OK Allen its been 3 days ...
Bob Fawcett
>we need a picture with shavings :-). Get your wife to take it, and you be in it, so we can see the GRIN :-)
Knowledge You Can Build On — Est. 1998
OK Allen its been 3 days ...
Bob Fawcett
>we need a picture with shavings :-). Get your wife to take it, and you be in it, so we can see the GRIN :-)
Still looking for that picture :-)
Bob Fawcett
>
Re: Still looking for that picture :-)
Allen Neighbors
>Sorry, Bob, all I've done is roughturn pieces and put 'em in the soup. However, today I was finishing one Ash hollowform, when I got a catch, and it broke loose, catching my hand between it and the toolrest. (Just a blood-blister), and a cracked hollowform. Got another, end-grain, Hollowform from Camphor nearly finished, and discovered some of the pith in the bottom had left a hole. Got to fill that in the morning.
My good friend from California sent me a box of wood... Leopardwood, Wenge, Bocote, and Purpleheart... (gloat-snoopy dance here) and some Masur Birch. I'm going to turn it in the morning, too...
Then, maybe I'll take some pics... :o)
I will tell you this. Since I got the new lathe, I have carried out four 30-gallon trash bags of shavings... BIG shavings....
I do appreciate your asking. :o)
Allen
Re: Still looking for that picture :-)
Bob Fawcett
>Allen,
What type of "soup" do you use?
I haven't tried any of the various things with roughouts yet other than putting in a paper bag to dry. Success has been around 80 percent. A couple of failures were early on when I just started and I am sure I left them too thick.
I would love to see some of your finished work, but the picture is just one of curlies and your grin :-). Your shop looked way too clean in the first pic.
Re: Still looking for that picture :-)
Allen Neighbors
>Shop was way too clean, because I had to move and sweep to get the new lathe inside.. You ought to see it now.. I normally think a clean shop is a sign of a sick mind... :o)
Bob, I have a big (abt 28" dia) plastic tub (about 25 gal) that I use for my green wood soup. (This photo was taken over a year ago, and I had come inside with some small blanks, and threw them in 'til I could get them rough turned.) It's about 3/4 full (now) of a 50/50 mix of Ivory dish washing detergent and water. I've added two gallons of denatured alcohol to that over a period of about a year. It sat for about 3 months of that period, when I didn't use it. Some folks say it stinks, but what do they know? I'm like Dustin Hoffman in "Rainman"... I don't mind.. :o)
I first began with a 24 hour soak, and that didn't seem to do any good; everything I placed in it for that time, still cracked and went oval.
I added time through experimentation, and have settled on 7 days.
For just over a year, I have had very few crack, and less warping than any other way I've tried to dry roughed pieces. I still wrap in brown paper, as per Dave Smith's alcohol process, after soaking. Three weeks later, I can turn to finish. This is hot, dry, country, and my shop is not air conditioned. I have a swamp cooler, and open eaves.
I keep some blanks in an old refrig that I use as a kiln. That's working, too. It just isn't big enough.
Allen
Re: Still looking for that picture :-)
Allen Neighbors
>Sorry about the size of the pic.. still learnin' :o)
Allen
Thanks Allen
Bob Fawcett
>