Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

PM 3520a Indexing Jig

Posts

PM 3520a Indexing Jig

#1

PM 3520a Indexing Jig

RP

>I've read and looked at a lot of these homemade indexing jigs turners have made. I've yet to make mine. I just wonder why someone doesen't just use a sprocket off of a bike for the jig. The size you use would determine the number of indexes. It seems like you could just use a slide bolt type of operation to lock it in place. Why don't one of you rocket scientist out there make one and then show me how!!

I have considered the safety aspect of it. You could just cut a tire inner tube and stretch it over the sprocket when it isn't in use. You only use the indexer very occasionaly.

Just brainstorming.

RP

Re: PM 3520a Indexing Jig

#3

Re: PM 3520a Indexing Jig *LINK*

John Lucas

>Bike sprockets and even saw blades have been mentioned. They work but I wouldn't want to leave it on the lathe while running. I bought one of the indexing wheels from these folks and it works great and is easy to install and remove and is save when the lathe is running.


http://www.ironfirellc.com

Re: PM 3520a Indexing Jig

#4

Re: PM 3520a Indexing Jig

John Lucas

>I forgot to mention that I have a much easier way of mounting the index block on the Powermatic. I'll try to post it tonight when I get home if I remember.

Re: PM 3520a Indexing Jig

#5

Re: PM 3520a Indexing Jig

Mike from St. Clair Shores

>I bought ten of these indexers for members of my turning club. They work great and at $19.95 each they are a good deal.

Mike