Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Almost accident- always be careful

Posts

Almost accident- always be careful

#1

Almost accident- always be careful

john lucas

>Last night I was cutting another piece of dogwood for my demo today. It was a 3" limb section. I've cut hundreds of these things for ornament balls. I always use a V block that fits in my miter slot on the bandsaw. This keeps the log from rolling. Anyway I started the cut and before I could blink it through the log, about 8" long up and hit me in the right cheek. Left a very tender area and a nasty looking scrape about 2" long.

I did have safety glasses. I wasn't tired, I wasn't rushing, I absolutely don't know why that was any different than all the other pieces I cut. The only thing I can figure was I was using a 1/2" 3 tooth blade. I've cut many limb sections with this but it must have been the hardness of the dogwood (seasoned, not green) and the courseness of the blade. I still don't know how it managed to go up and back to hit me in the face. The first thing I did after I realized it happened was to look at my fingers. All there. I do my very best to keep my hands out of line with the blade and I guess that paid off.

My friend Pat Matranga came by the symposium today and as soon as she saw me she said A piece of wood got away from you didn't it. Darn she's so smart.

I'm going to tell the folks at work that I got into a fight while in Nashville. Someone said woodturners suck and I had to defend our honor. The other guy looks worse than me. Don't want to admit that I did something stupid. Unfortunately it didn't improve my looks. :)

Re: Almost accident- always be careful

#2

Re: Almost accident- always be careful

eliot

>I can't understand what you have written. Take a look at it; you must have left out a word or something. So what happened? I've never heard of anyone being hit by wood flying off a band saw blade. Say again just what happened, if you don't mind. I'm glad you're, more or less, in one piece.

Re: Almost accident- always be careful

#3

I'm Glad You Are Okay.........

Barry Turner

>It doesn't sound like you did anything wrong........maybe it was the coarse 3-tooth per inch blade.

Reminds me of the time I was hollowing a box, leaning over peering into the box......the scraper handle was alongside the right side of my head. I was concentrating on the cutting edge and ignoring the handle of the tool, which I held (too) loosely in my hand. Suddenly, I got a horrible catch, (Don't catches always happen suddenly?). I was hit upside the head with the tool handle. My glasses went flying across the shop. I was in pain, so I went to the house to check the damage (to my head) as I was bleeding freely from the temple. I went straight to the bathroom, avoiding Joyce until I could see how badly I was hurt. I had a 1/2" wide by 1/4" deep cut to the temple. A little first aid and I was fine in a few days. Oh, I had to readjust my glasses, too. I'm sure the ER would have done a couple of stitches, had I went. I still have a tiny scar as a reminder. Those things always happen so danged fast!

Re: Almost accident- always be careful

#4

Steven Antonucci

Must have been in the water- me too!

steve antonucci

>I wast turning a big chunk of end grain maple that I got from Dom Greco, and the screws pulled out (I know end grain...screws...)

The block jumped off the lathe and hit me in the arm. I have two cuts (both minor) from a round block of wood. Go figure.

Steve

Re: Almost accident- always be careful

#5

Re: Almost accident- always be careful

Carole Valentine

>Well, John, I think you picked just about the hardest wood we have! It's a wonder that didn't fracture your cheekbone. Only piece of wood I have ever had a problem with on the bandsaw was a dogwood log. Fortunately when the blade grabbed it, I didn't get hurt but it sure tore the heck out of my bandsaw blade. Only way I could get the log off was to cut the blade. That whole experience was so violent and happened so fast that I couldn't really tell you what happened. Hope your face heals quickly.

Re: Almost accident- always be careful

#6

Re: Almost accident- always be careful

john lucas

>Eliot. I wrote just what happened. I don't understand it either. I have a sliding sled that fits in the miter slot. It has a V block attached to it and I put round pieces in this V to keep them from rotating while cutting with the bandsaw. Somehow it threw that wood up about 15 inches and to the right about 6 inches hitting me in the cheek bone. I still don't see how it is possible for that to happen. The only problems I've had before where like Carole's example. The wood would grap the blade and bend the heck out of it. Usually this happened because I wasn't holding the wood hard enough. I know I was this time.

