Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Long time ago, in another life...

Posts

Long time ago, in another life...

#1

Long time ago, in another life...

David

>I was a flatworker. On the side, mind you. This side business was called ArchiClocks, because 1) I was an architect and most of the designs had arches, and 2) what I made were a line of clocks I designed. Did the trade show and gallery shops routine. What I earned affirmed that I couldn't/shouldn't quit my day job. Got a Nova 3000 four years ago this month and haven't looked back since. Currently have a Vickmarc VL300 sortbed with a 3-hp motor. Long live the world that spins!


img

Re: Long time ago, in another life...

#2

Here! Here! ..... : )

Jennifer@Indy.USA

>

Re: Long time ago, in another life...

#3

My Story Too

Barbara Gill, Remlik VA

>I even made some clocks. :-)

Re: Long time ago, in another life...

#4

Maybe I shouldn't admit this, but...

Scott Hurley in N. VA

>I recently took a break from the lathe to make a clock. OK - I turned the knobs... I've recovered, though, and am back at the lathe.


img

Re: Long time ago, in another life...

#5

Re: Long time ago, in another life...

Mac

>Will have to admit that I too did that unspeakable thing.....


img

Re: Long time ago, in another life...

#6

Another Flash from the Past

Jennifer@Indy.USA

>Here's another flash from my past....what seems like many moons ago!



Did I do that?

Jennifer :)

Re: Long time ago, in another life...

#7

Re: Another Flash from the Past

Jim Shaver Oakville, Ont.

>Hi Jen,

How could you give up on furniture...look at that table and those dove tails...was it too easy??

:-)

Take care,

Jim

Re: Long time ago, in another life...

#8

Dang Jen...

Molly Winton

>That's just impressive as hell. I'm a resounding failure at flatwork. Don't ask me to make anything that requires precise measurement. I'm in awe.

Re: Long time ago, in another life...

#9

Flashing and mooning???

Ed Moore

>

Re: Long time ago, in another life...

#10

I wonder .... PICS

Mike Rubes, Apex, NC

>... how many of us turners started out as furniture makers and then discovered the lathe? I know I did and that my "flat" projects have taken quite a hit since I've been turning! :) This is a bookcase I made for my little guy about 4 years ago. Man, seems like longer than that!

Interesting idea for a thread.

Mike

Not giving up my Bedrock 605 in Apex, NC





complete with half blind dovetails



Re: Long time ago, in another life...

#11

Re: Another Flash from the Past

John Lucas

>Wow, I'm impressed. You are a hard working lady.

Re: Long time ago, in another life...

#12

Still mixing it up

Eddie Pacheco, San Jose, Ca.

>I have two bathrooms to remodel and a home office to complete before I can get a new lathe. That's the carrot SWMBO is holding in front of me.

This fireplace project sat for a long time while I played with the "bargain" lathe I got a few years ago. I do a few little turnings in the evenings to practice, but mainly I get my lathe fix by looking at your (you folk's)work. The lathe carrot is working 'cause I've been picking up the pace on getting the other projects done. Still, flatwork takes for--ever to see a finished result.

Oh, that small little turning on the middle shelf was kindly sent to me by our WC Honcho, Ellis, a few years ago.


img

Re: Long time ago, in another life...

#13

Before I started turning *6 PICS*

Ron in Drums PA

>Some stuff I did years ago that I found on my HD







Re: Long time ago, in another life...

#14

Re: Another Flash from the Past

Ed Kelle

>very nice Jen. It is always fun to switch back and forth between round and flat. My tools get jealous if they are not used for a while

Re: Long time ago, in another life...

#15

Re: Long time ago, in another life...

Mac

>I am soooo ashamed,do they have a 12 step program for reformed flat siders?


img