2 morse to 3 morse
gary s clarke
>Does anyone know of an adaptor to change 3 MT so that one could use a 2MT Jacobs chuck in a 3MT tail stock? thanks.
Knowledge You Can Build On — Est. 1998
2 morse to 3 morse
gary s clarke
>Does anyone know of an adaptor to change 3 MT so that one could use a 2MT Jacobs chuck in a 3MT tail stock? thanks.
One-way has it
TDaniel
>
Also at Packard Woodworks *LINK*
david
>This was an easy one.
Packard
Morse taper adapters available from Enco, McMaster
Craig Daymon
>, Grainger, MSC, Reid Tools, pretty much any industrial supplier...for most likely a better price than OneWay. (OneWay makes great products, but this is one that I very much doubt they make any better.)
http://www.use-enco.com
http://www.mcmaster.com
http://www.grainger.com
https://reidecom.reidtool.com/xephr/qbe/homepage
You'll find them on page 302 of the Enco on-line catalog for about $6.
-Craig
Re: Morse taper adapters available from Enco, McMa
gary s clarke
>thanks, you saved me some $$$