Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

live center question??

Posts

live center question??

#1

live center question??

jared

>Hello: I was wondering if anyone knew if the live center supplied with thePM 3520 lathe is the exact same as a Oneway live center. I lost the aluminum cone center that screws on to the live center on my Powermatic. I imagine that it was knocked off my lathe and burned in a large pile of shavings or something like that. I see in the Packard woodworks catalog that you can buy a replacement Oneway cone center and it looks exactly the same. Are the threads on the PM and the ONeway live centers the same? thanks in advance. Jared

Re: live center question??

#2

Re: live center question??

john lucas

>They are probably not exactly the same I suspect Oneway uses better parts but the thread size is the same and you can swap things like the cone center.

Re: live center question??

#3

Re: live center question??

Jim Terry

>Jared I have one of each and at this time I can not tell which is which. The parts are completely interchangable.

Re: live center question??

#4

Re: live center question??

Mike from St. Clair Shores

>I bought the large oneway cone in Louisville, and it screwed onto the powermatic one. After a few turns it became quite a tight fit but it worked.

Mike

Re: live center question??

#5

thanks

jared

>Thanks for the info. I am ordering some stuff today so will get one of the aluminum cones included. Jared