Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Spalted White Birch Bowl

Posts

Spalted White Birch Bowl

#1

Spalted White Birch Bowl

George Van in WI

>I haven�t posted anything in a while so I thought I would show this white birch bowl I finished a while ago. I roughed and cored a bunch of these off a tree I found last year and am finally getting around to finishing a few. It is 13�x5.25�, finished with oil/varnish mix, then buffed on the beal. I am not sure if I am completely satisfied with this finish and after I complete the few that are started will try a reduced gloss finish down to Krylon fixative only finish. This wood has been a lesson in keeping a tool very sharp as an almost sharp tool will break out the fiber badly. I will appreciate good cherry when I finish this bunch. Some areas were stabilized with Wally�s 50/50 white glue mix to cut cleanly.

Comments and suggestions are welcome.


img

Re: Spalted White Birch Bowl

#2

Re: Spalted White Birch Bowl

Sean Troy

>Your bowls are some of the finest looking I've seen. Your wood choice and shape are second to none. I was so glad you brought some to the symposium.

Re: Spalted White Birch Bowl

#3

Re: Spalted White Birch Bowl

Wally Dickerman in Arizona

>Very well done George. The 50/50 treatment can save a lot of wood.

I will make one suggestion. I don't find a flat rim attractive. Since this bowl is undercut, a slightly outward sloping rim would be my choice. With a wide rim such as this, a very small curve, either convex or concave would also add to it's appeal. As you know, I'm big on curves.

Wally

Re: Spalted White Birch Bowl

#4

Re: Spalted White Birch Bowl

George Van in WI

>Just heading out the door to remove 22� of snow from my driveway and others, it is really white outside, just like the pictures!

Thanks for the compliment Sean. I will see you next year for another good time. Will you still be in Az in August?

Thanks for the suggestions Wally, are you saying you would prefer the top of the rim to be outward sloping with a concave or convex surface? Or the curve outside curve of the bowl to have an outward curve at the rim?

Re: Spalted White Birch Bowl

#5

Re: Spalted White Birch Bowl

Wally Dickerman in Arizona

>George, on a wide rim I like to see the surface of the rim itself slightly curved. It can even be a small ogee curve. The rim could be sloping either inward or outward. Small details can make a big difference in the appeal of a piece.

22 inches of snow? Reminds me of why I'm in Arizona. I can look out the window and see a little bit of snow on the mountaintops.

Wally

Re: Spalted White Birch Bowl

#6

Re: Spalted White Birch Bowl

Mike Schwing from Md.

>SUPERB profile you got there George. That is a difficult shape and you got it right. As for the rim, it doesn't give me any pause, but it is already substantially thick, and if you slope it inward with a concave shape it will look much thicker. If you were going to change it, a slight rounding of one or the other edges would soften the appearance nicely. Great work.

Re: Spalted White Birch Bowl

#7

Re: Spalted White Birch Bowl

Sean Troy

>George, we'll be long gone from Arizona by August. We plan on leaving the middle of June. Get moved in just before the Symposium in Louisville. Now you have another place to visit.

Re: Spalted White Birch Bowl

#8

Keith Tompkins

Re: Spalted White Birch Bowl

Keith Tompkins

>HI George...I agree, a great piece...I really like the flow of the exterior, just right!

Re: Spalted White Birch Bowl

#9

Re: Spalted White Birch Bowl

david

>Nice bowl. Appreciate the comments by Wally. I like curves too!

Re: Spalted White Birch Bowl

#10

Re: Spalted White Birch Bowl

George Van in WI

>Gotcha Wally, the previous few I had an inward slope over the undercut. Not sure why I didn�t on this one. I will keep that in mind on the next ones.

We actually had 27�, took me 3 � hours to open the neighbors � mile, drifted shut driveway, good to be in for the night. We�re pushing 200� this year but maple syrup is just around the corner, then summer and mosquitoes. Wish I could look out my window and see a little bit of a dessert though, maybe a Saguaro cactus amongst the white pine.

Re: Spalted White Birch Bowl

#11

Re: Spalted White Birch Bowl

George Van in WI

>Thanks Mike, I will play with your suggestion on the next bunch.

Re: Spalted White Birch Bowl

#12

Re: Spalted White Birch Bowl

George Van in WI

>Thanks Keith, I appreciate the comment.

Re: Spalted White Birch Bowl

#13

Re: Spalted White Birch Bowl

George Van in WI

>Thanks David, we are very fortunate to have so many talented members here on WC to help improve our talents with their constructive comments.

Re: Spalted White Birch Bowl

#14

Leo Van Der Loo

Re: Spalted White Birch Bowl

Leo Van Der Loo

>Hi George

Spalted Birch, not the easiest of woods to turn, you did a very good job on this one, and have the spalting showing beautifully, as for the rim I would have round it of to the outside, too easy to damage that soft sharp edge, shows the wood off and makes for a nice surprise when it's lighter than expected if picked up.

I'd feel very happy if I had made a bowl as good as this one, thanks for sharing.

Have fun and take care

Leo Van Der Loo

Re: Spalted White Birch Bowl

#15

Re: Spalted White Birch Bowl

George Van in WI

>Thanks Leo, I will have to play with rim treatments a little on my next bowls.

Re: Spalted White Birch Bowl

#16

Re: Spalted White Birch Bowl

Rick in Colgate, Wi

>Beautiful bowl George!

I cant figure out how you can find time to turn when you are either plowing snow or playing in it!

Rick

Re: Spalted White Birch Bowl

#17

Re: Spalted White Birch Bowl

George Van in WI

>Thanks Rick. Split Personality :-))