Ceramic Pepper Mill Mechanisms
Dennis in Southern Oregon
>Who sells these?
Knowledge You Can Build On — Est. 1998
Ceramic Pepper Mill Mechanisms
Dennis in Southern Oregon
>Who sells these?
Re: Ceramic Pepper Mill Mechanisms
Allen Neighbors
>Woodturner's Catalog... Craft Supplies USA.
Allen
Re: Ceramic Pepper Mill Mechanisms
Dennis in Southern Oregon
>Thanks Allen. Funny, I looked in both of these catalogs and only found stainless steel units. I will look more carefully. Dennis
Re: Ceramic Pepper Mill Mechanisms
Mike from St. Clair Shores
>This is some info I found last month when I went looking. The guy who imports them from some scandinavian country( Finland, I think ) is a turner named Brian Howerton. His company is called "All Things Pepper". www.allthingspepper.com . The phone is (480)824-888. If you buy 100 the large one is $12.70 and the small $10.40.
Mike
Re: Ceramic Pepper Mill Mechanisms *LINK*
Curt Fuller
>
Crushgrind
Re: Ceramic Pepper Mill Mechanisms
Allen Neighbors
>Dennis, I may have led you astray. Having never turned one, and not planning on it yet, the ones I saw in the catalog may not have been ceramic. Here's the one from Penn State Industries mentioned in the link, above:
CrushGrind� 10" Shaft mechanism
Code:PKCRUSHS
Price: $14.99
Sorry for the confusion....
Allen
Re: Ceramic Pepper Mill Mechanisms
Barry Irby
>I have never turned a pepper mill, but I have a couple made by Olde Thompson. Some of theirs sell for less than the numbers mentioned above. Wonder if they would sell you the mechanisms without any "body"? If not, wonder if you could buy some of theirs and just throw away the part you don't need?
Re: Ceramic Pepper Mill Mechanisms
Mike from St. Clair Shores
>Allen,
You were right, the crush grind are ceramic.
Mike
Re: Ceramic Pepper Mill Mechanisms
Bill Kay
>Hi Barry,
I always poke around the stores while my wife "shops". In a store called Tuesday Morning I frequently find up_scale pepper and salt mills on sale. These have the Pugeot grinders. I use those parts to outfit the fancy ones I make for friends. When they are on sale I can get the mill MUCH less then the prices the suppliers charge for the kits or parts.
As a side bar. The length of the shaft determines the height of the pepper mills. The square stock can be found at almost any hardware store. If you can find a short mill on sale buy it and make a new drive shaft.
Most of the time I'll have a little over 5 bucks tied up in one. This supply line won't work for the production turners but will allow us weekend warriors to turn a few mills for friends and family.
Regards,