Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Disk Storage

Posts

Disk Storage

#1

Disk Storage

Ray Thompson - Middletown,IN

>Those little round disks seem to congregate everywhere so I found some scrap paneling and an old piece of pvc and made a two story carousel. I suppose you could put some bearings under it to make it handier but I usually keep it turned to 60 grit. The 2" disks are a little tight in a 2" pipe I found out after the fact, but a 2 1/8" forstner bit would make it about the right size.

Ray


img

Re: Disk Storage

#2

Re: Disk Storage

Jim Shaver Oakville, Ont.

>Hi Ray,

So simple it's excellent!

Take care,

Jim

Re: Disk Storage

#3

Great Idea!

Jennifer@Indy.USA

>Ray, this is a fantstic idea! Are you making your own disks? From the sheets like Mark Kauder does?

Jen

Re: Disk Storage

#4

Alternate storage scheme

David

>Got this from another club member. Tilt out storage bins keep dust and shavings out.


img

Re: Disk Storage

#5

Sorry about photo size

David

>Tilt-out bins have labels on front to indicate grit size for 3" disks. Holds more than 50 disks per bin. These are standard storage units available from Home Depot or Lowes.

Re: Disk Storage

#6

Nope, found them for $.13 ea.

Ray Thompson - Middletown,IN

>Even a cheap skate like me can buy them.

Ray

Re: Disk Storage

#7

Re: Disk Storage

Barry Irby

>I like it Ray. Could use the same idea to make a "seven tool" tool holder. Put a bearing on it and you have a carousel. I have been using the tilt out drawers or bins someone else posted and they work too. I tuck the used piece in the front about half way in and then use it again until its to ugly.

One tip. What ever way you do it, put that top piece in with the grit up. I have made the mistake of putting the fuzzy side up or out in my case, and mine are too close to the lathe. Shavings really cling to the fuzzy side. PITA to clean each one to use them.

Re: Disk Storage

#8

Re: Nope, found them for $.13 ea.

Randy G

>Mind if I ask them where you found them at that price? I need to build up my stock of them. Thanks..

Re: Disk Storage

#9

http://www.premierabrasive.com

Ray Thompson - Middletown,IN

>Tell 'em I sent ya.

Ray

Re: Disk Storage

#10

Re: http://www.premierabrasive.com

Peter Teubel

>Our club buys from them in quantity and resell to the members at a small markup. Sales have significantly helped our treasury.