Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Maybe I shouldn't ask but..........

Posts

Re: Maybe I shouldn't ask but..........

#26

Packard

Carole Valentine

>Packard sells some decent tools branded with their name at very reasonable prices. In fact my "Gouge of the moment" is a Packard 3/8". DOn't know who makes them for them but they are English.

Re: Maybe I shouldn't ask but..........

#27

Re: Packard

john lucas

>I will second what Carole just said. I highly recommend the Packard line of tools as an inexpensive high quality tool. I have 2 of them and they are among my favorites even though they cost almost 1/3 less than a name brand.

Re: Maybe I shouldn't ask but..........

#28

Same as...

Brian Hahn in SW Wisconsin

>As far as I can tell, the Packard brand seems to be the same as the Hamlet tools at Craft Supplies USA. Same descriptions, same price.

Re: Maybe I shouldn't ask but..........

#29

Re: Maybe I shouldn't ask but..........

bob davis

>do not buy any more tools! purchase a good sharpening system....no tool works unless it is properly sharpened

Re: Maybe I shouldn't ask but..........

#30

Re: My experience level

Ray Carson, New Jersey

>Hey Dave,

I turned quite a bit in high school, I'm just getting back into it. It's like riding a bike. :-)

Thanks for the advice.

Ray

Re: Maybe I shouldn't ask but..........

#31

Re: Yep Good advice, thanks !!

Ray Carson, New Jersey

>

Re: Maybe I shouldn't ask but..........

#32

Re: Maybe I shouldn't ask but....Thank you all !

Ray Carson, New Jersey

>Hey gang,

I'll be 40 in a few weeks and I haven't forgotten too much of what I've learned in my high school wood shop days. I graduated in 1984, born in 1966 for those of you trying to do the math. Ha Ha Ha.

Looks like I have a lot to learn about sharpening. I usually send my table saw blades out for sharpening and I don't use many hand tools that require hand sharpening. Go ahead laugh. I just don't have that kind of time with young kids and what not.

I'm leaning towards getting better chisels, that meaning anything with better steel. I'm also going to look into some books and sharpening systems that were recommended by you all.

I want to thank everyone for all the great advice. Once again, the gang at Wood Central hasn't let me down. In the mean time, I'm going to send my chisels out for proffesional sharpening and work on my technique a little more.

Thanks agian,

Ray

Re: Maybe I shouldn't ask but..........

#33

Re: Maybe I shouldn't ask but....Thank you all !

Carole Valentine

>Oh dear, Ray. I cringe when I hear the words "professional sharpening"! LOL Besides, gouges need to be touched up on the grinder so often in the course of turning that you would be "sending them out" every hour or less!;) Get a sharpening system as soon as possible (I use Wolverine on a Woodcraft grinder. You may find that you don't need new tools immediately.

Re: Maybe I shouldn't ask but..........

#34

Re: Maybe I shouldn't ask but....Thank you all !

Walter Ahlgrim

>I would bet that the pro sharpener will say he can sharpen your gouge. If you�re paying I�m betting he would be willing to sharpen a brick for you. Ask him how many bowl gouges he sharpened last week. I must sharpen at least 3 times for every project.

Walt A

Re: Maybe I shouldn't ask but..........

#35

Re: I agree....BUT..

JamieDonaldson

>Actually Jim, the slice is in the left knuckle position- I fixed my slice by " strengthening" the L hand grip position- roll the 2nd knuckle one click clockwise! Piece of cake!