saw these at Louisville, but passed on buying any because I had already spent twice what I wanted to.

Can't wait to get some of these and try them.

keithz

Re: Sanding Discs Abrassives/INdyfest

#8

Re: Sanding Discs Abrassives/INdyfest

Jennifer@Indy.USA

>Keith, one of the things I like about these is that they are cut a bit over sized...and the pad is beveled so that the disc actually folds over the pad a bit...and works like those fancy flower shaped discs that are WAY over priced.

Jen

Re: Sanding Discs Abrassives/INdyfest

#9

Re: Sanding Discs Abrassives/INdyfest

Doug Thompson near Cleveland

>The Grex ROS is wonderful to use, with the speed turned down it runs very well on a 25 gal. compressor.

This past Febuary I made a batch of bowl gouges from 10V that has been used by me and others with very good results. Tuesday another batch of tools will be sent to be heat treated. At Indy I would like to let everyone try the different tools, use your own gind then use (abuse) and tell me what you think good or bad. I'll bring some extra 3/8 and 1/2 gouges if you need them.

If you have any ideas for a flute shape made from 10V contact me.

Metalworking is fun but nothing will ever beat woodworking.

Re: Sanding Discs Abrassives/INdyfest

#10

Re: Sanding Discs Abrassives/INdyfest

robo hippy

>I tried to get through to his web site but got a 'web site is unavailable due to exceeding monthly quota, try again later'. Any other ways to contact him????

robo hippy

Re: Sanding Discs Abrassives/INdyfest

#11

Re: Sanding Discs Abrassives/INdyfest

Clay Foster

>Bill,

I hope someday you'll publish your research on sand paper and sanding techniques. When it comes to bowl turning, I think you kow what you are talking about. I've seen a lot of turned bowls, and I think yours are the best.

Re: Sanding Discs Abrassives/INdyfest

#12

Re: Sanding Discs Abrassives/INdyfest

Bruce Wiseman

>I knew I had his Business card, I just had to tear the place apart to find it!

His email: WoodNWonders@Excite.com

His phone: 812-284-4661

Hope it helps. Usual disclaimers,- do know the guy, just a satisfied customer.

Re: Sanding Discs Abrassives/INdyfest

#13

Re: Sanding Discs Abrassives/INdyfest *LINK*

Vincent Welch

>Hi Gang,

This is Vince and I appreciate all the great comments! Thank you! I need to apologize about my site being down. The Oneway folks invited up to Canada to tour their operation and I made the most of it by take over 75 PICs. When I got back I made a MS Power Point presentation for people to enjoy. I mentioned it to a few people and in 3 weeks I had over a thousand hits on the website and many people downloaded the presentation which is 5MG in size. Because of the excessive traffic I had to upgrade my web hosting agreement. That is why the site was down for a few hours (not even a day). I am looking forward to the INDI FEST and meeting some great people. Hope to see you there. Vince

www.vinceswoodnwonders.com

812-284-4661


http://www.Vinceswoodnwonders.com

Re: Sanding Discs Abrassives/INdyfest

#14

Re: I was one of them. Thanks for the

Allen Neighbors

>Power Point Presentation of the Oneway Manufaturing plant. :o)

Didn't know I was clogging the e-lines with my slow dial-up. :o)

Allen