Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Large Maple Platter

Posts

Large Maple Platter

#1

Large Maple Platter

Jennifer@Indy.USA

>Hi All, Here's a platter that I just completed the other day. It's the largest platter that I've turned to date at 16" diameter. The wood is maple and the black coloring is gesso. I textured the center of it with my needle scalar and then came up with this burned design for the rim. The swooshes are filled with texture from a ball pen from my burner and then several of them have a larger divot burned in with a larger ball tip where I seated a brass B-B into it with CA glue.


I also textured and colored the back. It just looked way too barren for my liking.


And a close up of the rim.


This piece is one of 4 entries of mine in an exhibit at the Indianapolis Art Center, that starts next Friday. This exhibit is in collaboration with two other shows going on at the Art Center. One titled Contemporary Indiana Woodworkers and the other Shooting Blind-Photographic images by the sight impaired. The show will run through mid June until the Furniture Society convention is over so I'm thrilled about it lasting through that.

As usual, I'm on the fence a little bit about a few things with this one. I really need to start nailing my burning a little bit better. "Molly! Help"! I'm not sure if it's the wood I'm burning on, or if my skew tips aren't sharp enough...( I do hone them lightly on an 8000 grit water stone?) but I'm finding it sometimes difficult to get a nice smooth line like I would like. I love the way the texture came out. I think it leaves a really neat look to the platter. I intentionally removed some of the gesso on the high spot on the transition between rim and inner section. At first I thought I would cut it with a tiny gouge to get a cleaner look, but after just using sandpaper I decided I like the sort of rustic look it gave. I thought it went better with the textured areas. One thing I learned is that large platters are a $#@!&% to get a nice smooth middle across the flat. This one isn't perfect....

Please feel free to comment. I'm curious to hear what others think of this one. It got a thumbs up from Weston :)

I know the pictures are hideous so no need to comment on that. I was scrambling to get them done and my soft box was too small for this one. So I was doing the hanging sheet, clothes-pin, light holding with hands, feet and all other devices I could find in a rush before scooting this one out the door.

Thanks for pausing to take a peek at my platter. Say that 10 times fast!

Jen

Re: Large Maple Platter

#2

Large Maple Platter - SUPER!

Ed Moore

>Jen,

I think the platter came out great. I really liked the treatment in the rim, my eye went right to those figures. The "Gatlin-gun" treatment in the center did a super texture job for you. Great Job all around!

Ed

Re: Large Maple Platter

#3

Re: Large Maple Platter

georgetroy

>Real neat Jenn, I like your handwork and design. Let's see soon more soon. GT

Re: Large Maple Platter

#4

Re: Large Maple Platter

john lucas

>Superb Jennifer. Your really improving in your work.

Re: Large Maple Platter

#5

Re: Large Maple Platter

Ken Grunke from SW WI

>Jen, this is a gorgeous work of art! The swooshes look like little tadpoles--or if I carry my imagination a little further, spermatozoids swimming around an egg! Curious to hear what you intended them to signify, if anything.

Lot of time and effort into this platter, it's plain to see. Congrats on the show ;)))

Re: Large Maple Platter

#6

Re: Large Maple Platter

Ron in Drums PA

>I'm not a big fan of decorated forms, that's why I never comment on them. But this one I happen to find so wonderful I had to say something.

Re: Large Maple Platter

#7

It looks awesome!

Dominic Greco in Richboro PA

>Jennifer,

You never cease to amaze me. Fantastic job!

See ya around,

Dominic

Re: Large Maple Platter

#8

Re: Large Maple Platter

Mike Rubes, Apex, NC

>Hi Jennifer,

Very well done! Congrats on the show as well. I agree that the back would have been too plain without something and I think you got it right with the continuation of the color from the front.

I'm with you on the smooth burned lines. Some of mine turn out great and others get "splotchy".

The bbs give a nice little sparkle of color to the plate, nice touch.

Thanks for the pics, I always like to see what's coming out of your shop.

Mike

Turning with a deadline in Apex, NC!!!

Re: Large Maple Platter

#9

clarification....

Jennifer@Indy.USA

>...after I read my post again....I realized that what I have written may make it sound like my entries to the Art Center exhibit are a solo exhibit....not hardly! I am part of the Indiana Contemporary Woodworkers exhibit.

Solo shows are well down the road :)

Just thought I should clarify.

