Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Stewart Mortimer Light (longish)

Posts

Stewart Mortimer Light (longish)

#1

Stewart Mortimer Light (longish)

Bruce Wiseman

>At the AAW I saw Stewart Mortimer do a hollow form demo where he rough shaped the outside, hollowed and sanded the inside and then using a bright light inside the form, brought the ouside to final shape. The first pic is borrowed from our clubs web site showing him using the light.

The second pic is my attemp to build this light. The only bulbs that I could find of reasonable size with high wattage (40-60w)were candelabra style bases. The base I got from the hardware store had open contact posts on top so I used a piece of plastic coffee can lid and electric tape to insulate the posts from contact.

This will fit into an opening of 1.5 inches and needs about 4 inches of depth. I am concerned about the rather delicate tip of the bulb being inside the form. For those who have seen Stewart's light up close or have made on of their own, what have you done?

Thanks.

Bruce


img

Re: Stewart Mortimer Light (longish)

#2

woops, second pic-sorry 

Bruce Wiseman

>


img

Re: Stewart Mortimer Light (longish)

#3

Re: woops, second pic-sorry

John Lucas

>Bruce Use a 12 volt taillight bulb and a transformer. That's what I learned form Frank Sudol. It doesn't light up the whole inside but I tape it to the tool shapt and it lights up that area really well. The taillight bulbs will take the shock of vibration. The socket is also very small. I can post a photo later tonight but I don't know if the numbers will be visable on the bulb. I've used it a fair amount and they may be worn off. I'll check.

Re: Stewart Mortimer Light (longish)

#4

Good idea on the low voltage, John.

Eddie Pacheco, San Jose, Ca.

>While I have no experience at using a light for this. Heh, I haven't made a hollow form deep or thin enough for the application. I think that the low voltage halogen lights used in outdoor lighting would work real well too. I believe the cheapest transformer from Malibu lighting is about $30.00 and the fixture is about $15.00 or so.

Re: Stewart Mortimer Light (longish)

#5

might want to reconsider

Roger Myers

>I wouldn't suggest the use of this type of bulb, especially at line voltage... suggestion to use a 12volt automotive lamp is better but there are still some risks, albeit reduced.

Remember that in either case, the wires that secure the filament are at operating voltage (120v or 12v, depending on the choice you make)...in other words, if the glass shell breaks you will have 2 line voltage leads exposed inside your turning...the filament will burn out instantly, but it was red hot, and also creates a potential for fire, especially with wood dust/shavings etc. Keep an extinguisher handy...

just my .02c

Re: Stewart Mortimer Light (longish)

#6

Re: Double the Voltage

Greg in Oshkosh

>I believe that Frank Sudol uses a 12 V system as described but he runs it at 24V so the bulb is brighter. The bulbs then only last 10-12 hours but they are cheap and gives a much brighter light. Note that low voltage wiring in equipment is typically 24V since at lower amps this is not felt as a shock hazard. I really would not put a 120V light in the vessel especially with a metal tool in there that I am holding on to.

I believe that Paul Fennel uses a high intensity scientific type lamp with a fiber optic cable that he puts in the vessel. This works very well but is expensive.

Re: Stewart Mortimer Light (longish)

#7

Keith Tompkins

Re: woops, second pic-sorry

Keith Tompkins

>John, I use something similar, except I use a halogen headlight. WOW!

Re: Stewart Mortimer Light (longish)

#8

Re: Stewart Mortimer Light (longish)

Norm Smith in Nova Scotia

>Hey Bruce, that is great information. Thanks. John, Your method seems to be the one to go with.

Being from the back woods I dont get the opportunity to see others turn, let alone demos.

Norm

Re: Stewart Mortimer Light (longish)

#9

Re: Okay, guys, read it again.

Allen Neighbors

>He's asking about putting a bright light inside the form, to see clearly how to finish the outside.

He's not trying to see inside the vessel.

I think.

Maybe.

