Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

My Turning Exchange Piece From Bill G. Arrived!

Posts

My Turning Exchange Piece From Bill G. Arrived!

#1

My Turning Exchange Piece From Bill G. Arrived!

David Propst

>Yesterday morning I received a beautiful hollow vessel of Norway maple from Bill Grumbine. I do not have time to photograph it this weekend, but I think Bill has pictures. If not, I'll post some early next week. The piece has a cool yin-yang quality. On one side, the piece is clear quilted figure which is extraordinary. The other is contrasted with very heavy spalting. I love the piece! Thank you much so Bill!

Best Regards,

David

Hi-ho, it's off to work I go...

Re: My Turning Exchange Piece From Bill G. Arrived!

#2

Re: My Turning Exchange Piece From Bill G. Arrived

Jim Shaver - Oakville, Ontario

>Hi David,

That is great that you receieved an exchange with Bill.

I want to thank you again for doing this, it's been a great community building event and tons of fun to watch..Thank You David!

Take care,

Jim

Re: My Turning Exchange Piece From Bill G. Arrived!

#3

Re: My Turning Exchange Piece From Bill G. Arrived

Bill Grumbine (Kutztown PA)

>Thanks David! I am glad you liked it. To everyone else, I couldn't post pics of my piece when I mailed it, since I was in the unusual position of having my exchage partner know who I was from the beginning. So here it is for everyone else to see. This piece of wood came from a Norway maple tree, right at the base and from one of the buttresses. The tree was one of a line that was cut down at a cemetery local to me. I rescued the stumps before they went to the firewood pile. There is a guy out there who is burning this stuff!

Here is the one side. It is very heavily spalted, so much so that it required a large quantity of Minwax Wood Hardener to make it hard enough to turn. Of course, if David gets bored with looking at this side, there is always the other:

Overall size is about 5" high and 5" around at the base. Wall thickness is a fat 1/8", with just a little extra in the base in case David's SWMBO Jennifer wants to put some dried flowers in the thing. It is finished with Bush Oil and buffed on the Beall wheels.

Bill

Re: My Turning Exchange Piece From Bill G. Arrived!

#4

Re: My Turning Exchange Piece From Bill G. Arrived

Mike from St. Clair Shores

>Wow, what a beautiful piece. That wood is really nice and the form fits it perfectly.

Mike

Re: My Turning Exchange Piece From Bill G. Arrived!

#5

Absolutely Beautiful, Bill.

RevDoug

>

Re: My Turning Exchange Piece From Bill G. Arrived!

#6

Re: My Turning Exchange Piece From Bill G. Arrived

Jennifer@Indy.USA

>Nice one Bill. Love the form and the soft rimmed opening. Not a shabby piece of wood either :)

Jen

Re: My Turning Exchange Piece From Bill G. Arrived!

#7

Biill, please say it ain't so..

Gerry Meekins in Maryland

>There's a guy burning this maple?? Brings a tear to my eye.. Beautiful piece of wood and a wonderful turning you have made from it Bill!

Gerry

Re: My Turning Exchange Piece From Bill G. Arrived!

#8

Re: My Turning Exchange Piece From Bill G. Arrived

George Van in WI

>Wow Bill, you do know how to find the good wood and make it look better. Was this from the stump above or below the ground?

Re: My Turning Exchange Piece From Bill G. Arrived!

#9

Re: My Turning Exchange Piece From Bill G. Arrived

Ernie Miller

>It seems kinda strange that you would draw one of the good turners and not one of the hacks like me? Did you ever get the pen blanks? Will they work to inspire you to turn somthing good?

Re: My Turning Exchange Piece From Bill G. Arrived!

#10

Re: My Turning Exchange Piece From Bill G. Arrived

Bill Grumbine (Kutztown PA)

>Thanks everyone!

Gerry, this wood has been burned, past tense. This piece is about four or five years old.

George, this is from the buttress right above ground level.

Ernie, it does look suspicious, but David even put his name back in the hat when late comers showed up just because of that. Just lucky I guess, or maybe he was just stuck with me. ;-)

Bill

Re: My Turning Exchange Piece From Bill G. Arrived!

#11

I had hoped I'd draw Bill so

Charlie Anderson

>he would see how far I've come but how much further I have to go and invite me up for more lessons!

Actually, Bill, it's time for my annual visit to my aunts in Allentown. I'll have to stop by to at least say hi but maybe tryout that new lathe.