Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

really tiny goblets

Posts

really tiny goblets

#1

really tiny goblets

john lucas

>Well I'm getting there. The smallest is upside down in this photo and is 1/16" or smaller the biggest is 1/4". I don't know how I'll photograph them. I'll have to use tweezers very carefully to try and stand them up. For your information yellow heart is much smoother than ebony. Ebony and mesquite have very tiny sap pockets that are like huge fissures when viewed on this scale. Yellow heart turns well at this scale. I don't think I've reached it's limits yet. I'm going to try holly and see how it turns. One of the hardest parts so far is getting a good edge on my micro skew. So far all I've gotten is an overly round edge skew. I may have to rig up some kind of jig.


img

Re: really tiny goblets

#2

Steven Antonucci

You have issues, dude.

steve antonucci

>I'd like to have to clean your shop. Use a babywipe and be done.

you need to share your toolkit with us. I think it would be very cool to see how many angels can turn on the head of a pin :-)

Steve

Re: really tiny goblets

#3

I will take 1000's by Monday

Jake Niedling

>John - since these are so little, it should take you much time to crank out a 1000's for me. I would like them all exactly the same size. How about it? Can you do it, Huh, Can you do it? Well in that case, just forget my order.

Re: really tiny goblets

#4

OK, lets see some captive rings! :)

Carole Valentine

>Lets see your tools John. These are incredible...at least I would think so if I could see them!

Re: really tiny goblets

#5

I do take one drug now - for fun

Dave Belser

>- and, maybe you've heard of it, it's a new thing, I don't know if you have or not. It's a new thing, it makes you small. [ indicates size with fingers ] About this big. And, you know, I'll be home, sitting with my friends, and, uh.. we'll be sitting around, and somebody will say, "Heeeyyy.. let's get small!"

Hey John why aren't you sharing :)

I hope most in this group remember the Steve Martin skit.

- Dave

Re: really tiny goblets

#6

Re: really tiny goblets

Jim Shaver Oakville, Ont.

>Hi John,

Those are REALLY tiny.......I am impressed, I wonder what else you can make that small?

Take care,

Jim

Re: really tiny goblets

#7

Re: really tiny goblets

Mike from St. Clair Shores

>John,

Here's a new challenge for you. Try to make a mini like this one.


img

Re: really tiny goblets

#8

Now that's a challenge.

john lucas

>

Re: really tiny goblets

#9

Re: really tiny goblets

john lucas

>Jim Not that small but a doll house scale natural edge bowl is coming. Just have to find the wood and turn it.

Re: really tiny goblets

#10

Re: I will take 1000's by Monday

john lucas

>Jake 1000, let's see, that would be 1/2 cup of rice?

Re: really tiny goblets

#11

Re: OK, lets see some captive rings! :)

john lucas

>I'll try to post the tools and how I do this tomorrow. I'm going to do some captive ring but probably in the 1/4" scale. Have to make the captured ring release tool.

Re: really tiny goblets

#12

Leo Van Der Loo

Those are just amazing John, really neat YES !!

Leo Van Der Loo

>

Re: really tiny goblets

#13

Re: really tiny goblets

Ken Grunke from SW WI

>John, you really blow my mind.

You've opened up a whole new world for turners, which I find appealing.

Desktop turning! Some day, maybe in the near future, I may have to give up turning at the scale I work at because of intolerance to dust.

I imagine myself having a micro lathe, in a small enclosed box, with a built-in filtration unit and tools that can be inserted through little portholes. And a stereo microscope to see what I'm doing. Maybe I can just wear the whole thing strapped to my face like goggles, and turn out on the streets or on a park bench. The homeless turner, sitting next to the Bag Lady.

Re: really tiny goblets

#14

Re: really tiny goblets

Leppikallio

>I have some cutoffs from brown mallee (?) burl caps.... would be quite good for mini NE projects? Send me you mail address and I'll send you some of them?

Re: really tiny goblets

#15

Re: really tiny goblets

Dennis Daudelin

>John, if you like yellowheart for smooth turning, try bloodwood. It's really smooth, very hard and no grain/voids at all... might help at that mini scale!!

Dennis

Re: really tiny goblets

#16

JL

Re: Hey, let's all send John our scraps..

JL

>I can send you some chunks of bloodwood and jatoba. How big of a piece is reasonable.

Re: really tiny goblets

#17

possible followups...

Ed Kelle

>on the same scale of course

long stemmed goblets

shot glasses

bottle stoppers ( a collaboration with Ruth if she makes tiny threaded ones for you)

and more realisticly, a small wine glass holder

You are doing amazing work John!

Re: really tiny goblets

#18

John, turn a tiny martini glass.

Barry Irby

>I'll turn a tiny little olive for it and will send it to you as soon and I turn a pimento and toothpick for it. Wonder what size drill bit I will need to drill the hole for the toothpick? NOT!

Fantastic work.

Re: really tiny goblets

#19

Holly should work great for the minis.

Dave Smith, Longview, WA

>Do you want to order a life time supply of holly? I figured one pen blank should last a good while or until your eye sight is ruined. I should think pear would work well also.

Do you have a sign in your shop? Some thing like, Don't sneeze. Or, You inhale it you buy it.

Dave Smith

No Lilliputians to turn for in Longview, WA.

Re: really tiny goblets

#20

better photos

John Lucas

>The tall one is 3/16" the smallest is around 1/16". When I find out how small I can really go I will talk to our engineering department and see if they have a way to photograph them to show the real size with measurments. Electron microscope will be too much but they probably have a microscope with a scale in it.

I believe I can get better details and form on the small one. I was afraid I'd break the stem but yellow heart seems to be pretty strong so I'll try one with thinner stem and base and hopefully clean up the cup portion as well.


img

Re: really tiny goblets

#21

turning miniatures -setup

John Lucas

>I'm using a stereo microscope with jewelers screwdrivers to turn. I have a pin chuck mounted in my extended jaws vicmarc chuck and mounted on the powermatic (talk about overkill). The microscope is mounted on a jury rigged bracked using a bellows rail, a micro focusing rail and various bogen clamps and brackets to that fit on a wooden stand on the floor.

The tool rest is a 1/8" roll pin pressed into the end of my Powermatic 6" tool rest.

The face is ugly but man I could have been a hand model. :)


img

Re: really tiny goblets

#22

Steven Antonucci

Now I've seen it all...

steve antonucci

>You need to turn a mount for your camera to attach to the microscope... I want to see action shots!

Nanotechnology is the new rage in turning...

Steve

Re: really tiny goblets

#23

Re: turning miniatures -setup

Wilford Bickel

>The ultimate answer to the new turner question "Can you turn small things on a big lathe?". My old mind just went to the old limbo song of "how low can you go", only in this case it is "how small can you go"!

Re: really tiny goblets

#24

JL

Re: If they can't help you, send me a couple..

JL

>I've got a reasonable camera that I can use on either the stereo microscope or the Zeiss. As an example, the accompanying photo is a cross-section of one of the prop cups used for pudding snacks.


img

Re: really tiny goblets

#25

Re: One question John--Why???

Jamie Donaldson

>