Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

art/style/design education - where do I start?

Posts

art/style/design education - where do I start?

#1

art/style/design education - where do I start?

Devon Palmer

>WOW,

I REALLY enjoyed reading the thread below on art, design, etc.. It seems as if there is a shared intrinsic sense of understanding the topic (yeah, overgeneralizing :) I love it when people speak so passionately as the purest truthes come from the heart.

Since I'm a newbie (turning less than 2 years seriously), I'm always looking for any excuse to improve and understand all techniques with my craft. After reading the posts below, I checked out the local art college for classes that would seem appropriate for giving me a "base" understanding of common terminology, concepts, a techniques in art, form, design - everything that isn't toolwork, process, and slamming a chunk of wood in a chuck and holding on for dear life :).

The class list was confusing to say the least.

Can anyone offer some direction or resources? (like suggested reading?) I've been reading Mike Darlows book on design and have REALLY enjoyed it, but, it seems to lack some emotion. It'd almost be nice to have some fresh perspective thats complimentary to, but, having nothing to do "with" woodturning. Maybe sculpture?

- Devon Palmer, Columbus, Ohio

Re: art/style/design education - where do I start?

#2

Re: art/style/design education - where do I start?

Ron in Drums PA

>Take a class in pottery, and learn to throw pots.

Re: art/style/design education - where do I start?

#3

Re: art/style/design education - where do I start?

John Lucas

>If they have any classes on 2D and 3D design take those. They are really interesting classes as long as you don't need the grade and can take what the instructor says with a grain of salt. They force you to think about what you are doing and I find that very interesting. I've only been able to sit in on a couple of classes here and find them fascinating. At first I thought the instructor was throwing out a lot of BS but I late learned that he's just trying to get you to look at all sides of the issue and make cognitive choices.

I also read, or at least tried to read, Mike Darlow's book on design. It's interesting but really difficult to understand some of the sections.

Re: art/style/design education - where do I start?

#4

Re: art/style/design education - where do I start? *LINK*

Russ Fairfield

>Yopu might find something of interest in the first two articles at the link.


http://www.woodcentral.com/russ/russindex.shtml

Re: art/style/design education - where do I start?

#5

second pottery

tek-Brunswick, Ohio

>My daughter is a ceramics major at Kent State. I've learned a lot from seeing what she is doing and talking to her instructors. I even got to throw a pot (bowl)! Potters and turners have a lot in common.

Re: art/style/design education - where do I start?

#6

Re: art/style/design education - where do I start?

Ed in Sptbg.

>Devon, you might be interested in "The Nature and Aesthetics of Design", by David Pye. Excellant book. I am a long time lurker here and have learned lots from you guys. I am a machinery designer by profession. About 35 years ago, the best mechanical design engineer I ever worked with told me: "A good designer or machinist should have, at least, a basic art ability; for if a design looks right, it usually is right."

Re: art/style/design education - where do I start?

#7

Thanks, Russ!

Jack Savona

>To all the talented people who post here on this site and share their ideas and experiences, I say 'thank you'. However, I have to say an extra loud 'thank you' to you, Russ, for so openly sharing your vast knowledge and experience. Your "Corner" is a must read for anyone who turns and has probably educated me in turning more than any other source.

I just read your two sections on design and again say, "Thanks!"

Re: art/style/design education - where do I start?

#8

Re: Ditto!

Karl in IA

>

Re: art/style/design education - where do I start?

#9

Third Pottery

david

>When taking wheel thrown pottery, my interest led me to explore publications featuring well-known potters and explored the shapes they are well-known for. Toshiku Takaezu, for instance, is to potters like Wally Dickerson is to WC turners. Turning wood is very similar, and wood finishing is very much like glaze on the clay--sometimes visually indistinguishable.

Re: art/style/design education - where do I start?

#10

I'll second that....

Devon Palmer

>I ran across Russ's finish articles well over a year ago and have studied them at length (and often). To this day, my favorite finish is multiple coat of tung oil thinned with turpentine....

Thanks!

Re: art/style/design education - where do I start?

#11

Re: art/style/design education - where do I start?

georgetroy

>You don't need to take art classes. For bowls look at the southwest styles. I think it is pottery with class. I see pottery in the craft shows which I think is chunky. You want to do goblets then look hard at the ones in crystal and also the bowls in crystal. In fact you will find the shapes that are most pleasing to the eye in the wife's China cabinet. Want to do spindles, how about Early American and say Spanish styles spindles. Doing balusters and columns you will find what you need in the catalogs at the lumber yards. In nature, flower bell shapes are inspiring. This is what I have done in my 25 years of turning. Design and style is most important, but if you don't have good techniques to carry it off, then take classes. GT

Re: art/style/design education - where do I start?

#12

Richard Raffin's "Turned Bowl Design" Book

David Propst

>Get it... It should be required reading for all new bowl turners. I go back to it again and again.

Best Regards,

David