We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My 1640 came in today! When I received the call the truck was already in town, so I put in a call for Volunteer Firefighters, and 7 came running. Had to put it on a trailer, to get it around to the shop. Moved it inside without a hitch. The skid was exactly as high as my risers, so it slid right off the skid and onto the risers. (Makes a 49" spindle height).
I have to turn a handwheel, before I can put that big chunk of Cherry on there, so I have the handwheel Glued-up, waiting for the glue to set. Still have some things to do while that's going on. :o)
>Now wait a minute Allen...you mean to tell me you have not turned ANYTHING yet??? You don't NEED a handwheel to turn SOMETHING! Just a few shavings! That poor lathe feels naked with not so much as a speck of dust to cover itself! :)
Congrats Allen...I know you will love it and I am eager to see some fantastic turnings from it.
>thing I turned was a handwheel. I needed it to get that big chunk of Cherry on there. I'll mount it in the morning, and you can bet your boots that I'll be using a bowl gouge. :o)
>I got it dirty later this evening. It took me a long time to quit Snoopy Dancing, but I turned the handwheel. I needed some way to turn the spindle when I lift that heavy chunk up there.
Thanks, Carole, and I, also, am anxious to see some "fantastic" turnings from it... :o)
>Al, I am tempted to come out there to watch the grin on your face with that lathe and the bowl gouge. Happy turning! Life is too short to turn on a Grizzly lathe. :)
>That's one great white shark we'd all welcome. And I bet it's not just a bowl gouge, but a TX Ranger Sorby. I know I love mine. You're going to be knee deep in curls pretty soon. Have fun. 8)
You are going to love that lathe! It will put a smile on your face everytime you see it. Your woodturning is going to more about the hunk of spinning wood and less about the lathe.
If you start turning on the outboard side you will likely ignore the inboard side of the lathe except for MT mounted "stuff".
>you become convinced that you bought the "right" machine. You could have gotten a good lathe for less money. I am curious as to how long it will take you to say "I am glad I spent the extra bucks".
>It didn't take that long, TD. "I'm glad I spent the extra bucks". There, I've said it.
The Oneway 1640 is a remarkable machine. The motor, the drive system, the pendant switches, the ways, the tailstock, the banjo, the live center, the 24" banjo, the bed extension for turning outboard... all of it. Sure enough a dream machine.
I only have one complaint about it. I'm not accustomed to such precision operation, of anything, and it takes some getting used to. It will probably take a week of steady turning to get accustomed to operating this machine.
I turned outboard this morning, and inboard this afternoon. And I think I'll probably spend more time turning outboard than inboard. (Only when I need the extra length, probably).
Up to now, I've not had too much trouble trying to clean up my shavings. Today, I had to clean up twice. The shavings were getting in my way too much... before I just walked on them... today they were too thick. And now, I have to build a rolling tool rack, because I'm walking myself to death, getting this, getting that, etc.
Anyhow, Old Griz is going to enjoy a much-needed rest. :o)
Yep, I'll say it again, "I'm glad I spent the extra bucks." I think it'll pay for itself, in the long run.
>Congradulations Allen. The first thing I turned when I got my Oneway was the hand wheel...a chunk of mesquite about ten inches in diameter. Turning will never be the same. Enjoy!!!