Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

new boxes

Posts

new boxes

#1

new boxes

john lucas

>Here are a couple of boxes Made for gifts. This one is Cherry with purple heart lid and yellow heart ball on top. I didn't like the shape of the lid. It's too flat but my friend will like it.


img

Re: new boxes

#2

Re: new boxes

john lucas

>This one is a technique I'm working on with Stone Flec spray paint. You can sort of fingernail carve through it. Look for more on this when I have time. I think there are some really fun possibilities. Turns out that Stone flec doesn't bond very well to lacquer so you can selectively remove parts with your fingernail. If your careful you won't damage the finish below. The lower box is cherry and the other parts are walnut.

Re: new boxes

#3

I hate when I don't post the photo 

john lucas

>


img

Re: new boxes

#4

Re: new boxes

georgetroy

>I like the stone flec box the best, they are both good. Thanks for showing. GT

Re: new boxes

#5

Re: new boxes

Bill Howatt

>very nice John. I like the yellow egg treatment at the top of the finial a lot.

Bill

Re: new boxes

#6

Re: new boxes

Bill Stehman

>John,

Both are exceptional and great creativity. Thanks for sharing.

Re: new boxes

#7

Re: new boxes

Ed Kelle

>nice boxes John. I think the yellowheart and purpleheart look great together

Re: new boxes

#8

Re: new boxes

Brian Hahn in SW Wisconsin

>That's a very interesting technique and it sounds a lot easier than the more traditional methods. I may have to try it some time. Thanks for sharing it.

I also like the egg detail on the first box. Neat.

Re: new boxes

#9

Re: I hate when I don't post the photo

Wayne

>John,

I really like your innovative ideas and file in memory for the day when I get good enough to maybe use some? What finish is on the last box posted?

As a rookie I look mostly and experiment as much as possible.

I live back in the woods on a lake in NW Ontario and do not have anyone to help me so this WC is invaluable and I have learned so much in a short time by reading and looking at posts.

I spend my winter in Americus, GA and have a 5th wheel with an add-a-room (workshop) to house my new portable Jet mini. Will put a picture up soon!

Best regards,

Wayne

Thanks for sharing and I hope to post some work as soon as I get set up for images!

Re: new boxes

#10

Re: I hate when I don't post the photo

john lucas

>Wayne The box was sprayed with lacquer and then sprayed with the Stone -flec. Then I "carve" the paint with my fingernail after it had dried overnight. Then I sprayed with more lacquer. The stone-flec comes with a spray finish but I didn't take the time to find out if it was compatible with my lacquer so I just used what I know.

I used to make lamps and sprayed them with the stone flec. Everyone I gave on to still has them. The stone flec doesn't hole up to abuse, you can chip it easily which is why I spray multiple coats of finish over it.

Re: new boxes

#11

Re: new boxes

john lucas

>Thanks George I like the upside down pear shape. I haven't used that before but it seems to work nice for a box with an additional foot.

Re: new boxes

#12

Re: I hate when I don't post the photo

Jim Shaver Oakville, Ont.

>Wow John...

Three elements here that grab my eye, and all three work in balance for me too. My eye is drawn to the textured surface of the lidded box, almost before I see the form...then it goes to the finial, smooth and really well done for my liking, then my eye goes to the base, it has the illusion to me that the box is balanced on the base.. I Like It!!

take care,

Jim

Re: new boxes

#13

Re: I hate when I don't post the photo

john lucas

>Jim I've debated on the finial over and over. I feel like the first sectin is too short. It would be much more elegant if the bottom cove shape extended further with more taper but then I think the finial would be too tall for the box so I would have to shorten it somewhere else which wouldn't look right. Cindy Drozda's vessels will accept a longer finial without looking out of place. I may have to redesign the vessel to see if I can get that affect.

Re: new boxes

#14

Re: new boxes

john lucas

>Yellow heart and purple heart are great woods together especially for segmented work. They are both similar in hardness and grain structure and if I remember correctly they have shrinkage rates that aren't far apart. The contrast is really nice. The only problem is over the years the purple heart goes a little brown and the yellow heart loses some color but it takes a bunch of years to do that.

Re: new boxes

#15

Re: I hate when I don't post the photo

Mike from St. Clair Shores

>John,

I like both boxes, but this one is outstanding. The finial is perfect to my eye. I also like the stone-flec finish. the colors with the wood finish seen to be a perfect match. In about 2 1/2 weeks I'm going up to Traverse city, MI for a 2 day seminar with Cindy Drozda and 1 day of hands on. I hope I'll be able to come close to the quality of your work after I return home and practice what Cindy will try to teach me. But with my big paws I don't know if I'll ever be able to make something That looks so delicate. Nice work!

Mike

Re: new boxes

#16

Re: I hate when I don't post the photo

John Lucas

>Mike I've always admired Cindy's work and hear she's a good instructor. You'll have fun. Big paws don't have anythingn to do with it. I make very tiny miniatures so you should be able to make delicate normal size work.