Perfect is the enemy of Done!
Stokes
>
Knowledge You Can Build On — Est. 1998
Perfect is the enemy of Done!
Stokes
>
Re: Perfectionism
Keith Tompkins
>Mark, your work says it all....over the last few years, the change in your work has been dramatic.....this would not have happened if you settled for "good enough" at some point.
My "learning pieces"...
Ellis Walentine
>...are sitting in boxes in the shop and on shelves in the living room and the kitchen and my office....well, you get the picture. I don't throw them out or burn them unless they actually blow up on the lathe. Thankfully, that doesn't happen too much anymore. We use the ones that are useful, look at the ones that are worth looking at, and stow the rest. Maybe I'll take up skeet shooting someday.
Ellis
Re: My "learning pieces"...
Ruth Niles
>I agree, all my not-so-good pieces are around my shop and holding various supplies. Some started out as good form but for one reason or another never ended up that way. These remind me of the original good form or are spring boards to a better form. I think they serve the same purpose as a drawing pad.
To Carole's original post, we all define "perfection" with a little difference. It's the same as defining "art", it's a personal thing.
Ruth
Russ Says..................
Ruth Niles
>"The more you sand, the more you have to sand"
John, you reminded me of this because, I agree, if a piece is going to realize just so many $$, it just isn't worth the extra sanding that no one is going to even notice anyway. Sometimes I think people sand to 1200 just because another turner said to but the results or differences after 400 just aren't there.
Ruth
Re: Russ Says..................
T Daniel
>Ruth, I generally agree with your statement about going above 400 grit, however, there are woods that make it worthwhile to keep going, cherry for one. It just all comes down to the value of your time; what is your time worth to you and what is it worth to someone who is paying for it? I agree with Bill G., if it is going to be used then why worry about tiny sanding scratches (I said Tiny) on the inside of a piece. There are two people to please; yourself and your customer. Don't be harder to please than your customer if you want to make a profit.