Just so I don't forget
Carole Valentine
>Been so long since I turned a simple bowl I decided I better do one today so I didn't forget how. I swear bowls are harder than hollow forms! Ambrosia maple. 10" x 2 3/4"
Knowledge You Can Build On — Est. 1998
Just so I don't forget
Carole Valentine
>Been so long since I turned a simple bowl I decided I better do one today so I didn't forget how. I swear bowls are harder than hollow forms! Ambrosia maple. 10" x 2 3/4"
You still got the touch
Ron in Drums PA
>
Re: Just so I don't forget
Russ Fairfield
>"I swear bowls are harder than hollow forms!"
That's because you have to finish the inside.
Re: Just so I don't forget
Jim Shaver Oakville, Ont.-Let's Go Oilers!
>Hi Carole,
I like the bowl, I really love the shape of the bowl at the rim...That looks great!!
Take care,
Jim
Re: Just so I don't forget
Don in Central Illinois
>Being a newbie, just how much do you finish off the inside of a hollow form? I assume you can't get it as smooth as a bowl, but how much effort or how smooth is the inside? TIA.
Re: Just so I don't forget
Don in Central Illinois
>PS. Forgot, beautiful bowl. You definitly haven't lost your touch.
Re: Just so I don't forget
Carole Valentine
>As good as I can get it and that depends on the size of the opening and the type of wood. Some woods you can get a real nice finish cut with the hollowing tool, some you can't. At least I can't! LOL I just ordered a set of 12" sanding clamps Saturday for sanding the inside of hollow forms. Now if you are Terry Daniels, you throw rocks inside and tumble them for a week or so to smooth the walls.
Re: Just so I don't forget
Carole Valentine
>Good point, Russ, but it seems harder for me to establish the form on bowls for some reason.
What?...You Don't Finish the Inside?...
Wally Dickerman in Arizona
>
Re: Just so I don't forget
David
>Carole, IMHO, I think with ogee curves it is really hard to "nail it". My personal preference would be to reverse the convex curve at the bottom with the ogee at the top. I like the in and out flow of the ogee at the bottom and think the convex curve at the bottom half makes the profile look weighted down. Just my 2 cents.
Sanding Clamps?
Ron in Drums PA
>What are 12" sanding clamps?
Re: Sanding Clamps?
Carole Valentine
>Ron, they are just locking foreceps. Packard has them(p. 61) You can grip a piece of sanding sponge or sandpaper to get at the inside of forms. Just don't do it with your fingers through the holes on the foreceps.
thx
Ron in Drums PA
>I always called them "foreceps"
Re: What?...You Don't Finish the Inside?...
Russ Fairfield
>Whether the inside of a hollow form is finished, or not, depends on who you are trying to please, and in what level of quality you want your work to be seen.
My opinion is that it isn't finished until the part unseen is "finished"; and that can be the bottom of a bowl or the inside of a hollow form. Some people appreciate that, and some don't. Most don't know the difference. Some people are willing to pay extra for that, and some aren't.