Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Old Sayings:

Posts

Old Sayings:

#1

Old Sayings:

TDaniel

>I remember my mother saying :"you have to hold your mouth right". When I tried to thread a needle for her she always said this. I finally was convinced that I could do anything if only I could hold my mouth right. Has anyone else been told this? I fear there are too many new turners that do not know the importance of this.

TD

Re: Old Sayings:

#2

My grandfather used to say that

Bill Howatt

>

Re: Old Sayings:

#3

Re: Old Sayings:

Mark Mandell - Gone Round In Jersey

>No, Terry.

Just you.

|;-}}}}}

Re: Old Sayings:

#4

Re: Old Sayings:

Bob Fawcett

>You're absolutely right TD. I have heard this most of my life also. I finally figured out I wasn't holding my mouth right and my turning has improved tremendously. I finally feel the cut and can do many cuts without looking. Its all from holding my mouth right. Of course finding the sweet spot on the tool doesn't hurt.

Re: Old Sayings:

#5

Re: Old Sayings:

Doug Thompson near Cleveland

>That's been my problem all along... Sheesh!

Thanks for the hint,

Doug

PS - I just showed my wife how I should hold my mouth when turning she said don't do it "it looks like your in pain" LoL

Re: Old Sayings:

#6

Re: Old Sayings:

georgetroy

>Does all this apply to hitting the golf ball Terry? Or is the wood ball.

Re: Old Sayings:

#7

Dick Hines

Re: Old Sayings:

Dick Hines

>Heard it all my life.

I got one for you. I will do it directly." My grand mother used to say that. I grew up thinking "directly" meant later.

Re: Old Sayings:

#8

Re: Holding my mouth "right" helps....

Jamie Donaldson

>... when I am hitting a golf ball!! Now if I could just do it the same right way every time!!

Re: Old Sayings:

#9

Re: Old Sayings:

Jim Shaver Oakville, Ont.-Let's Go Oilers!

>Hi TD,

I totally love to hear old sayings. I often hear my grandmother's words coming to life in my own voice from time to time...I always enjoy hearing her visit in my day...I sure miss her.

:-)

Take care,

Jim

Re: Old Sayings:

#10

My Dad's Favorite:

Dave Winters, Steamboat Springs, CO

>"Only fools and newcomers predict the weather!"

And yes, My Grandma had to hold her mouth right when threading a needle. I have to do it when using the skew.

Re: Old Sayings:

#11

Re: My Dad's Favorite:

Mike from St. Clair Shores

>Got together with 7 0f my 8 siblings last Sunday for my Dad's 84th Birthday. Everyone started talking about my Dad's favorite sayings when we were growing up. Well we said them with the same tone he used to use and everyone was laughing and we just kept bringing up more and more of them. I forgot most of them until I heard them again. I'd love to share some of them with you.%$#@#%^^$$#, *&%^%$#$#%^&.., (*(&^%%^*()()((*&^%$$###*))*^%$#. Sorry I had to censor them and use code, but I want to keep on Ellis's good side.

Re: Old Sayings:

#12

Belling a Buzzard

Barbara Gill, Remlik VA

>My father-in-law had many interesting sayings from the Northern Neck of VA. One of the most unique was "He doesn not have enough sense to bell a buzzard". He did not know the origin of the saying. I can see someone being put out in a garden or field to scare birds away with a bell but why a buzzard?

Re: Old Sayings:

#13

Re: Old Sayings:

TDaniel

>my grandma used that one a lot.

Re: Old Sayings:

#14

Re: Belling a Buzzard

TDaniel

>I never heard that one. :) How about "you can lead a horse to water but you can't make him drink". I guess these old sayings will soon be gone forever.

TD

Re: Old Sayings:

#15

I'll bet Mac knows some.....

TDaniel

>really old ones :)

Re: Old Sayings:

#16

Re: Old Sayings:

Ken Oakley-Sunny St. Cloud, Fla

>My grandfather once told me-"If it wasn't for the dumb people is this world how would you know you are smart?"

