Recent Work
tek-Brunswick, Ohio
>Like everyone else I'm striving to improve my skills. I finished some work and got some background paper. These Photos are the results. Critiques and comments welcomed.
Tom
Knowledge You Can Build On — Est. 1998
Recent Work
tek-Brunswick, Ohio
>Like everyone else I'm striving to improve my skills. I finished some work and got some background paper. These Photos are the results. Critiques and comments welcomed.
Tom
Re: Recent Work
tek-Brunswick, Ohio
>My parents brought me som Mesquite from Texas. This bowl os 8" D and 3 3/8' high.
Re: Recent Work
tek-Brunswick, Ohio
>Here is the profile. This time I checked my spelling before posting.
bottoms up
tek-Brunswick, Ohio
>
Double Bowl
tek-Brunswick, Ohio
>This one was a real challange. I don't think I ever had the lathe over 325 r.p.m. on this one. My variable speed doesn't have a readout. I have a Nova 3000, not the DVR, with a variable speed motor on it. The piece is 15" L x 12" W x 3 1/2" H. I believe it's Big Leaf Maple Burl.
Profile
tek-Brunswick, Ohio
>I had to turn the head of the lathe 90 Deg. to the bed to turn this. I also had to cobble together a bigger tool rest to reach. I turned it on 3 centers. One for each hollow and one more central to the piece. I used the central center to true everything up before doing the insides.
Bottom
tek-Brunswick, Ohio
>The screw holes didn't blend in as well as I would like. I thought that they would be easier to hide with all of that burl figure.
Weed Pot
tek-Brunswick, Ohio
>This is for our club turn & learn project. I think the wood is Yew. I rescued it from the landfill. Nice wood from the dump anyway. I got something a little wrong with the camera angle. The bottom does not cut off that abruptly.
Beech Platter
tek-Brunswick, Ohio
>I hade a couple of nice pieces of splated beech. Here is a platter from one of them. It is 9 1/2" D and 1" high. The form looks like a church collection plate to me. I have another blank this size. I may make another plate the same size, but treat the rim differently. I was thinking of making the top of the rim concave and the bottom of the rim convex, just the opposite of this one. Just a little experiment in design. I'll post the other one when done.
Profile
tek-Brunswick, Ohio
>The plate being long and narrow in profile made taking the picture difficult. Maybe it would be better just ot photogragh from the center to one side?
Bottom
tek-Brunswick, Ohio
>Not signed yet.
Re: Recent Work
Mike Rubes, Apex, NC
>Hi Tom,
Those are very nice! The double bowl is really great, I love the use of the piece to get that one.
Just curious, did you have to counterbalance it at all when spinning it off center?
Thanks for the pics,
Mike
Been told I'm a bit off center myself, in Apex, NC....
Re: Recent Work
Bernie
>Very nice Tom I really like the Maple Burl piece
I hope to see it Saturday, I was thinking of doing
something like that too.
Bernie
Re: Recent Work
tek-Brunswick, Ohio
>I was planning on brining it Saturday Bernie. I hope you are bringing some pieces too.
Re: Recent Work
tek-Brunswick, Ohio
>No I didn't counterbalence it. That probably would have helped, but I didn't figure out how I wanted to do that. I just ran it slow enough(under 300 r.p.m.) so the lathe didn't dance too bad , took light cuts, and honed my gouges.
Ditto on the burl piece...
david
>You did a great job on that piece. I used to have a Nova and know what you mean about having to improvise when the piece has no tailstock support.
Re: Double Bowl
Ed Kelle
>This looks really nice. And it sure is more than I'd care to try. I bet you got a good breeze going with that spinning around. Good job on all your pieces!
Re: Recent Work
Glenn Hodges
>That has to be one of the prettiest NE pieces I have ever seen.
Re: Recent Work
Rick Davenport
>I really like your mesquite bowl.
Beautiful piece, well turned and finished.
Rick
Thanks Ed
tek-Brunswick, Ohio
>I did catch more than the breeze once. It grazed my arm when I reached for the shut off switch. I just got a scratch, no real harm done. It got my attention though. The shadow of the outside edge was really hard to pick up.
Thanks Rick
tek-Brunswick, Ohio
>When I saw the knar led up twisted log dad brought me I knew there was some wild looking wood inside. I watched an old video from our club library. It was Chris Stott Natural Edges and Hollow forms. The tape is from 1994. The chucks are outdated and he wasn't using the Irish, Elsworth, or fingernail grind, which is so popular now, on his bowl gouges. But the man has the basics down Pat, and those don't change. He did a good section on how to orient a natural edge piece, to get good results. I guess I learned something.
Thanks Glenn
tek-Brunswick, Ohio
>See my response to Rick. I tried to get another bowl out of the other half of the log. It had a bark inclusion all the way through it. The blank flew in half when I had it spinning between centers. Luckily the loose piece flew off of the back side and hit the wall instead of me.
Thanks David
tek-Brunswick, Ohio
>My Nova is serving me well. Some day I may get a heavier lathe. I knew what I wanted to do with that burl as soon as I got it. It took me a while to figure out how I could best accomplish that. It also took a while to feel confident enough to do it.
Tom