Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

How To Drill HSS?

Posts

Re: How To Drill HSS?

#26

Re: here they are

George Van in WI

>Thanks Wayne, I appreciate the feedback.

Re: How To Drill HSS?

#27

Re: How To Drill HSS?

Bob Fawcett

>You could grind an impression in the tool and make the clamp with a lip. This should reduce the possibility of a projectile to acceptable levels.

Re: How To Drill HSS?

#28

Re: How To Drill HSS?

George Van in WI

>Sounds like that would be worth a try Bob.

Re: How To Drill HSS?

#29

Re: How To Drill HSS?

RussFairfield

>George,

There are a lot ways to hold a piece of HSS to mild steel, other than with a screw. I have a couple toolswith tips that are held in place with the soft silver solder, and they haven't popped off yet. One of those is a hollowing tool that looks like a straight Kelton Hollower.

I also have one of those Kelton scrapers wwhere the tip is held to a long rod with a screw. I got tired of the screw coming loose every time I tried to use it. I threw the screw away and glued the bit to the rod with JB Weld. I also glued a piece of 5/8" rod to the tang of a large roughing gouge with JB Weld. That was about 5 years ago and neither of them have come loose yet.

Re: How To Drill HSS?

#30

Re: How To Drill HSS?

George Van in WI

>Thanks for the information Russ. I talked to the neighbor who welds this morning about silver solder. He says he has plenty and bring my stuff on down. He gets to harvest firewood from our woodlot as a neighborly gesture, guess what goes around comes around. Is this a photo of the product you used? I have never used it so I'm glad you told me about it. Guess I should be able to get it at an auto parts store and try some; I will get some the next trip into town.


img