Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Bottle Stoppers & display

Posts

Bottle Stoppers & display

#1

Bottle Stoppers & display

Mike from St. Clair Shores

>Had my first show recently and made this display for bottle stoppers. I use the stainless ones from Ruth Niles, they are the best. I usually leave one in the bottle, then most people can figure out what they are.

Mike


img

Re: Bottle Stoppers & display

#2

Great Display Mike!

Jennifer@Indy.USA

>....and nice stoppers too :)

Jen

Re: Bottle Stoppers & display

#3

Re: Great Display Mike!

Arch

>Very eye catching Mike, I did essentially the same as you except I turned a wood bottle and added a label and stopper to it. I think yours is more authenic and glass makes for a pleasing display.

Re: Bottle Stoppers & display

#4

Re: Bottle Stoppers & display

John Lucas

>Mike That's a good idea. I had trouble selling wine stoppers around here because nobody knew what they were. I turned 2 rings to fit around the bottle and glued them to the bottle at different levels. I gave it to my gallery for thier dispay. It holds 16 stoppers. My wine stoppers now sell really well.

Re: Bottle Stoppers & display

#5

Ric Taylor

There's No Sherry in the Bottle

Ric Taylor

>This calls for an investigation............

Ric

Re: Bottle Stoppers & display

#6

Re: There's No Sherry in the Bottle

Mike from St. Clair Shores

>Ric,

I used the last bit of that sherry in some beef stoganof I made. Besides I'm good friends with Jack Daniels.

Mike

Re: Bottle Stoppers & display

#7

Re: Bottle Stoppers & display

Mike from St. Clair Shores

>John,

I don't remember if it was your display I saw with the ring around the bottle, But that was what I first tried to do with the bottom of this display, I was going to have it around the bottles neck. But it was top heavy ( 2 rings would have blanced it out better) so I did one of those re-engineer things and came up with this. Thanks for the original idea.

Mike