Re: Almost accident- always be careful

#7

Re: Almost accident- always be careful

Phil Powell

>I've been using power tools for many years. Without a doubt the scariest

power tool in the shop is my band saw. Last March I was cutting a boxelder

blank when the blade popped. It cut off my little finger and almost the ring

finger on my left hand! Thanks to a skilled surgeon I pretty much got my fingers

back. I thought I was being tool safe before but now.........thanks to body armor

and a frightened atitude it won't happen again. Safety first!!

Re: Almost accident- always be careful

#8

Gotta' be the wood Steve!

Dominic Greco in Richboro PA

>Steve,

You OK man? You gotta' watch that stuff! I was just turning some peppermill blanks and got a small catch. But it was LOUD! Scared the heck outta' me. It was about that time that I called it a day.

I'm curious. Why didn't you turn a tenon on the end and use your scoll chuck?

Later,

Dominic

Re: Almost accident- always be careful

#9

Thank goodness it wasn't any worse!!

Mike from St. Clair Shores

>

Re: Almost accident- always be careful

#10

Re: Almost accident- always be careful

Ken Grunke from SW WI

>I have to agree with Phil, the bandsaw is the scariest tool in my shop. I've had a few incidents just like Carole's, which I attribute to feeding the wood just a bit too fast at the beginning of the cut. It's most liable to happen with a sharp, coarse-tooth blade. I just don't cut anything round with the bandsaw any more, unless there's no other way--and I would change to a finer blade.

Re: Almost accident- always be careful

#11

Keith Tompkins

Re: Almost accident- always be careful

Keith Tompkins

>John, glad you're OK! The only thing that comes to mind is the dogwood branch was sitting in the v-block, but the branch wasn't exactly straight. Some of it contacted the block while some didn't. During the cut, there may have been enough air space under the blank you were cutting to allow the blade to slam it down into the v-block. If that happens, the blade now can grab the very top of the piece, lifting the end off the block and flinging it at you.

A similar thing happens on the lathe when the tool contacts the wood before it contacts the tool rest. A big bang when the tool hits the rest, then another as the tool is forced deeper into the cut and the wood explodes.

BTW, I just read your article in Wood Turning Design....great job!

Re: Almost accident- always be careful

#12

Steven Antonucci

I had it "between centers" :-)

steve antonucci

>Not sure if you saw me at Bill's picnic when everyone suggested I round off on the bandsaw first, but that's what I was doing today too...

Big hunk of wood, with nowhere to grip at the time. After it came off, I put it between centers on a 4-point spur and turned a tenon. Live and learn (stuff I already knew, but needed to be reminded...)

Steve

Re: Almost accident- always be careful

#13

clarification

Tom Sontag - St. Louis

>I too am having trouble envisioning what happened. Was the blade in the cut at all or did this occur the moment the blade hit the wood? If the latter, I have had bandsaw blade teeth bounce off of osage; it is not pretty. With the harder dry woods, I always start very slowly and carefully. Is there some way to clamp the piece into your V jig in the future?

Re: Almost accident- always be careful

#14

Ouch!!

Dave Peebles Lyons, Ohio!

>Hey John,

Glad to hear you are O.K. Things like that can sure happen in a hurry huh. :) I have had my share of mishaps too. None serious, thank goodness.

Best wishes,

Dave

Re: Almost accident- always be careful

#15

Possible explanation?

Ed Moore

>John,

I am glad that you were not hurt more seriously.

You said that the piece of wood was dogwood limb, which means that it was not a perfect cylinder. I am speculating that it was bowed and that the center portion was arched up and was rotated towards you in the vee groove. When the bandsaw blade touched the wood it was able to grab, which rotated the dogwood away from you and into the blade, causing the "Mother Of All Catches", or MOAC. Since it is unlikely that the dogwood was lined up to be cut in a perfectly symmetrical manner, there were unequal forces involved from left to right and it left the vee groove with considerable force. MOAC's aren't fun, no matter which machine they occur on.

This causes me to conclude that pieces of branch in a vee groove on a sled should be placed so that the cut occurs with that portion of the branch as low as possible in the groove, and rotated forward if necessary.

Glad that you are okay,

Ed

Re: Almost accident- always be careful

#16

Re: Almost accident- always be careful

eliot d

>I vaguely remember seeing a big hold down fixture for use with band saws in Louisville. I think it was at the Laguna booth, but I'm not sure. Anybody remember it? Perhaps we we should all get one.