Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Powermatic 3520 tool storage

Posts

Powermatic 3520 tool storage

#1

Powermatic 3520 tool storage

Mike from St. Clair Shores

>In the past year I've went from a flat worker to almost exclusively turning. When I got my powermatic, I put it in the only space left in my shop. It worked out well for a while, the tools were mounted on the wall and the grinder and chucks etc. went on a workbench behind me.

But recently, I decided to move the lathe more out in the open and put the workbech up against the wall. When I did this I had no where close to put my tools, so I came up with this solution, let me know what you think or if you have aquestions about how it works.

Thanks, MIke


img

Re: Powermatic 3520 tool storage

#2

Re: Powermatic 3520 tool storage

Mike from St. Clair Shores

>Here's another picture.


img

Re: Powermatic 3520 tool storage

#3

Re: Powermatic 3520 tool storage

Mike from St. Clair Shores

>Here is a photo of the storage while it was in construction. It holds 28 tools on the inside and about 20 on the outside. Also there is storage on the outside for drive centers etc. etc.


img

Re: Powermatic 3520 tool storage

#4

No Mike, No!! :-)

Jim Shaver - Oakville, Ontario

>Hi Mike,

Ah no, not another flat guy gone round....awe....

:-)

I understand the temptation and the feeling to let go of your flat side, but balance .....wink wink!

Well being a flat guy I can see that you still have a sense for making things that serve a shop function...I like the idea of what you have created, but I am wondering if all that space will be covered in shavings as soon as you get going...or maybe that's not such a problem....great idea though, you look ready to fill it with lots of tools...

So are you having a sale on some other shop tools?

:-)

I don't know how many flat people have gone totally round, but it's a common path....how absolutley frightening that is....(repeating to myself.."furniture, furniture, furniture....").

:-)

Take care,

Jim

Re: Powermatic 3520 tool storage

#5

Re: Powermatic 3520 tool storage

Mike from St. Clair Shores

>Here is one last picture to show the drive centers etc. while it was in construction. I turned several bowls before deciding to paint. The shavings were easily blown off with an air hose I keep next to the lathe.


img

Re: Powermatic 3520 tool storage

#6

Re: Powermatic 3520 tool storage

Wally Dickerman in Arizona

>Looks good. You asked for comments so I'll say that, mostly from a safety point of view, I don't like a tool rack that requires me to reach across the lathe bed, and over a spinning piece of wood to get a tool. I have a wall rack behind me for tools and a small, easily moved, one-legged table to hold tools that are being used. Works well for me.

Wally

Re: Powermatic 3520 tool storage

#7

Re: Powermatic 3520 tool storage

gary s clarke

>Here is what I use for tool storage, an idea I got from Russ. I have the cabinet on wheels and find it very convenient for my little shop as I can move it out of the way for other projects.


img

Re: Powermatic 3520 tool storage

#8

Re: Powermatic 3520 tool storage

Norm Smith in Nova Scotia

>Great ideas but I agree with Wally. However, your shops are too clean. If my wife sees these photos I will be dead meat.

Norm

Re: Powermatic 3520 tool storage

#9

Way too small

Phil Joines Krum,Tx

>You must be just getting started. There needs to be space for at least 100. :>)