Another was "Never put your fingers where you wouldn't put your tongue".

Re: Old Sayings:

#17

Re: Old Sayings: My favorite

Ruth Niles

>"If you think you're in love, first take a laxative, you might be just constipated, it has the same symptoms: light-headness, fluttery stomach..." Actually this an Old Polish saying I just made up.

Re: Old Sayings:

#18

Re: Old Sayings: My favorite

Ed Karch

>Don't know any clean ones. Caught a skunk in a live trap last night. One must be very careful when releasing it in the morning.

Re: Old Sayings:

#19

Use your head Herman!

Dominic Greco in Richboro PA

>My Dad had a TON of old sayings. I'm not sure if it was his background as an Iron Worker, or just the fact that he was from South Philadelphia ("South Philly"). Some were just so priceless that I adopted them into my everyday speaking.



"Born on a Wednesday looking both ways towards the weekend!" means that the individual who he was referring to never had their mind on the job at hand, but was always looking towards their time off.



"That's a real Kill-Me-Quick". That's when you purposely put yourself in a real dangerous situation. Like endangering your safety by using the wrong tool for a job just cause' you're too lazy to go back to the truck/tool box.



"Layout is 80% of the work". This is one of my favorites. My Dad used to spend 2 hours laying out all the cuts for a project. I can still see him with a pad of scratch paper with a crude sketch on one side and all the double checked figures written down the other. Then he'd take 15 minutes to cut them all. At the end, the project would go together with no problem what-so-ever.



"Use your head Herman!". This one here is my absolute favorite. That's cause' it was my Grandfather's and my Dad's.

Here's the story behind it. My Dad and Grandfather were both Ironworkers and on a job together. There was this one HUGE guy Ironworker named "Herman" who was strong as an Ox and just about as bright. He was working in my Grandfather's "gang" (as they called a group of workers assigned under a particular Foreman) a couple of floors up on some steel work. A beam was being lowered by the crane and the guys were standing around it trying to guide it in by hand so they could bolt it in place. The crane had lowered it too much and and the men were attempting the almost impossible task of manually lifting a steel I-beam into place. Herman was one of the guys trying to muscle the beam into place. My Grandfather sees this and yells, "Use your head Herman!!", meaning for him to allow the crane to lift it and try again. Herman nods as if he understands and stoops under the beam. He positions his helmeted "melon" right underneath the beam, and proceeds to try and stand up and jack the beam in place! Needless to say, the guys around him started laughing so hard that they almost fell off the building.

Now whenever my brothers and I see someone doing something the hard way, we say (mostly to ourselves) "Use your head Herman!"

See ya around,

My ugly mug


Dominic

Re: Old Sayings:

#20

Jim DeLaney, Austintown, Ohio

Re: Old Sayings:

Jim DeLaney, Austintown, Ohio

>"If y'all can't run with the big dogs, y'all better stay on the porch..."

Re: Old Sayings:

#22

Jim DeLaney, Austintown, Ohio

Re: Old Sayings:

Jim DeLaney, Austintown, Ohio

>My dad had one: "If your dumb enough to burn your a**, you'll just have to sit on the blister." Essentially, he meant you'd have to take responsibility for your own screw-ups...

Re: Old Sayings:

#23

Complaint Department on The Roof;

Barbara Gill, Remlik VA

>Take the Elevator.

One of my Grandmother's

Re: Old Sayings:

#24

Re: Old Sayings:

Bob Fawcett

>Some of my favorites.

Never challenge worse.

No good deed goes unpunished.

You can't make something idiot proof, as soon as you do they build a better idiot.

Re: Old Sayings:

#25

Re: Old Sayings:

tek-Brunswick, Ohio

>Yes, I heard you have to hold your mouth right, and my children heard it from me. Here is another of my Dad's, " I pay you to work, not to think. Now use your head." Another " If you can go out and drink with the boys, then you can get up and work with the men."