Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

$300-$700 lathes

Posts

$300-$700 lathes

#1

$300-$700 lathes

john lucas

>I get asked quite often what lathe to buy and I like to recommend the mini lathes as good starter lathes but quite often they want a bigger lathe but don't want to spend much money. (been there, done that) I thought I would ask what you all think of the lathes in this price range. Grizzley has 3. Go584,G0462 and G1067Z One downside of their lathes is the odd spindle thread size however the 16" has a 1" spindle. If you have one of these lathes I would like to hear about it.

Jet has a 12" lathe in this price range, the 1236. Anyone have any experience on this one.

Delta has a 14" that is in this price range. the 46-715

I loaned out my Harbour Freight catalog so I can't look there. Oops forgot about thier website. I'll do some digging.

Anyone know of any others. I thought this information might be good for the group.

Re: $300-$700 lathes

#2

Go used

T Daniel

>John, a person can get a good used lathe for $700. The old Powermatic 90 was a very good lathe and it can be modified to make it even better. Many of the old lathes perform well once converted to variable speed and some can be modified to increase the swing. I do not care for the Jet 1236 or the Grizzly lathes; I would much rather have a used lathe of better quality.

Re: $300-$700 lathes

#3

Brad Vietje

What He Said !

Brad Vietje

>As an oft-frustrated 1236 veteran, I can assure you that there are many ways this lathe could be improved, and probably still keep the price in this range. I just don't think there is any will for WMH to do this.

A good old Powermatic, General, or Delta lathe will usually be better bet. The bearings can usually be replaced, if needed, and the machines made 30 - 50 years ago are much more solid and trouble free. An aspiring turner should still look to the nearest AAW club first, and there will probably be someone in the club who can assist a newbie in evaluating and selecting a decent used lathe.

Safe Spinning,

Brad Vietje

Newbury, VT

Re: $300-$700 lathes

#4

Re: $300-$700 lathes

Barry Turner

>For Christmas 2001, my wife told me she would buy me a new lathe. We went to a store near our home that sold woodworking machinery and I quickly settled on a Jet Mini Lathe. My wife tried to talk me up to a Jet 1236 because she thought I would outgrow the Mini too quickly. I declined because I thought the Mini was a much better lathe than the 1236. Smoother and quieter. Five years later, my Mini continues to serve me well, although I did eventually buy a larger lathe last year (a Stubby 750). I still use the Mini for small items. If I was buying a lathe in the $300 to $700 price range, I would probably go for a Jet 1236 because of the good service I have had from the Mini.

Re: $300-$700 lathes

#5

Re: Grizzly

Allen Neighbors

>John, I have a 10" Grizzly that was just one step under the 1067 when I bought it. I've turned quite a bit on it these last 18 months. Here's what I don't like about it:

I had to do a little re-engineering to get the headstock and tailstock to line up... but it wasn't a lot. Just a little grinding.

The slowest speed is too fast.

Cast iron tool rest that I've replaced... twice.

It's not big enough.

I've done a lot of research, and if I had it to do over, I'd go with Oneway or Vega.

Hindsight is 20/20. Should have saved up a little more and got a bigger lathe to start with.

Re: $300-$700 lathes

#6

Re: $300-$700 lathes

Phil Joines

>I wouldn't buy anything with a reeves drive, no matter what the price.

Re: $300-$700 lathes

#7

Lone voice for in-expensive Craftsman lathes

Lou Krupnick

>Recommend your looking at the new Craftsman 1 Hp lathe. I spent some time comparing the Jet, Delta & after talking to the local Woodcraft store, decided on the Craftsman. With the exception of the stand, light gage steel, the fit & finish of the machine is good.

Nice, well machined C.I. ways, strong beefy tool rest & good alignment between head & tail stock. Reasonably quiet, 14" swing w/ low speed of 400 rpm. For less than $500, its a good intro machine.

Lou

Re: $300-$700 lathes

#8

JL

Re: $300-$700 lathes

JL

>Speaking as someone who has a Delta 46-715... (which I have since upgraded).

The stand is stamped sheet metal - for serious use, mount the bed on a shop built stand. The power is okay. The bed is good. There is some vibration due to the drive (and belts), but that can be adjusted and reworked to minimize it. All in all, if I had to do it again, I would have just bought a Jet 1642 (or the Jet mini) in the first place. I'll be setting the 46-715 as a buffing system and spare lathe in my new shop.

Re: $300-$700 lathes

#9

Re: What He Said !

john lucas

>Terry and Brad I would agree and that's exactly what I did. I upgraded from a Delta 46-700 to an old J-Line that I highly modified. However I find many woodturners who don't know the first thing about tinkering with mechanical stuff. We all grew up working on our own cars or working on the farm but many of todays younger generation never got the chances we did. I have modified or at least realigned every woodworking machine I have. I know many very good woodworkers who don't have the slightest idea how to do this stuff.

Re: $300-$700 lathes

#10

Re: $300-$700 lathes

john lucas

>I disagree. They do require maintenance from time to time. A good cleaning and re greasing and they run great. None of that electrical stuff to fail. I would agree that they can be noisy and don't have a slow speed. I've had one good one and one bad one. The Delta always had vibration problems, even with new pulleys. The powermatic always worked well except for the occasional cleaning.

Re: $300-$700 lathes

#11

Re: Lone voice for in-expensive Craftsman lathes

john lucas

>Lou I forgot about the craftsman. I have heard so many bad things about this machine I probably left it out on accidentally on purpose or something like that.

