Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

2006 Turning Events Critique Poll

Posts

Re: 2006 Turning Events Critique Poll

#26

Full Names and Places PLEASE

Ruth Niles

>Terry and all who have responded referring to other shows; could you, please, tell us the name of the show and the location at least once in your post? Personally I know SSS is Southern States Symposium and it's in GA but not everyone does. And I know I should know SWAT but remind me.

Re: 2006 Turning Events Critique Poll

#27

Re: The Cost of a Symposium? Suggestion

Ruth Niles

>Jennifer, one of the board members was discussing this and it was mentioned by a few that free lunches could have been feasible if they hadn't purchased 5 lathes to give away. I agree because someone who already has 2 or 3 lathes could win, someone who is just starting turning and decides in 4 months they don't like it could win, etc. There were several scenarios brought up and one point was agreed on by just about every one (1 person disagreed) that all the woodturners would get a little bit back with free lunches (or a discount) rather than 5 random people. This is small, but a lot of small changes amount to noticable improvements.

I don't know about anyone else but I am not impressed with a big fancy hotel or a huge city (personally I don't like cities). There are some pretty classy campground type places. The Ohio Valley Woodturners Guild use the most perfect facility. Good rooms, clean showers, WONDERFUL home-cooked meals (3 a day included with registration) and a lot of places for small groups to gather and do what woodturners do best------ talk turning!

Re: 2006 Turning Events Critique Poll

#28

Re: Mike, the Gathering was affordable...

Bob Fawcett

>Terry,

I hope you and your club can make have the gathering again. I sure enjoyed it and believe that all who attended did also.

I understand the space issue and I know many put in a lot of hours to make it the success it was.

Re: 2006 Turning Events Critique Poll

#29

Re: Mike, the Gathering was affordable...

Don in Central Illinois

>TD, if you go to a county fairgrounds, you might want to see if some of the local churches would be willing to cook and reasonable sell food. It would give them some income for a worthy cause and take some of the burden of feeding everyone from you and your fellow hosts. I couldn't make it this year but would love to be there in 2007. Just my $.02 cents worth.

Re: 2006 Turning Events Critique Poll

#30

Re: I agree with Bob, TD.

Allen Neighbors

>The Gathering at your place was, #1, the greatest thing for me, and #2, the first time I ever attended anything of the sort. That's why I didn't know what an IG was, or how an auction of turnings went down, or anything else. I have an idea, now, what goes on, and the only thing holding me back from other symposiums is the cost involved... and the cost is the same for everyone... travel, lodging, entry fees. But some of us poor folks can't afford to pay the exhorbitant fees charged by some of the symposiums, after the travel and lodging expenses. Like Jen says... we're tapped out. :o( Had I had to pay travel trailer parking fees, in Georgia, I might not have been able to make it. Others feel the same as I do... you overworked yourself, and Elaine, to help others out. Stars for your crown, in my book. Marolyn and I are indebted to you both. :o)

About the Symposiums: If wood turners have anything to do with the organization of these things, we ought to keep the politics out of it. Completely out of it. (I think it's the politics involved that causes them to tell you, as a vendor, what lathes you can and cannot sell at your booth.) What business is it of theirs, as long as you pay your booth rent, and help to draw a crowd? They need to butt out.

Just my .02.

Re: 2006 Turning Events Critique Poll

#31

I agree Ruth

TDaniel

>I don't care about a fancy hotel either; hot showers would be much better.

TD

Re: 2006 Turning Events Critique Poll

#32

Al. it seems to me that it ....

TDaniel

>would be easier for the folks who think they have to stay in the most expensive hotels to drop down a notch or 2 than for the others of us to have to stay in a place that requires us to leave the meat out of the beans for a few months. An economical symp should be tried.

Re: 2006 Turning Events Critique Poll

#33

Re: Amen!!

Allen Neighbors

>

Re: 2006 Turning Events Critique Poll

#34

Re: I agree with Bob, TD.

Wilford Bickel

>Allen,

Not being part of the committee that organizes SSS, I do know that every lathe I have seen in the demo rooms has been furnished by one company. Most are used and every one I have seen carried a price tag from that company. I have a feeling there is no politics here it is business - getting lathes furnished. I'll check this out when I can. I will say they should offer other companies the same type of option (or a bid system) and explain the situation to other vendors if this is what is happening!

Re: 2006 Turning Events Critique Poll

#35

vendor's point of view

Gary Evans Tallassee, TN

>Hi Wilford,

I have been selling wood at the regional symposiums in the Southeast for the past several years. For the most part the small symposiums have a fair price for their booth space. However, once you count the prep time to get ready for the show, the time spent at the show, the cost of gas, food and lodging, you have a pretty good sized pile of coins that you have to provide just to show up. I usually turn a profit, but the profit is normally less than I could earn for the same amount of time spent in other pursuits. One reason I do the shows is because I love the wood and I love sharing it with other turners.

One thing I've found, at least in the wood business, is that there are very few additional sales generated by being at a particular show. I have on occasion sold some blanks as a result of meeting someone at a show, but it doesn't happen very often.

Never the less, I will continue to do the shows because I really enjoy hanging out with other wood turners, not the least of whom is Ruth Niles. One of these days, I hope to get a little farther afield and do the Texas show, the NY show and the AZ show. The Ohio Valley show didn't seem to want to have me as a vendor when they found out I wanted to have a "Used Tool" table where folks could bring stuff and sell it to each other.

