Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Dave Hout at GAW meeting

Posts

Dave Hout at GAW meeting

#1

Dave Hout at GAW meeting

john Lucas

>Looks like I'm going to have a lot of reading to do when I get home. I was reminded of the Georgia Association meeting before I left (thanks harvey) so I went last night. Dave Hout(sp) was thier demonstrater and he demo'd the Hout bowl skew. it's an interesting tool. It's use is very similar in use to the way some people use a spindle gouge inside a bowl but less likely to catch. Dave said it is because the tool is rectangular instead of round and it sits flat on one side. This keeps it oriented correctly for the cut. I'll admit I'm one of the people who didn't see a need for this tool but now I will go home and make one and really learn the differences. I'll report what I've learned of course.

The GAW is a great group of people and I always enjoy seeing the members I know and meeting new ones. My friend Nick Cook was there and it's always good to see Nick. Hope you all are having fun. I've ridden 55 miles on the bike, played 18 holes of golf and completely tuned up my dad's new radial arm saw. man the guy that owned that must have been one heck of an interesting woodworker. The fence was off over 1/4" on a 10" cut and the board he was using for a fence was bowed almost 1/4" along it's length. It's singing now though, took me most of the day to align everything.

Re: Dave Hout at GAW meeting

#2

Your dad's radial arm saw

Mike from St. Clair Shores

>John,

What type of blade does your dad have on that saw. For years radial arms got a bad rap because they were being used with the wrong blade. The blade needs to have a negative hook in order to work properly and not run into the work when cross cutting. I can now pull mine into a 2x12 and stop in the middle of the cut.

Mike

Re: Dave Hout at GAW meeting

#3

Re: Your dad's radial arm saw

john lucas

>Mike I have no idea what blade he is using. I've never owned a radial arm saw before so I was figuring everything out as I go. It doesn't seem to pull through the work except in a 45 degree cut where it has a slight pull. It may have the right kind of blade. He has owned one for years and it died so he bought this used one. It's in great shape just needed a lot of tuning.