Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Bad Platter, Sewed Up

Posts

Bad Platter, Sewed Up

#1

Bad Platter, Sewed Up

Allen Neighbors

>Got into this bowl, and it was so bad, I made a platter. I intended to fill the inclusion with turquoise, and the more I turned, the worse it became. So I finished it, and sewed it up with copper wire.

Didn't know what to do with the ends, so I just twisted them, and curled the rest.

There is another spot on the edge that is filled with coffee and super glue.

Comments?

Allen


img

Re: Bad Platter, Sewed Up

#2

Re: Bad Platter, Pic 2 

Allen Neighbors

>


img

Re: Bad Platter, Sewed Up

#3

Re: Bad Platter, Back side 

Allen Neighbors

>


img

Re: Bad Platter, Sewed Up

#4

Re: Bad Platter, Back closer 

Allen Neighbors

>


img

Re: Bad Platter, Sewed Up

#5

Steven Antonucci

Like it, but lose the curli-ques

steve antonucci

>and maybe a slightly heavier gauge wire to make the copper stand out better...

Steve

Re: Bad Platter, Sewed Up

#6

Re: Bad Platter, Sewed Up

Barbara Gill, Remlik VA

>Allen, that is real interesting. Another treatment would to make it look like an open zipper. I can't remember which turner uses the zipper idea.

Re: Bad Platter, Sewed Up

#7

Re: Steve, that is

Allen Neighbors

>the same thing I thought as I was taking the photos. I may do that later this evening. How would you tie up the ends?

Allen

Re: Bad Platter, Sewed Up

#8

Re: Sounds good, Barbara, but...

Allen Neighbors

>How do you do that?? Just use a larger guage wire, and wrap it around the sides only?

Allen

Re: Bad Platter, Sewed Up

#9

Re: Sounds good, Barbara, but...

Barbara Gill, Remlik VA

>I don't have a clue Allen.

Re: Bad Platter, Sewed Up

#10

Re: Sounds good, Barbara, but...

Bill Stehman

>Allen,

Great save and I like it. Maybe what Steve said .... bigger wire but I really don't know.

bill

Re: Bad Platter, Sewed Up

#11

Re: Bad Platter, Sewed Up

Carole Valentine

>What a design opportunity, Allen! I like it. I think I would have chickened out on turning it though. You are a brave man, indeed!

Re: Bad Platter, Sewed Up

#12

Geeeeshh!!!

Mac

>You go to a gathering,buy a new, fancy lathe , and you go all artsy on us.

Re: Bad Platter, Sewed Up

#13

Re: Bad Platter, Sewed Up

Barry Irby

>Have you seen the ones "repaired" with a leather shoelace? I think that is actually a real technique used one working bowls.

How about on yours you start at the outside edge and go toward the center? Then when you get there, drill two more holes the size of the wire that do not go all the way through to the front. Insert the ends of the wire into them and glue them in with CA.

Re: Bad Platter, Sewed Up

#14

Re: Geeeeshh!!!

Allen Neighbors

>I wish.............. :o)

Re: Bad Platter, Sewed Up

#15

Re: Bad Platter, Sewed Up

Allen Neighbors

>Barry, I'd seen those before. I gave my Sister one of my bowls that she picked out last November... one turned from White Oak, that had a terrible gash/inclusion filled with turquoise... (I turned it wet, and let it dry and warp). She loved it. Took it to New Mexico. It warped more, got all bumpy inside and out, and let out a loud "Cra-a-ck" one evening. It split more, along the side of the turquoise. She brought it back Wednesday, and I laced it with leather. :o)

She still loves it! I'll try to get a pic of it, before she goes back.

Allen

Re: Bad Platter, Sewed Up

#16

Re: Bad Platter, Sewed Up

Ron in Drums PA

>Great Save Allen, this one is excellant!!

Re: Bad Platter, Sewed Up

#17

Re: Steve, that is

Don Evans

>Drill a hole same diameter as the wire, loop the wire in sort of an arc and put the end into the hole. It just disappears from view that way and everyone will be looking on the bottom to see where it goes.

Further explanation, don't drill all way through, just enough to hide the end of wire, put little epoxy in hole before inserting wire end.

Don

Re: Bad Platter, Sewed Up

#18

Re: Thank you...

Allen Neighbors

>Thanks for your comments and suggestions, one and all.

I've got to come up with a decision, now. :o)

Allen

Re: Bad Platter, Sewed Up

#19

Re: Bad Platter, Sewed Up *LINK*

Mike from St. Clair Shores

>John Lucas was talking last week about a turner named Paul Stafford. Although I also like what you did Allen.

MIke


http://www.woodturner-gallery.com/zipperturnings.html

Re: Bad Platter, Sewed Up

#20

Ric Taylor

Re: Like it, but lose the curli-ques

Ric Taylor

>I agree about the curli-ques, but I like the thin wire.

Ric

Re: Bad Platter, Sewed Up

#21

Re: Leather Stitching

Allen Neighbors

>This is the one.


img

Re: Bad Platter, Sewed Up

#22

tried rawhide?

TDaniel

>Al, I use rawhide strips to lace cracks. I get it from Jack White leather products. I soak it in water for a couple of hours before using it and then lace with it wet. As it dries it shrinks and tightens up. If you tuck the ends back under they will not come loose once they are dry. It is available in 1/16" and 1/8" strips about 3 ft long; I prefer the 1/8" but then I don't do small vessels very often. Let me know if you need contact info.

TD

Re: Bad Platter, Sewed Up

#23

Re: tried rawhide?

Allen Neighbors

>TD, thanks for the suggestion. I've used wet rawhide for other things before, but my Sis lives in New Mexico, and really gets into the Southwest stuff. She's going to put a couple of beads on the ends of these and put it on the mantel with some other SW style things.

Allen

Re: Bad Platter, Sewed Up

#24

Re: I'm a coward at heart...

Allen Neighbors

>and mostly looney at other times. Duct tape works wonders. :o)

Thanks, Carole.

Allen