Allen

Re: Stewart Mortimer Light (longish)

#10

Re: Okay, guys, read it again.

john lucas

>We understand that Allen. The idea is to light up the inside which makes the wood somewhat translucent. You turn one area down to the proper thickness. This area will show up as a light orange to yellow, the rest of the vessel will look darker orange or brown. You simply hollow the turning until the whole piece looks the same color as your thinned area. Knots and dark areas of wood will give false readings so if you have those in your piece stop and measure those areas with a mechanical means before you proceed.

Re: Stewart Mortimer Light (longish)

#11

Re: Stewart Mortimer Light (longish)

Wally Dickerman in Arizona

>J. Paul Fennell uses a fibre optic light inside the vessel while he's hollowing. It's fairly pricey but when you consider what Paul gets for just one of his pieces (thousands) the price ain't bad. Pauls' demos using the light are great to watch. He turns out all of the lights except the fibre optic. The vessel just glows while he's hollowing.

Wally

Re: Stewart Mortimer Light (longish)

#12

Re: Stewart Mortimer Light (longish)

Gary in Zirconia, NC

>I have a Stuart Mortimer light. Just to set some of you right, he does not turn the inside while lighting it. He turns the outside last while the light is inside. The bulb is a 40 watt small base bulb at 120 volts. Craft Supply sold a kit to make it with until about 2 months ago when they discontinued it. I bought mine then. It fits in the tailstock with a morise taper that you make as per instructions that come with the kit. There is no reason to be worried to death that this is dangerous, just conserned. Since the unit is held in the tailstock, it goes into the hollow form without touching the form or tool.

Re: Stewart Mortimer Light (longish)

#13

Re: Stewart Mortimer Light (longish)

Bruce Wiseman

>Thanks Gary, what kind of bulb does it use? I know Stewart plugged his in to the 120v wall outlet. (That's why I went that way. I think I would use a GF circuit just to be safe as possible.) As I recall he had a problem with the line switch not working and someone took it off somewhere to fix.

He did stress that it should be done with green wood and the inside completely turned and sanded before you insert the light. The high wattage helps to dry the green wood from the inside out.

Re: Stewart Mortimer Light (longish)

#14

Re: woops, second pic-sorry

Bruce Wiseman

>Hi Keith,

Thanks for the info. I am looking for the brightest light possible without a lot of techno stuff. Everytime I've replaced halogen bulbs on my car, they warn not to get oil from you skin or anything else on the bulb. Have you had any problems along that line?

TIA

Bruce

Re: Stewart Mortimer Light (longish)

#15

Re: woops, second pic-sorry

Duane C.Leach

>Hi Bruce. Looks like it will work fine. The only danger I see is if you break through the wall while turning the outside. Some wood fragments may break the light,but if you are weraing your face sheild all should be well. It will take a lot of beating before it's torn off the tailstock.

Other options are many. See if this style of turning works for you before putting a lot more into it.

Happy turning

Duane

Re: Stewart Mortimer Light (longish)

#16

Re: woops, second pic-sorry

Bruce Wiseman

>Wise words as always, my friend. Thanks. By the way, up a little early this morning? I see the post time of your message was 3 am !

Re: Stewart Mortimer Light (longish)

#17

oil on bulbs answer

Roger Myers

>The caution about oil on the bulbs relates more to having it outgas inside the reflector assembly than anything else. The halogen headlight bulbs burn VERY hot so be extremley careful not to contact them or serious burns can result... Quartz bulbs (halogen headlight bulbs are not quartz glass) can be affected by oil, but the standard replacement headlamp bulbs i.e., 9004's, the concern is outgassing in a reflector causing a loss of reflectance... So for your proposed application no issue with the oil.... again, caution, they burn very very hot!

Re: Stewart Mortimer Light (longish)

#18

Re: Stewart Mortimer Light (longish)

Gary in Zirconia, NC

>Here is a photo of the light I made from the Stuart Mortimer light kit. The bulb has no info. on it but it is 40 watt. I used a different cord and the wood was not supplied. You can see the inline switch in the photo.


img

Re: Stewart Mortimer Light (longish)

#19

Re: Stewart Mortimer Light (longish)

Bruce Wiseman

>Thanks, Gary. That is almost exactly the same as the one I made.

Bruce