WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Catalpa?

Posts

Catalpa?

#1

Catalpa?

Dave Belser

>I've spotted a large-ish downed limb of a catalpa tree (about 10" dia) and I'm wondering if I should pursue it. Any comments about or experiences with catalpa would be appreciated. The limb is rather twisty with many branches. I'm assuming it's a northern catalpa as I'm in NH.

- Dave

Re: Catalpa?

#2

Re: Catalpa? *LINK*

Bill Turpin in WNC mountains

>Catalpa (India cigar tree) is a fairly soft wood with some wonderful grain. Catalpa also known as the fishing worm tree, gets very large catapillars that make wonderful bream bait. Look at the attached link, mountain gallery, June 2005 for Bob Heltman's bowl. He turned it, sanded to 220, then burned the winter grain with a micro torch. He then sealed the soot with shellac before re-sanding. This kept the black from bleeding into softer, white summer grain. When the shellac was throughly cured, he sanded and finished. I furnished the bowl blank. Catalpa, even when edge sealed, gets significant end-grain weather cracks. However they usually penetrate only an inch. Cut the blanks a little long if possible. Good luck

Bill in WNC mountains


CMW web site

Re: Catalpa?

#3

Re: Catalpa?

Dave Belser

>Thats a nice bowl Bill. I like the burn effect. God, every time I turn around there is one more angle to turning that I want to try out! The CMW web site is quite impressive also. I like the idea of the monthly exhibit. How big is the club?

The catalpa that I've spotted is on city property so I'm going to ask about removing it. I hope that they don't get concerned about liability etc. but you never know. I haven't dealt directly with them yet. Usually it's just a matter of talking to the work crew if you can catch them. We will see what happens tomorrow.

Re: Catalpa?

#4

Re: Catalpa?

Allen Neighbors

>Dave, I made a bandsaw box from catalpa once. The sap gummed up my bandsaw blade so bad that I had to change blades twice... read that three blades... making a box with 8 drawers..

Absolutely beautiful wood... absolutely sorry wood to cut on a bandsaw. I've never turned any, but would bet it turns nice.... Good luck with this...

Allen

Re: Catalpa?

#5

Leo Van Der Loo

Re: Catalpa?

Leo Van Der Loo

>Hi Dave

I have turned some Catalpa (Indian Bean/Cigar tree) the wood is kind of soft but turns well, it has an oily smell, like paint thinner, not to bad though, I have some chunks still inside my shop, for a year or two, they sure do not split and check like other wood, also drying has been without any problems, I'll put up a couple of pictures that I have from one of my turnings, as usual the real thing looks better than the pic's.

Have fun and take care

Leo Van Der Loo


img

Re: Catalpa?

#7

Re: Catalpa?

Dave Belser

>The profile on that is beautiful Leo. I guess I'm going for it. We will see if the city is laid back or up tight about someone using a chainsaw on pubilic/city property.

Re: Catalpa?

#8

Re: Catalpa?

Mike from St. Clair Shores

>Leo,

I've been reading your post and looking at your immense selections of turnings and you have never ceased to amaze me. Thanks for sharing all the wonderful pics and I hope that someday I will be able to post some of my work that will have only been possible because of you and all the other experienced turners here on WC.

Thanks,

Mike

Re: Catalpa?

#9

CMW

Bill Turpin in WNC mountains

>Our club is the largest in the AAW, some 400 members. We have a world class demo ten times a year. We meet at the Folk Art Center on the Blue Ridge Parkway. Meetings go from 10:30 on Saturday mornings to 4 PM. They are always FREE and open to the public.

Bill in WNC mountains

Re: Catalpa?

#10

Leo Van Der Loo

Re: Catalpa?

Leo Van Der Loo

>Hi Dave, with a bit of luck they will cut it up for you, take along a couple small turnings to show appreciation, might pay back hundredfold.

Thanks for the compliments also.

Have fun and take care

Leo Van Der Loo

Re: Catalpa?

#12

Re: Catalpa?

Doug

>Soft but turns and finishes well.

Doug


img

Re: Catalpa?

#13

Another   

Doug

>


img

Re: Catalpa?

#14

Re: Another

Dave Belser

>I like this second one Doug, it looks like a broken pot - very nice! I have a few roughed pieces that I want to come out looking like artifacts but I'm afraid I didn't plan ahead enough when I roughed them - don't have the confidence to finish them.

Re: Catalpa?

#15

Leo Van Der Loo

Re: Catalpa?

Leo Van Der Loo

>Nice job Doug, especially with that weak soft bark.

Have fun and take care

Leo Van Der Loo