Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Anchorseal questions

Posts

Anchorseal questions

#1

Anchorseal questions

JKJ in East TN

>I'm looking for source for Anchorseal (or equiv.) in a large container. I've been buying it a gallon at a time from Woodcraft but it's too expensive for treating logs. Google tells me Anchorseal is available from UC Coatings, Log Home Store, Weekes Forest Products, and other places. Before I start calling, has anyone have experience with these companies?

I see that Steven Russell in an article here on WC mentions another product called Mobil-Cer M. However, I can't find a source. Is this still available? I found a lot of discussion about it from Austrailia and NZ.

I found a reference on the Forestry Forum about another product from ACI (Associated Chemists, Inc.) which was supposed to be about 1/2 the cost of Anchorseal. This reference was about a year old. Has anyone tried this or know anything about it?

Are there any disadvantages to the Anchorseal forumulated with antifreeze? (I'd like to store the drum in the barn rather than in the garage.)

I read where one guy was diluting Anchorseal with 50% water and said it still works OK but dries a little faster. Anyone try that?

JKJ

Re: Anchorseal questions

#2

Re: Anchorseal questions

adrien

>I think I got my 5 gallons from UC coatings. their site is a puzzle as to price. I paid about $45. No problem with delivery. The anti freeze is a good idea if you're going to leave it in an unheated area where temperature drops below freezing.

Re: Anchorseal questions

#3

Re: Anchorseal questions

John Lucas

>John e-mail me at home johnclucas@charter.net and I'll give you Marion Randolph's phone # unless you already have it. He bought a bunch of it for our club in crossville and would probably give you the address. John

Re: Anchorseal questions

#4

Re: Anchorseal questions

Dave Peebles Lyons, Ohio!

>Hi John,

Our club just bought a 55 gallon drum of it from UC Coatings I believe. Anyhow, it is the one from Buffalo N.Y.

We were able to sell it for 33.00 for five gallons and 7.00 per gallon to club members. This was even after the shipping was included.

I will be picking up my five gallon container this Saturday. :)

This should last me until I am too old to find the on/off switch on the lathe. :)

Dave

Re: Anchorseal questions

#5

Anchorseal questions

Terry Quiram, Roanoke Illinois

>Our club also buys a 55 gal barrell each year. We resell $6 for members and $7.50 to non members. https://www.uccoatings.com/prod_anchorseal.php

Terry

Re: Anchorseal questions

#6

Re: Anchorseal questions

Pat Mulligan

>I wouldn't dilute it.I got mine from Bailey's and am not sure if it'sanchor seal or another product but after 6 mos. I've had cracking start on some cherry. I read a post on wow that said the anti-freeze version is good and will keep longer.

Re: Anchorseal questions

#7

Re: Anchorseal questions

Gary Evans Tallassee, TN

>Hi John,

UC Coatings is the manufacturer of Anchorseal. They are a good bunch to deal with. They once sent me a nice little acrylic clock just because I mentioned on this forum how much I liked their product.

Their new price list shows the 55 gal drum for $4.10 per gallon, FOB Buffalo. If you want the 5 gal, it's $51.40, including shipping in the Eastern US.

I've never tried other products, but I'm sold on Anchorseal. It does what it says it will do. Get it with the anti-freeze. It's basically water and wax.

Gary

Re: Anchorseal questions

#8

Well Darn Gary

Barbara Gill, Remlik VA

>I have praised Anchor Seal for years; in fact I bought a 55-gal. drum this spring. The never sent me a clock. :-)

My complete answer was posted on the flat side.

Re: Anchorseal questions

#9

Re: Anchorseal questions

Jim Pugh, Ohio

>Pat, Anchorseal, or any other sealer for that matter, are not forever. They will delay cracking until you can process the wood but you have to go after it in a timely manner. I figure if it holds for 30 days I have been real lucky. The wood is going to dry out and crack no matter what and the sealer just gives you a bit of breathing time. Otherwise it would start cracking from day one.

Re: Anchorseal questions

#10

Re: Anchorseal questions

David Breth

>I've gotten mine direct from UC in Buffalo. Being a Buffalo guy myself you'd think that would help with shipping, but it doesn't - I live too far away for the drive.

David B.

Re: Anchorseal questions

#11

Re: Anchorseal questions

Ed Karch in No.VA

>I bought 5 gallons from UC and a week later got a phone call follow up to make sure I recieved it and was satisfied with the purchase. It seems like a real good outfit.

Re: Anchorseal questions

#12

Re: Anchorseal questions *LINK*

Bill Johnson

>John,

Our club has been buying a product from Willamette Valley called "WAXLOR" it is the same thing (endgrain sealer)and we have been getting it for less cost than the product called Anchorseal. The Club buys in quanity and distributes it to members for $6.00 a gallon and the club makes a few cents on each gallon.

The URL to this company for more information is: http://www.wilvaco.com/index.html


End grain sealer

Re: Anchorseal questions

#13

Re: Anchorseal questions

The Wood Spinner / Bill Hale

>A couple of years back I tried to get Mobil-Cer M.

I could not even finde anyone at Mobil who had any idea what part of their company had it. They did know it is one of their products.

I knew a wood harvestor who used it in a oump up sprayer and said it was great.

Bill in Casa Grande, AZ.

Re: Anchorseal questions

#14

Re: Anchorseal questions *LINK*

The Wood Spinner / Bill Hale

>I just did a quick Google on MobilCer-M and here is a link.

$ 86.00 per drum is not bad, Boston MA.

Site says ask about our freight allowance !

Bill in Casa Grande, AZ.


http://www.polygonwax.com/emulsions.html

Re: Anchorseal questions

#15

Revision to good $

The Wood Spinner / Bill Hale

>Boy did I blow that. Small print $0.86 per lb.( not $ 86.00 per drum) @ 400 + lbs per drum = $ 6.65 per gal + freight NO NO NO

Sorry Bill

Re: Anchorseal questions

#16

Re: Well Darn Gary

Gary Evans Tallassee, TN

>Hi Barbara,

I think I got the clock because someone mentioned that I recommended the product when they were ordering their Anchorseal.

Gary

Re: Anchorseal questions

#17

thanks - Re: Anchorseal questions

JKJ in East TN

>Thanks - I've got some great info now. I'll get on the phone tomorrow.

JKJ