Re: $300-$700 lathes

#12

Re: $300-$700 lathes

john lucas

>The Jet 16 is a little more expensive but a whole lot better than any that I mentioned. It's one of the best buys on the market I think.

Re: $300-$700 lathes

#13

Re: $300-$700 lathes, Not Delta

Steve in NC

>After fighting with the vibrations of the Delta 46-715, I bought a Jet mini and love it. I am wating on Delta to send new part to fix the reves drive and hope to use it for larger items. My recommendation would be to stay away from the Delta, although they have been great with the replacement parts.

My question is, what is the step up from the Delta. Can you get a decent 14-16" lathe for under $2,000. I sure do not want to get another compromise tool.

Re: $300-$700 lathes

#14

Re: $300-$700 lathes, Not Delta

John Lucas

>The Jet 16" is a really good lathe for under $2000. sounds like you are having the same problems I had with the 46-700 Delta. It isn't a bad lathe, I turned a lot of stuff on it but I didn't realize how bad it vibrated until I bought the Nova Comet mini lathe. It ran so much smoother.

Re: $300-$700 lathes

#15

Ditto...

Peter Teubel

>Had two lathes with Reeves. They worked but both were kinda fussy.

Re: $300-$700 lathes

#16

Ric Taylor

Re: $300-$700 lathes

Ric Taylor

>I started out with a used Jet 1236. It had been a demonstrator in the classroom at the Cutting Edge for several years, and it had been used quite a bit. When Jet changed from blue to cream, all the machines in the store were replaced, and I picked up the lathe.

It served me well for several years, although it did have some limitations. When I upgraded to the Jet 1642, I sold the 1236 for the same amount that I had paid for it.

Ric

Re: $300-$700 lathes

#17

Brad Vietje

Re: $300-$700 lathes, Not Delta

Brad Vietje

>I's agree that the Jet 1642 is a pretty good machine for the price, though I've only used one for about 10 minutes. I think the Nova DVR is probably even better -- but needs either shop-built stand, or their cast iron legs for extra $$$. General also makes some very nice lathes in this range -- solid, rugged, reliable, and Canadian made.

Safe Spinning,

Brad Vietje

Newbury, VT

Re: $300-$700 lathes

#18

Brad Vietje

The old Delta's were pretty good.

Brad Vietje

>

Re: $300-$700 lathes

#19

Re: The old Delta's were pretty good.

Arch

>Hi Brad, I agree about the old Deltas being good machines. Like the old South Bends did for budding machinists, they helped teach a lot of woodturners. I guess Nova 3000's are now considered "old". They may not be pretty, but with electronic VS, I think they are still pretty good value, if you can find one.

Re: $300-$700 lathes

#20

Griz HD lathe ownere

Ron Bauman

>John: I own a Griz HD (their most HD, its in the shop or I'd give you the number) I would never buy one again. There is a single bearing in the headstock so if you try anything of weight outboard it will wobble all over the place. The tailstock has a strange feed system that will not allow me to apply much pressure when turning between centers. I've got a PM90 under reconstruction; never enough time to work on it. There are PM90s all over the place from $600 to $1500 ready to go. I bought mine in parts from all over the USA. Would tend to buy one whole next time out. Be careful of the speed you buy. They built them with truly high end (4000rpm) on some models for spinning metal. On the whole it is a solid unit, heavy cast iron good bearings, etc. Hope this helps.

Re: $300-$700 lathes

#21

Re: The old Delta's were pretty good.

John Lucas

>The old delta's are great. My best friend has turned on one for about 35 years. I finally talked him into buying a powermatic. The great thing about the old Delta's is there isn't anything on it that can't be repaired or replaced. They are solid if you put the right motor with them, have plenty of power.

Re: $300-$700 lathes

#22

Delta is a brand...not a product!

T Daniel

>I got that quote from further down the board. Pretty true huh?

Re: $300-$700 lathes

#23

Jet 1236

GaryG in MD

>I have used a "cream-colored" Jet 1236 for a couple years and been reasonably satisfied with it. So far, it has done pretty much what I have asked of it. I don't overload it, balance my blanks, don't try to go too fast, and I find that it works quite nicely for pieces up to 11". It has enough power for its size. It can be loaded with sand bags for added stability, but I mostly find that unnecessary unless I'm doing a huge, wet, heavy hunk.

Sure, there are a lot of things they could have done better, but it's not a bad lathe for the money. It has been completely reliable.

On the down side, you should not try to use the banjo extender -- it is dangerous and will break. You will need to buy a MT2-MT2 extender to get more room to work between the headstock and tailstock with the tool rest supplied. The power switch is in a bad place and not easy to use -- you'll want to add your own external safety "off" power switch -- mounting one on magnets on the right end of the bed is very easy. The wheel on the tailstock makes it impossible to use long-handled tools on-axis, when between centers, but that's a common problem to many lathes.

Based on my experience, I'd say that it is a good starting lathe for a beginner. It will have a decent resale value when you are ready to upgrade.

...Gary

Re: $300-$700 lathes

#24

Re: Jet 1236

John Lucas

>Gary I think your right. I've turned on all the lathes I mentioned except the Grizzly's and I like the jet the best in that price range. Then of course there is the Jet 16" in the under $2000 price range.

Re: $300-$700 lathes

#25

Re: $300-$700 lathes-Shopsmith

georgetroy

>I bought a Shopsmith in 1980. I turned on it for 6 years. I still have and use it for most every thing except a lathe. I would rather have a Used Shopsmith like mine in that price range. Than any HF or Grizzly. GT