Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Help - Lead shot in gouge handle

Posts

Help - Lead shot in gouge handle

#1

Help - Lead shot in gouge handle

Gordon Seto

>It seems lead shots in gouge handle like the Glaser reduces gouge vibration. The center of gravity of a regular wooden handle Sorby bowl gouge is about 1/3 from the edge. Bowl gouges with Oneway or Kelton steel handles are about mid-point. The center of gravity of a Glaser gouge is about 2/3 from the tip. The lead shots move the weight to the back of the gouge without adding massive weight in the whole handle. I believe this back end weight helps the leverage to counter the downward force in the cutting action.

I want to add some lead shots to my gouges. I am not familiar with loading shotguns, and there are various material and numbers. What type and number should I use? How much weight should be added?

Thanks in advance.

Gordon

Re: Help - Lead shot in gouge handle

#2

Re: Help - Lead shot in gouge handle

Bill Turpin in WNC mountains

>I have a 25 lb bag of #8 shot that cost about $16 three years ago. Any gun shop should be able to fix you up. This is a life-time supply.

Bill in WNC mountains

Re: Help - Lead shot in gouge handle

#3

Re: Help - Lead shot in gouge handle

Mark Mandell - Gone Round In Jersey

>Gordon,

I made the lead "mistake" as well (minimum quantity is 25 pound bags). I use the shot in my handles, and it's great, but I'd rather not have to deal with lead. Didn't think to ask, but steel shot is now used and available and you don't have to worry about lead in your shop or disposal off the stuff down the road.

m

Re: Help - Lead shot in gouge handle

#4

Re: Help - Lead shot in gouge handle

Mike from St. Clair Shores

>Is lead shot what is needed? I was just thinking about the lead sinkers my local fishing tackle sells. They sell split shot, but I was thinking about the pencil type weights. They come in all diameters up to about 3/4 inch and the lengths from 1" up to about 7 or 8 inches. I'm going to get one today and put it in my oneway and secure it with the set screws. I really like the oneway now, but this got me thinking and who knows if more weight will make it even better.

Mike

Re: Help - Lead shot in gouge handle

#5

Is it the weight or the shot?

Clem Wixted, Jonesboro, AR

>One of the features of the hollow handles seems to be to also reduce vibration.

Is it the little pieces of shot that does the vibration reduction or the weight of the lead, or both. Is lead more vibration reducing than steel shot? Will the lead "rods" do the same job?

Wondering.

Clem

Re: Help - Lead shot in gouge handle

#6

Re: Help - Lead shot in gouge handle

Gordon Seto

>When I shake the Glaser gouge, it seems that whatever shots inside are small loose beads and encapsulated at the rear portion of the handle.

I don't think a massive heavy handle is what I want. Too heavy a tool would lose the sensitivity of control and make the arm tired. A well designed tool should get a balanced compromise.

Gordon

Re: Help - Lead shot in gouge handle

#7

Re: Help - Lead shot in gouge handle

Barry Turner

>From what I understand, there is an advantage to having the lead shot free to move about freely. This is where the vibration damping ability comes from, not just from the additional weight. I don't believe the size of the shot is all that critical as long as it is fairly small, say #7, #8 or #9 1/2 should do fine.

Barry

Re: Help - Lead shot in gouge handle

#8

Re: Help - Lead shot in gouge handle

Jose Klipstein

>Lead shot is what I prefer..... #4, #5, #6, #8. I don't think size really matters here. Available at Cabela's, Gander Mtn., or any shooting supply.

In the 5/8" end of my Oneway/Hosaluk handles I use a length of 1/2" copper pipe about 8" long, filled 3/4 full of the lead shot. In the 1/2" end I use a length of brass tube that has a 1/2" OD. I turned small wooden plugs to fit and glued them in with thick CA glue. Weights are held in place with with the unused set screws.

Re: Help - Lead shot in gouge handle

#9

Re: Help - Lead shot in gouge handle

Jorge Castaneda ~ Downeast Maine

>Hi Mark,

I think the steel shot does not dampen vibration and lead does, lead is a dead thing, steel is a vibrant one and once the lead is inside a handle it is most likely to be there for generations.

just a thought

Jorge

Re: Help - Lead shot in gouge handle

#10

Re: Help - Lead shot in gouge handle

Doug Thompson near Cleveland

>Gordon, you want to make a handle like the Sweazey www.sweazeytools.com I would turn a basic handle, bore it out and try different materials. Weight to volume lead/steel shot is the best but you could bore a larger diameter hole and use sand. Does it have to be loose fill? Solid steel round stock could work.

I make my own aluminum handles and tried both lead/sand with good results just different weights.

Let us know...