Re: Large Maple Platter

#10

Re: Large Maple Platter

Jennifer@Indy.USA

>Thank you Ron....that is a lovely thing to say.

Jen :)

Re: Large Maple Platter

#11

Re: It looks awesome!

Jennifer@Indy.USA

>Blushing....thanks Dom :)

Re: Large Maple Platter

#12

Re: Large Maple Platter

Jennifer@Indy.USA

>Ken, I honestly don't know what I intended them to look like....but I'll go with your vison :)...sounds good to me!

Thanks for the kind comments.

Jen

Re: Large Maple Platter

#13

Keith Tompkins

Re: Large Maple Platter

Keith Tompkins

>Hi Jen, I like this one....well done, and it opens up lots of possibilities for future pieces.

I like the thought that went into the base, especially the motif in the center...maybe another bb in that one as well?

I like the fact that you are adding color and texture to your work....it's a great way to showcase your abilities and personality.

Very nicely done!

Re: Large Maple Platter

#14

Re: Large Maple Platter

RevDoug

>Quite lovely, Jennifer. And congratulations on the showing.

Turn 'em round,

Re: Large Maple Platter

#15

Re: Large Maple Platter - SUPER!

Jennifer@Indy.USA

>Gatlin-gun is right Ed. That thing is LOUD. It's about the only tool I actually use ear plugs with. I do like the texture it leaves though. Thanks for the nice comments :)

Jen

Re: Large Maple Platter

#16

Excellent work young Lady.

Dave Smith, Longview, WA

>

Re: Large Maple Platter

#17

A great platter, Jen--love those BB's!

David

>

Re: Large Maple Platter

#18

Swishes!!

Jim Shaver Oakville, Ont.

>Hi Jenny,

What a great looking platter. At 16 inches this one is really nice for size and the scale of your details. I love the dance of swishes and ornamental BB�s, the tactile feel should be a nice detail to actually feel in your hand. I also enjoy seeing the texturing and colouring you have added to the centre portion of the platter, both on top and on the bottom. The swish detail on the foot is really cool.

I can see you potentially using this theme in hollow forms and even some of your bowls�this journey is indeed filled with some lovely paths and side roads, a wonderful way to enjoy the ride, you never know what you'll see around the next bend, eh!

Take care,

Jim

Re: Large Maple Platter

#19

Re: Large Maple Platter

Molly Winton

>Hey Jen, I'll be very happy to help out with the skew pens. Bring them with you to the Gathering and we'll take some time to work on this. I recommend bringing your pens, so I can see them and help get the right edge if they need tweeking. This is exactly what I look forward to doing.

This platter is lovely. It has an elegance to it. I also like the texturing and color on the back of the platter. It helps complete the piece.

Re: Large Maple Platter

#20

Re: Large Maple Platter

Carole Valentine

>Wonderful piece, Jenn! Love the BBs too - never would have thought of that in a million years. ;)

Re: Large Maple Platter

#21

Re: Large Maple Platter

William Duffield, on the Cohansey

>I really like the platter.

I'll offer a tip that might help you with the flattening. Use a card scraper, like you might use for flat work, with the corners rounded off, so they won't dig in. Just turn the burr on the central 3/4 or so of the edge, and smooth off the ends of the edge.

Re: Large Maple Platter

#22

Re: Large Maple Platter

Jennifer@Indy.USA

>William, thank you. You know I tried that. I have a card scraper just like you described. I had a fresh burr on it and I just couldn't get the results I was looking for. I finally had to resort to my 100 grit scraper :)

I have used the card scraper with good results on other turnings but it just wasn't cutting it on this one.

Jen

Re: Large Maple Platter

#23

Re: Large Maple Platter

Jennifer@Indy.USA

>Molly, thanks....I will definitly bring my pens and probably my burner too. You said you might be looking for a new unit so this might give you a chance to check out the Optima and the pens they offer.

Can't wait!

Jen

Re: Large Maple Platter

#24

Re: Swishes!!

Jennifer@Indy.USA

>Hi Jim,

Yes...I do seem to scramble around on different paths. I think I kinda like it that way. I am enjoying the exploration of using different elements in my turning. It really makes it so much fun!

Thanks for your kind comments.

Jen :)

Re: Large Maple Platter

#25

Re: Large Maple Platter

Chris K in MD

>SWEET! very nice Jennifer one of your best IMO!