Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Will this hurt anything?

Posts

Will this hurt anything?

#1

Will this hurt anything?

Carole Valentine

>Found a chunk of lead in this piece of English Walnut. Not sure if I should dig it out or leave it in there and try to make it a part of the turning. If I can do that, I think it would look pretty neat! It won't hurt my tools will it? It's very soft (non-ferrous)


img

Re: Will this hurt anything?

#2

Re: Will this hurt anything?

John Lucas

>Carole It won't hurt your tools at all. Just use a mask or dust collection when sanding, you don't want to breath that stuff. You can actually turn aluminum, brass and copper with HSS woodturning tools. Softer metals like pewter and lead you can turn with just about any tools.

Re: Will this hurt anything?

#3

Re: Will this hurt anything?

David Breth

>And be mighty sure it is in that wood BUT GOOD. Nobody wants hot lead flying aroung the shop.

Re: Will this hurt anything?

#4

Amazing color on that piece!

david

>

Re: Will this hurt anything?

#5

Re: Will this hurt anything?

georgetroy

>Go for it Carole, for a person of your ability anything is possible. That is a nice looking piece of wood. When you bring it to round it looks like you can lose your lead. GT

Re: Will this hurt anything?

#6

Re: Will this hurt anything?

Carole Valentine

>Yeah, Geroge, I think that is what is going to happen. But I'll try. I'm going to try and probe to see how deep it goes...don't want it to come flying out accidentally.

Re: Will this hurt anything?

#7

Re: Will this hurt anything?

Ron in Drums PA

>I have a few walnut boards with lead buck shot embeded in them. I thought I ruined my planner blades when I saw that shinny metal, but it didn't hurt them at all.

Just apply some CA glue so the lead doesn't come flying out at you.

Re: Will this hurt anything?

#8

Dick Hines

Re: Will this hurt anything?

Dick Hines

>If it is lead it will not hurt anything to leave it there unless you are goinh to use the piece for food.

Re: Will this hurt anything?

#9

Keith Tompkins

Re: Will this hurt anything?

Keith Tompkins

>Hi Carole, I hit two nails on the same piece...only minor damage to the tool, cut the nails cleanly! Packard 2030 gouge only needed minor resharpening.

Re: Will this hurt anything?

#10

I cut a lot of walnut in California

Don Henthorn

>and regularly found lead bullets in the bowls I turned. Just once did I get one that came out perfectly. The bulley was located so that its perfect outline showed on both the inside and outside of the bowl. Should have kept it as a converdation piece, but gave it away many years ago.

Re: Will this hurt anything?

#11

Is It A Bullet?

Barry Turner

>Your piece of lead may be a bullet. A friend of mine, Ray Sandusky, turned a maple ginger jar with a Civil War era bullet firmly embedded in the side. Makes a wonderful conversation piece. He lives near Franklin, TN where a number of Civil War battles were fought. The tree came from near there. You can see it at www.artisticwoods.com

Re: Will this hurt anything?

#12

Re: Is It A Bullet?

Carole Valentine

>Yep. Dug it out and it looks like a 22 long. Dug 3 more out of the inside of that one piece of wood. Obviously someone had used the tree for target practice.

Re: Will this hurt anything?

#13

Re: Is It A Bullet?

n2wood

>Carole have you ever heard of squirrel hunting? Walnut & oak trees are a good place to look for bullets from hunters. I think it must be something about the nuts and acorns ;{)

Re: Will this hurt anything?

#14

Re: Is It A Bullet?

Barry Turner

>As I recall, my friend's maple tree had a Civil War Minie Ball embedded.....doubt it was target practice......just a bullet that missed it's mark.........