And John, Choice Woods was at the TAW show a few years ago when I did it. You guys only had 89 folks registered. That was not a financially profitable endeavor. 8^] Still, I've tried to get back in every year since then, but they evidently have a smaller facility now and no room for another wood vendor.

Now, as far as the small symposiums are concerned for the woodturner, I don't think there is any way that you can rub shoulders more closely with name turners. The smaller venues allow time for the feature turners to set around and visit. Frank Sudol sat down with Ruth and I at FL in Jan and we had quite a nice time. The FL symposium is also particularly nice as there is nothing to keep you from sitting down at the breakfast table or lunch table with someone whose work you admire. They have it on the campus of a Baptist camp.

I don't know of any better way to spend your time than to attend a regional symposium, except maybe to go to Terry's get-together. I plan to be there if they have one in '07. I also plan to go to Indy for that little shindig. I still haven't made it to an AAW show, so I can't comment on that.

Gary Evans

Talasi Hardwoods

Re: 2006 Turning Events Critique Poll

#36

I have also furnished a lathe for the SSS

TDaniel

>However, the following year no one seemed to remember.

Re: 2006 Turning Events Critique Poll

#37

Re: 2006 Turning Events Critique Poll

Ed Heuslein

>Jennifer, I don't know as it's only about a six hour drive for me. But I'll check and let you know. May take a day or two because of the weekend.

Ed

Re: 2006 Turning Events Critique Poll

#38

Re: 2006 Turning Events Critique Poll

Ed Heuslein

>Howdy Jennifer: I just got off the phone with the president of SWAT. He said he does not believe there is a commercial airport in Temple. SWAT is flying all Lead Demonstrators into Dallas (DFW) or Austin and suggest others plan on the same, then renting cars to drive to Temple (which is only about a hundred miles by freeway all the way) to Temple. Same holds true for 2007 when SWAT will be back in Wichita Falls, TX. Fly to DFW and drive to Wichita Falls.

He will get info on the web site reflecting additional information shortly.

I hope this helps and I really look forward to meeting you and others. I promise, you'll enjoy yourself if you're able to make it.

Ed

Re: 2006 Turning Events Critique Poll

#39

Re: Hotel cost

Bill Turpin in WNC mountains

>After all, if the symposium is worth attending, all you do in your hotel room is sleep and take a shower. Our room going was $55 and returning was $65. We slept and got just as clean as in Louisville at $119 plus 18% tax. The only real plus to the hotel was the convenience of stashing loot upstairs when it got too heavy. We really enjoyed the open feeding at the Florida symposium cafeteria. You could sit and talk to anybody. Of course the Gathering was also off the chart for the same reasons.

Bill in WNC mountains

Re: 2006 Turning Events Critique Poll

#40

Re: 2006 Turning Events Critique Poll

Allen Neighbors

>Jennifer, 2007 you can fly to SWAT in Wichita Falls, they do have a commercial airport with some commercial flights, and also Air Taxi service to and from Dallas and OKC. (Some jet and some prop). Wichita Falls Commercial is located side by side with the Shepard Air Force Base. (three letter identifier is SPS)

I used to be an Air Traffic Controller that handled overflights from Dallas to OKC, many of which stopped at SPS and LAW (Lawton, OK).

I now live 2 hours West of Wichita Falls.

Allen

Re: 2006 Turning Events Critique Poll

#41

Re: 2006 Turning Events Critique Poll

Clay Foster

>Jennifer,

This year SWAT will be in Temple, about 75 miles from Austin and about 150 miles from Fort Worth/Dallas.

Next year it will be in Wichita Fslls, about 100 miles from Fort Worth/Dallas and about 60 years from reality.

If you want to attend this year, I'll find you a ride from DFW airport.

When SWAT is in Wichita Falls, Dr. Happy A** is usually there.

Re: 2006 Turning Events Critique Poll

#42

Re: 2006 Turning Events Critique Poll

Philip F Duffy

>The AAW at L'ville was my first experience and won't be my last but there were aspects of the show that have to be improved. The demos were great, if you could see the screen and the guy operating the cameras knew what he was doing. In my experience, 3 out of 10 is not a good result. Most times the camera oper. had no idea what he was showing the audience, and one guy was giving me vertigo sp I left! The 78 minutes it took me to get to the front desk from the end of the line in the lobby was horrific. The attitude of the Gault House staff needs a dynamic change for the better. But, in their view, we won't be coming back so why bother! The auction ran until some late hour and must have offered those who stayed late some good buys. Why not a secret bid auction that starts on day inside the Instant Gallery area? Many such lessons-learned exist and we need to take heed, or lose members and future attendees. To brush off all the criticisms is a mistake. We need to become a better organization, not one stuck in the mud. Phil

Re: 2006 Turning Events Critique Poll

#43

Flying into SWAT

Stuart Johnson

>I'm not sure but I think you might be able to fly into Austin. This might involve a plane change but believe me freeway driving from DFW is not for the faint of heart.

Re: 2006 Turning Events Critique Poll

#44

Re: Flying into SWAT

jeff jilg

>Austin is about 70 minutes from Temple. And if you time it right you'll have zero traffic. If you time it wrong you'll be headed north out of Austin with the 3pm-6pm daily business traffic.