Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Removing a sheared screw?

Posts

Re: Removing a sheared screw?

#26

Re: The Simple Solution

Roger

>Carole, Do you prefer dry wood, green wood,big wood, small wood etc.?

Re: Removing a sheared screw?

#27

Re: The Simple Solution

Carole Valentine

>I like any wood except really rotten wood! LOL Don't need any right now though, thanks to the fine folks at WC. I'm just paranoid about running out so I try not to waste anything! What I really need to do is start lifting weights and get more confident with a chainsaw so I am better able to harvest wood if I can find it before the firewood people do!

Re: Removing a sheared screw?

#28

Re: The Simple Solution

john lucas

>Carole Can you simply mount it on a faceplate with the screw where it is? just use one less screw. The other alternative is to mount it so the screw would be the center of the mouth. Then simply hollow around it until you can break or pull it out.

Re: Removing a sheared screw?

#29

Re: Screw Extractor *LINK*

William Duffield, on the Cohansey

>These are what I use. They work. Nothing else I've found even comes close.

Click on the picture to go to Woodcraft's description of these items.


Addy protocol: I work for a Woodcraft franchise store. If you buy it from Woodcraft's web site, I gain nothing. If you walk into our store and buy it, I still gain nothing, except the satisfaction of having helped you solve a woodworking problem. My guess is other tool companies carry these as well, but you'll have to do your own search of their catalogs.

Re: Removing a sheared screw?

#30

Done!

Carole Valentine

>I used the suggestions about parting on either side of the screw. Parted it down about 3/4" on each side then chiseled the resulting ring out enough to get a good grip with the vice grips. I am glad I went to the trouble. It is a piece of Orkney Elm and has some pretty figure. Thanks for all the help!

Re: Removing a sheared screw?

#31

Dennis in Southern Oregon

Re: Screw extractor

Dennis in Southern Oregon

>Phil's suggestion is a good one. You can make your own if you have a piece of steel or brass tubing that will just fit over the screw. Just file a few saw teeth on the end of the tubing and chuck it in the drill. Has worked for me several times. Dennis

Re: Removing a sheared screw?

#32

Depends on how many times you need to use it :>)

Phil Joines Krum, Tx.

>