Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

36 grit blue wheel

Posts

36 grit blue wheel

#1

36 grit blue wheel

john lucas

>Woodcraft in Nashville had these on the half price table. I picked one up. $15. I want a wheel to reshape tools so when I wear out the current wheels I'm going to a 36 grit on one side 60 or 80 on the other side. Will probably go with the Norton wheels to see how I like them.

I have 100 grit white wheels on there now and I think that's too fine a grit. I know people will argue, and there are times when I do hone the edge to get it sharper but most of the time it's not needed and when I don't get the jig in exactly the right position it takes too long to reestablish a clean edge.

I've been observing this question for a long time on all the boards and at demo's and 60 or 80 seem to be the norm for the professional turners.

Re: 36 grit blue wheel

#2

Re: 36 grit blue wheel

Carole Valentine

>John, 36 should make quick work of reshaping! My main wheel (the one I chipped) was a 60 grit and I found it fine for both shaping and general sharpening. The other wheel that came with the grinder was a 120 grit. I never use that wheel for gouges but I do use it for parting tools and skews. When it wears out I will probably go with 100 grit. I ordered a Norton 3x to replace my damaged 60 grit wheel. Am wondering if I will see a difference worth the dollars!

Re: 36 grit blue wheel

#3

Re: 36 grit blue wheel

John Lucas

>Carole I've wondered the same but supposedly the blue wheels last longer than the white. We'll see.

Re: 36 grit blue wheel

#4

Re: 36 grit blue wheel

Mike from St. Clair Shores

>Another thing to think about when buying a wheel is the hardness. You want a J or K.

Re: 36 grit blue wheel

#5

Re: 36 grit blue wheel

Don Evans

>How about a report back from both of you know your findings?

Don

Re: 36 grit blue wheel

#6

Re: 36 grit blue wheel

Carole Valentine

>Well I would, but it seems that the Norton 3x 60grit 8" wheels are back ordered just about everywhere. I ended up just getting one of Highland Hardware's premium wheels...only because I didn't want to wait 3 - 4 weeks and I already had some other stuff in the order that I needed.